Very clear description. I ordered one from talontunes and I'm still waiting. They're much in demand and most companies don't have any inventory. Thanks again good show
Hi. Very good video thank you. I have a new mk2 crown also in.22cal. I noticed your power wheel is the new version like mine. Do you have any problems with it coming loose from rotations. Mine comes loose easily.
HELLO NICE VIDEO , ALWAYS A PLEASURE TO SEE YOU BUSY WITH THE FX AIR GUNS . BUT I DO HAVE A QUESTION ABOUT THE 23 POSISION POWER WHEEL IN THIS VIDEO, CAN YOU BUY IT SEPARATELY AND MOUNT IT ON THE PREVIOUS VERSION OF THE CROWN MK1 ? AND IF SO CAN YOU MAYBE MAKE A VIDEO OF THAT, I THINK THERE ARE A LOT OF AIRGUNNERS WHO WOULD BUY THESE IF THEY KNEW ABOUT IT. GREETINGS FROM BELGIUM
Hey 👋 je hoeft niet ik hoofdletters te schrijven hoor 😉 . Het power wheel met 23pos is apart verkrijgbaar en past op de vorige versies. Installatie is zeer simpel met een schroefje .
Great video, managed to get around 62 ft.lbs with the jsb king heavy's 25cal at around 920 fps. Altough i get a deviation around 30 fps sometimes , thinking there is more to improve
Amazing instructions, may you tell me how much the maximum energy FX crown MKII 0.22 700mm can produce without any aftermarkets? have you figure it out ?
Beautiful stock. Love your content. Keep up the Good Work. Have a few questions, What is the tread specs and diameter for the Digital Guage? Looking to upgrade my Crown. Can both guages be converted to digital?
Question can you use the tension barrel on the crown I have crown Iraq 8888 special edition coming to me it has the upgraded slug parts and I believe a tungsten hammer
Have you changed the transfer port to dual transfer port or is it the factory settings? Coz with reg @150 and hammer spring max out I still get 890 with jsb 18.13.
With the crown MKII you get the FX barrel that has two sides on the transferport. You just need to rotate it to the side you want to use 😉 in combination with that I use a Huma probe with larger opening
Hi,is it critical to have dial turned fully up(23) or fully down(1) settings before removing the wheel before making the adjustments with allen key or dies it matter?
Not really if you know what you are doing 😉 the most important is to see where the metal balls underneath have to sit en meet with the appropriate spot on the power wheel. If you stick them with grease against the power wheel then you can’t go wrong . The explanation about putting it back at the same spot is for the rookies 😉
Hello mate. Pretty nice video. Love my FX Crown on Sinthetic stock. Even I bought for him a .177 500mm barrel. Had some issues: once I tried to disassemble the rifle and lost the springs on that wheel. Later when trying to re assemble put the screw on a wrong position and ruined the threads. My gunsmith fixed it. Later on when trying to adapt a picatinny rail by myself, shot the rifle when air tank pressure was lower than regulator pressure. Psssss, all air went out trough the barrel. Again ro the gunsmith. That specific point of needing to disassembling all the rifle to change hammerspring level is only one of two defects I see for this rifle. Other one is not having a magnet to fix magazine to the stock. We need to talk man. What barrel liner are you using to shoot those slugs? The standard slx light liner? Or the heavy one? Regarding adjustability, FX intention is good. This same rifle Can be used for hunting, for field target, for BenchRest at 25, 75 and 100m and more. But. I want to know his limits when using slugs. Congratulations for this video and the chanel. Cheers
Hi mate , yes there are a few things to keep in count when shooting pcp’s or you can end up by the gunsmith 😉 but I advise to watch many YT videos and you will be able to do those repairs by yourself very easily! If you take care of them you will hardly have any problems with them . Regarding my setup I am shooting at hammerspring #20 with the internal hammerspring near to max out and the regulator at 145bar this gives me about 960fps with 22gr slugs in the 700mm . You can raise the regulator pressure up to 160bar but don’t go higher then that as it can damage stuff
What a Beautiful Rifle! I haven't even bought my first FX and now I want another one. Damn You FX!!! LOL Really enjoy your content, very informative. Thank you. Couple of questions/thoughts; can the huma dual port fit on the Crown (MKII) barrel assembly? Could the internal bottle Regulator of the M3 be used to give this Rifle a dual Reg setup?
