This is great, I had purchased four of these 16mm rails and had them sitting around for a while and last year got the bearings. Now to make the other parts. The problem is room to put this thing. I think I might have to limit it to about 48". I had completely forgotten about the stops. Thanks for posting.
Hello. You have a new channel name now? Instead of Mokong TV? How can i possibly get or buy the router support for this Makita router? I have the same linear guide rails and its been my plan 2 years ago to make a flattening jig. Initially use a plexiglass but yours is more sturdy and dont flex. Can you help me get one too? Thanks!
you have made a brilliant video. !!!!. Superb !!! I now feel `enlightened` by your work here. Did you buy these rails and end stops from `Vevor` if not then who from. Do please advise. I must make what you have. So many applications ! Most kind thoughts Roger (Cabinet maker - UK)
If you put a removable stud through the base plate you could follow templates. Would be nice for flattening arias but leaving parts high or doing multiple cove cuts with a core box bit etc...
How to make: 1: Buy 4 runners. 😊 2: Hit “print” on your CNC sheet metal cutter. 😅 3: Finish in your industrial hydraulic bender. 😂 But seriously, the metal plate isn’t hard to make with hand tools, and could even be made from thick plywood.
@@str8chevys913 Hi, and many thanks In Amazon what is the diameter of the rings: 20mm or 25mm? The information is not provided. Many thank,s have a good day.
Great idea! Providing you decide to make more base plates for the router, I will buy one for me!
Thanks for sharing this idea. Today I build a base plate for my router.👍
This is great, I had purchased four of these 16mm rails and had them sitting around for a while and last year got the bearings. Now to make the other parts. The problem is room to put this thing. I think I might have to limit it to about 48". I had completely forgotten about the stops. Thanks for posting.
Hello. You have a new channel name now? Instead of Mokong TV? How can i possibly get or buy the router support for this Makita router? I have the same linear guide rails and its been my plan 2 years ago to make a flattening jig. Initially use a plexiglass but yours is more sturdy and dont flex. Can you help me get one too? Thanks!
thx for simplifying the setup. ill make my own now,
레이저 타공에 절곡까지… 엄청납니다! 제 경우는 합판에 두꺼운 아크릴판인데… 잘 보았습니다!
감사합니다.
you have made a brilliant video. !!!!. Superb !!! I now feel `enlightened` by your work here.
Did you buy these rails and end stops from `Vevor` if not then who from. Do please advise.
I must make what you have. So many applications !
Most kind thoughts
Roger (Cabinet maker - UK)
If you put a removable stud through the base plate you could follow templates. Would be nice for flattening arias but leaving parts high or doing multiple cove cuts with a core box bit etc...
Nice and short! Дзякуй за працу.
Fantastic video. So many idea's. :)
멋지네요. ㅉㅉㅉㅉ
Ich würde gerne eine fräse Platte kaufen und was würde die kosten... bitte um antwort 😊
could you make me the cnc plate from your video ? im in ny.
Phantastico
Добрый день! Скажите пожалуйста у вас есть черчен для фрезера Bosch?
Thank you for sharing!
Great Job...i had the same idea one size smaller...
Now add dust collection.
Nice work.
Hola,una pregunta,de que medidas y grosor son las plantillas,Gracias
Nice. What diameter rails? SBR16 or SBR20? 16mm or 20mm? Thanks. :-)
Hola, buen video , como se llaman esos rieles y donde puedo comprarlos , le agradeceria su ayuda gracias
루터 플레이트만 따로 판매가능한지요?
네 가능합니다. mockongtv@gmail.com으로 성함과 연락처 남겨주세요.
How thick is the metal plate?
Where can I buy the plate that attaches to the router?
안녕하세요
레일구입시 2개가 한세트 인가요 아니면 구입수량을 4개로 해야 되는지요 해외 발송 인데 몇칠정도나 받으셨는지 궁금합니다
2개 1세트이니 2세트 구매하시면 될 것 같습니다 시간은 상황에 따라 다를테니 제가 말씀드리기 어렵습니다 감사합니다
That's great, where could I buy the base plate for the router?
Sorry, I made only one plate for my router
How to make:
1: Buy 4 runners. 😊
2: Hit “print” on your CNC sheet metal cutter. 😅
3: Finish in your industrial hydraulic bender. 😂
But seriously, the metal plate isn’t hard to make with hand tools, and could even be made from thick plywood.
Do you have the cnc plans(file) used to cut the metal sheet?
안녕하세요.
철판 플레이트 비용등등 제작 문의좀 드리려고 합니다.
플레이트를 타공등등 똑같이 제작해서 마끼다 RP2300FCX를 구매 제작 해보려고 합니다.
루터 비트는 어떤 제품 인가요?
택배비 포함 9만원에 제작해 드리고 있습니다.
구입을 원하시면 아래 이메일로 성함과 연락처를 남겨주세요.
mockongtv@gmail.com
How do you adjust the height if you have timber thats thicker to flatten???
Use two 4x4 timber below the two bottom rails
구입할 수 있나요?
네 구입할 수 있습니다. mockongtv@gmail.com 으로 연락처 남겨주세요.
사장님
라우터 플레이트 구입하려고 합니다 구입경로즘 부탁드립니다
mockongtv@gmail.com으로 성함과 연락처 남겨주세요~ 감사합니다
Can you make me one of those?
Bom dia. Faltou a fazer o sistema que eleva tudo o conjunto, se a madeira for mais grossa.
Fancy tools used to create the sled make this difficult to replicate, but love the work. Is metal better than a see through base to monitor the work?
the guides are cheep from Amazon got mine for $35.00
Can you make me one of that sled bucket? 😂 I don't have a pressingmachine!
$50? pls sir😆
You stripped some of your screw holes
Could you please pass the drawing with the measurements of the base of the router?
I need one of those. Where can I get one.?
Router plate is not for sale, other links are in the description box
플레이트 제작의뢰 하고 싶은데 비용문의 드립니다.
mockongtv@gmail.com으로 성함과 연락처 남겨주시면 자세히 안내해드리겠습니다 감사합니다
So… you made a human manual control. You should just get the steppers and make it a cnc
라우터 플레이트 구매하고 싶은데요~ 메일보냈는데 연락이 없으셔서 글 남겨요~
Как сделать каретку для фрезера в домашних условиях.
Hi Thank,s for the video , but where to buy the end stop rings for the rail ? I'm loocking every where and hard to find, Many thank,s.
Christian it's in the Tool List above the comments.
it's called the Limit Fix Ring
Is that what your looking for.
@@str8chevys913 Hi, and many thanks
In Amazon what is the diameter of the rings: 20mm or 25mm? The information is not provided. Many thank,s have a good day.
@@christianmateo2621 I really don't know the diameter, but if you buy both sizes 20mm and 25mm the one that doesn't
work I think you can return it.
@@str8chevys913 Hallo , many thank,s the 20mm was orderd . Bye
Great video ! But you must be kidding me. But if I have a well-equiped workshop like yours, I wont need to build my own jig. I can buy one
สวดยอด