Replace Side View Mirror Glass on a Honda or Acura EASY! 2019 Acura MDX
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2020
- In this video, I show you how to replace just the Mirror piece on a 2019 Acura MDX. The procedure should be the same for most Honda’s and Acura’s around the same year.
My friend backed into something and cracked it, but did not want to replace the whole housing assembly. The glass was cheap from the dealership and easy to replace!
All you’ll need is a plastic trim tool or equivalent and some alcohol to clean the adhesive surface. Make sure to wear safety glasses while doing this and take your time! Slow and steady wins the race.
If there are any questions, please comment them below. Thanks for watching! - ยานยนต์และพาหนะ
Great explanation in very simple fashion. Based on this video I feel confident to replace my broken mirror on 2017 Acura MDX. Thankyou!
This is a perfect video. Changed out broken glass in 6 minutes and saved $320 from dealer quote Thank you!
Thanks for this instruction. I followed your instructions to a tee, and it made short work of my mirror replacement. Awesome!
Awesome! Glad it helped :)
Thanks so much it works wonders!
Sooooo helpful. thank you for this content!
Thank you for the helpful video!
This video was helpful. Thanks!
Excellent presentation.
Helpful! Hope I can replace mine....replacement glass was cheap and I am sure Acura would try to sell me a whole new mirror!!!!
Susan Levin Glad it helped! It was super easy it was my first time doing it Andi figured it out quickly. Just pay attention to the little tricks I said in the video and you’ll be fine :)
Yes. The will.
I have a problem with my side mirror it’s shaky it’s off track it’s anyway to tighten it up are I have to get a replacement for my 2020 MDX
I am looking to replace my puddle lights since both of them have dimmed. Anyone have any insight on how to do that? Maybe a video? Thanks.
Thanks for sharing! I just wondering is that the same on 2016MDX ?
I am sure it would be very similar :) anytime!
@@tunerworld thanks for such quick reply!
Anytime :)
Can i remove my mirror caps with out tools or do i need to remove the mirror for that
Im trying to vinyl wrap it???
Alexander G Rodriguez I cant remember off the top of my head how I did it before. I don’t think you have to take the mirror off though! You could probably just take the whole mirror off
But I can close it and open it back and fw but if I take it to a car wash I’m thinking it will pop off that’s how shaky a lil and you hear a cracking sound closing it and opening it sorry folding it and un-folding it back
How hard did you push??? Can't figure out how to snap back the bottom clips (when putting the new glass)... I applied pressure as shown but no dice =(( Maybe I need to go to the gym...
Haha you have to put a decent amount of force on it forsure. Just make sure you spread it evenly and you don’t have to worry about any cracking! It took me a few tries as well as I was scared to put too much pressure
From my memory I wrapped my fingers around the back housing and used my palms to push in
Thanks for the quick reply! Still trying but having no luck. When I push the glass, I think the white part also moves/flexes with the glass. So the clips have nothing to push against and snap into place...
What is decent amount of pressure? Is it like pushing a car out of a ditch amount?
Update:
Managed to get the mirrors on.
What helped was getting a copy of the service manual. For reinstall, it says to _"carefully push on the _*_clip areas_*_ of the mirror holder until the mirror holder locks into place"_
So the official way to put back the mirror is to push. Knowing this made me less nervous about applying pressure. I'm weak physically, so for me this was "pushing a fridge (but carefully)" amount of pressure. Also knowing where to focus the pressure was very helpful.
Bro help with the bottom clips . . I’m depressed at this point 😂😂
It's been a while, but I remember having to use more force (but gently) than I was comfortable with. And the force was applied on the clip locations.
Good luck!
^Yep! Just apply more force but do it evenly so you don’t hurt yourself haha. Wear gloves worse case
Ok
What's the point of making this video if you dnt show how uts done
Wobble
The least helpful guide I have ever seen lol
It helped you though don’t deny it