Hi thx for the support, I must warn you 😉 airguns are addictive 😂 The Huma dual port can be used on the crown barrel no problem . The 2nd regulator isn’t a option though as it’s 100% build for the M3 and doesn’t fit the crown
No for pellets I am switching back to the Huma air high flow pellet probe , because the pin probe doesn’t seat the pellet deep enough. Regards added fps , it depends on the tune you have on the crown
@@fiestamans it doesn’t 100% matches the size of the dual transferport as FX holds on to the one hole port for pellets, Huma has a probe to match the dual side
Thanks for the video! QUESTION: Have you experimented with the transfer port or do you leave it on MED? I have a walnut .22 MK2 with a 500 mm barrel. Reg was factory set to 110 and velocity is too low, I'm looking for around 888 fps with JSB 15.89 gr pellets. I'll make some adjustments tomorrow. Cheers!
I always leave it on high for maximum airflow . If you want to up the power I would start by adjusting the internal hammerspring since you already have 110bar on your regulator. With the 500mm barrel you should get there with ease . Do this in small steps , put your TP on high , powerwheel on 23 and adjust it 1/4 turns up until you get to the 880 fps
Very clear description. I ordered one from talontunes and I'm still waiting. They're much in demand and most companies don't have any inventory. Thanks again good show
Thx for the support 🙏🏻 its a beautiful gun and very comfortable to shoot . Hope you get it soon 🤞🏻
Would really appreciate if you can show how you changed the transfer port
Hi. Very good video thank you. I have a new mk2 crown also in.22cal. I noticed your power wheel is the new version like mine. Do you have any problems with it coming loose from rotations. Mine comes loose easily.
HELLO NICE VIDEO , ALWAYS A PLEASURE TO SEE YOU BUSY WITH THE FX AIR GUNS . BUT I DO HAVE A QUESTION ABOUT THE 23 POSISION POWER WHEEL IN THIS VIDEO, CAN YOU BUY IT SEPARATELY AND MOUNT IT ON THE PREVIOUS VERSION OF THE CROWN MK1 ? AND IF SO CAN YOU MAYBE MAKE A VIDEO OF THAT, I THINK THERE ARE A LOT OF AIRGUNNERS WHO WOULD BUY THESE IF THEY KNEW ABOUT IT. GREETINGS FROM BELGIUM
Hey 👋 je hoeft niet ik hoofdletters te schrijven hoor 😉 . Het power wheel met 23pos is apart verkrijgbaar en past op de vorige versies. Installatie is zeer simpel met een schroefje .
Sooo Sooo Sooo beautiful this stock!
Yeah it’s a real beauty 👍🏻
Great video, managed to get around 62 ft.lbs with the jsb king heavy's 25cal at around 920 fps. Altough i get a deviation around 30 fps sometimes , thinking there is more to improve
The inconsistency is more to do with the hammerspring/regulator balance
Amazing instructions, may you tell me how much the maximum energy FX crown MKII 0.22 700mm can produce without any aftermarkets? have you figure it out ?
Excelent!! Nice video
Great info.
Thanks for sharing 👍
Thx 🙏🏻
Beautiful stock. Love your content. Keep up the Good Work. Have a few questions, What is the tread specs and diameter for the Digital Guage? Looking to upgrade my Crown. Can both guages be converted to digital?
Hi , thx for the support 👍🏻 the thread size is 1/8 bsp and both gauges can be swapped but the regulator one is the most important
thanks for sharing pleasure to watch
Thx
Question, can you put a MK II STOCK ON A MK I GUN ??
Bought an fx crown mk2 continoum.
And dude i want this stock 😃
I think Krale Schietsport sells them
Question can you use the tension barrel on the crown I have crown Iraq 8888 special edition coming to me it has the upgraded slug parts and I believe a tungsten hammer
Mooie video weer!!! Groeten uit Eindhoven!
Thx 🙏🏻
super helpful!! thanks brother
Thx
Very good video, thank yo.
Thx 👊
Nice video bruv
Thx
Great job
Thx
CMK. Hello I have a question.
What is the make and type number of the scope mounting brackets?
Those are eagle vision mounts INS 34
Thanks.
Have you changed the transfer port to dual transfer port or is it the factory settings? Coz with reg @150 and hammer spring max out I still get 890 with jsb 18.13.
With the crown MKII you get the FX barrel that has two sides on the transferport. You just need to rotate it to the side you want to use 😉 in combination with that I use a Huma probe with larger opening
Hi,is it critical to have dial turned fully up(23) or fully down(1) settings before removing the wheel before making the adjustments with allen key or dies it matter?
Not really if you know what you are doing 😉 the most important is to see where the metal balls underneath have to sit en meet with the appropriate spot on the power wheel.
If you stick them with grease against the power wheel then you can’t go wrong . The explanation about putting it back at the same spot is for the rookies 😉
Hello mate. Pretty nice video. Love my FX Crown on Sinthetic stock. Even I bought for him a .177 500mm barrel. Had some issues: once I tried to disassemble the rifle and lost the springs on that wheel. Later when trying to re assemble put the screw on a wrong position and ruined the threads. My gunsmith fixed it. Later on when trying to adapt a picatinny rail by myself, shot the rifle when air tank pressure was lower than regulator pressure. Psssss, all air went out trough the barrel. Again ro the gunsmith. That specific point of needing to disassembling all the rifle to change hammerspring level is only one of two defects I see for this rifle. Other one is not having a magnet to fix magazine to the stock. We need to talk man. What barrel liner are you using to shoot those slugs? The standard slx light liner? Or the heavy one? Regarding adjustability, FX intention is good. This same rifle Can be used for hunting, for field target, for BenchRest at 25, 75 and 100m and more. But. I want to know his limits when using slugs. Congratulations for this video and the chanel. Cheers
Hi mate , yes there are a few things to keep in count when shooting pcp’s or you can end up by the gunsmith 😉 but I advise to watch many YT videos and you will be able to do those repairs by yourself very easily!
If you take care of them you will hardly have any problems with them .
Regarding my setup I am shooting at hammerspring #20 with the internal hammerspring near to max out and the regulator at 145bar this gives me about 960fps with 22gr slugs in the 700mm .
You can raise the regulator pressure up to 160bar but don’t go higher then that as it can damage stuff
What a Beautiful Rifle! I haven't even bought my first FX and now I want another one. Damn You FX!!! LOL
Really enjoy your content, very informative. Thank you. Couple of questions/thoughts; can the huma dual port fit on the Crown (MKII) barrel assembly? Could the internal bottle Regulator of the M3 be used to give this Rifle a dual Reg setup?
Hi thx for the support, I must warn you 😉 airguns are addictive 😂
The Huma dual port can be used on the crown barrel no problem .
The 2nd regulator isn’t a option though as it’s 100% build for the M3 and doesn’t fit the crown
Hi are you using pin probe for pellets too? What extra speed do you get with jsb18 and pin probe compared to pellet probe
No for pellets I am switching back to the Huma air high flow pellet probe , because the pin probe doesn’t seat the pellet deep enough.
Regards added fps , it depends on the tune you have on the crown
@@Airbuks ok, I thought the Mk2 would have a high flow probe from factory to suit the dual TP that's in the barrel
@@fiestamans it doesn’t 100% matches the size of the dual transferport as FX holds on to the one hole port for pellets, Huma has a probe to match the dual side
Watched five times and not clear even a little bit. So the internal adjustment screw …turning clockwise increases hammer tension ??
Thanks for the video! QUESTION: Have you experimented with the transfer port or do you leave it on MED? I have a walnut .22 MK2 with a 500 mm barrel. Reg was factory set to 110 and velocity is too low, I'm looking for around 888 fps with JSB 15.89 gr pellets. I'll make some adjustments tomorrow. Cheers!
I always leave it on high for maximum airflow .
If you want to up the power I would start by adjusting the internal hammerspring since you already have 110bar on your regulator. With the 500mm barrel you should get there with ease .
Do this in small steps , put your TP on high , powerwheel on 23 and adjust it 1/4 turns up until you get to the 880 fps
@@Airbuks Thanks for your quick reply and advice!
Como vou saber que válvula usa la mía. Si hay una de 8 mm y una de 10 mm?
English?
Mantap banget gan salam sukses selalu 🙏
Mantap bang👍👍👍
380mm barrel Looks good on a CROWN.
Yes it does and it has good power aswel
My friend, I'm from Brazil, I wrote on your channel, I want to know the measurements of this stock, I think it's top