ฝัง
- เผยแพร่เมื่อ 30 เม.ย. 2015
- This is the first shoot of the Colt single action army. Licensed to Umarex does this gun live up to the legend which is the original SAA.
We'll find out in this video.
This gun was purchased from Pyramydair for around $120 April 2015.
Purchased mine recently from Cabela's for $99.99.
I've found it shoots .177 pellets as good as BB's...if not better!!
All in all, a well made, quality revolver...with huge fun factor!!!!
I wondered about that, if it would shoot .177 caliber pellets. Have you had any negative issues shooting the pellets?
could you tell me the fps the gun fires? thanks!
I couldn't resist getting both the blued and the nickle versions. Very satisfied with them.
The spring loaded fake fireing pin is a buffer to reduce stress on the frame and especially the hammer as the hammer drops and contacts the frame the spring loaded fireing pin works to buffer the impact reducing stress on the frame and especially the Hammer which with out a cutter could break into 2 pieces.
If you check the muzzle on the outer barrel as well as the chamber you will notice they are closer to .41 rather then .45 the cartridge are closer to .41
actually its like that so the co2 doesnt escape the gun the hammer functions as a normal hammer if it was making contact all the co2 would just be sent out of the gun
"There's nothing like the feeling of slamming a long silver bullet, down a well-greased barrel during a fight"
You're pretty good!
WOW ,what a beautiful gun,a b.b gun?wish they had these when I was a kid.detail is just fabulous!
Dan Wesson revolver shells fit and function too, though you get slightly lower muzzle velocity due to the BB being sited at the front of the shell.
the metal in the grip is the wrench for the co2 ;)
I was having trouble turning the cylinder when it was "half cocked" and I thought it was broken. Well the first part of your video was/is very helpful as it showed that you only have to gently pull it to the FIRST click and not the second which is what I was doing but not all the time. Now I know what I did wrong. Yes, I did read the manual but didn't realize it would click 3 times. Great looking black finish with kind of a bluing to it.
Great review
The reason the dummy rounds are 357 caliber is because these are already available for other BB guns I think, so they didn't want to design new ones and some people already have some of these.
The umarex peacemaker Actually has 4 stages (4 clicks) but one of the safty features Umarex incorporsted was when hammer is down it sits on first stage rather then on co2 release valve.
If or press your trigger slowly move hammer forward till you feel it touch your co2 release valve hold hammer there release the trigger.
Cock the hammer count the clicks 1 2 3 4
Like the Real Colt SAA powder burner...click 1 the Safety stage sets trigger gun can not fire.
Click 2 the Half Cock position, this releases the cylender locking bar allowing the cylender to rotate by hand enabling load and unload.
Click 3 is the cylinder locking bar resetting itself.
Click 4 cylinder sound of trigger setting itself in fire possition and cylinder locking in fire possition simultaneously
The Umarex Colt SAA all have the 4 stage but with the Umarex it is designed thst the hammer sits at stage 1 ( click 1) the safety stsge to protect the co2 release valve.
Also Note the 4 clicks is Not to spell out C O L T if it was then explain why the 1875 Remington and other single action revolvers from 1873 forward have 4 clicks.
Also Note the Original Colt SAA was carried with 6 rounds safely. As was the practice with Colt precussion cap revolvers they lowered the hammer between caps preventing accidental discharge.
The hammer if the 1873 Colt SAA was lowered so fireing pin rested between cartridges preventing accidental discharge this info from Colt also from my great grand fathers diary also personal experiance with my Original Powder Burners 1849 Colt 1851 Colt 1862 Colt 1873 Colt 1858 Remington 1875 Remington and msny more in my collection.
I just bought one. It’s one of the best things I’ve ever owned. If you’re thinking of buying one do it.
Thanks mate for a very good review. Have you tested how many shots a co2 is averaging ? Cheers
I would like to know this as well
You noticed the metal piece on the inside handle is the key for tightening the co2 powerlet right
Just purchased mine from Walmart for about 85 bucks, I subscribed ❤️
85 bucks?!?? I cant find anything less then 200
that two tone bluing finish is actualy very accurate with an actual colt - its supposed to be like that
The manual is saying to occasionally clean the metal parts on the outside with some gun oil. What is your suggestion i really want to know.
I ve seen an Umarex Cleaning kit and the RWS Rifle Shooter's Kit, .177 Caliber which is more suitable?
The first has no oils included but the second does.
I am really confused here
Just ordered mine (nickel since they discontinued the blued version). I feel like the safety is the kind you're not really supposed to use, like a mosin-nagant safety. Does yours have the early round style ejector head, or the later crescent style?
very nice review, probably the best on youtube.
Super nice video! I'm thinking about ordering this, but I'm not sure. But it seems like a beautiful gun
holy crap that group is really good
I always wanted one of those!! 😍😍😍😍
The CO2 cartridge tightening system comes with one on the handle that you take off to load the CO2
Complimenti per il video. Scusa l'ignoranza ma cos'è quel tubetto che metti nella bomboletta di co2?
My opening gate is slightly loose I mean it’s not stable at all when I open it to refill the ammo. I hope that’s not a deal and that is normal. I mean I can move it a little bit left when it’s open but it comes back it’s in regular position
at first the hammer staying back bothered me, but after I got my Duke, nickel, pellet, I like it so much, I ordered another. nice gun. the hammer don't bother me so much now. I don't mess with the safety.
can't wait to get mine...just ordered it...but why the gloves?
Sorry you never got your answer rip.. I'll answer it, he was doing something called fanning the hammer for fun like outlaws do in movies. The quick hand slapping on the hammer. If you dont have protection itll cut your hand open
So it can look more professional but those are gardening gloves lol
@@virtuous7466 no they're not. They're actually half decent mechanic gloves.
Cause it’s shiny and he doesn’t wanna get his greasy mitts all over the shiny thing
for extra grip most likely and to look badass
how come you done use the Allen wrench that's on the removable grip??
Last night,I didn't even know they have Western bb pistol guns. That was a great video! Can you do the John Wayne version of those,please? That be great for Christmas as well.
Nice review
Do you have to use the co2 or can u just use it in single action?
when you loaded the co2 and heard no noise, you said no leaks. every c02 gun I have makes a slight PSSST when it first pierces. is this not normal ? once its tight i hear no noise and it shoots fine but never had one where it was totally silent when tightening up the c02 cartridge.
The metal in the grip is to tighten the co2
I picked up mine today , Its nice looking , I have the nickel one with Ivory grips.But the finish is not that perfect , it has slighty some blemishes in the paint and the edges on the cilinder are really not that good It looks like it has little dents on the edges of the gaps on the cilinder....is that normal ? greetings
How powerful is it, fps? How many shots can you get out of one Co2 powerlit?
Wow that's a nice gun, i have the 357, but this looks Cool too!
Did you shoot steel BBs?
+hobbyjon would the .357 Magnum bullets fit in this BB gun?
its better to buy a pellet version of this revolver or bb?
thanks for the video i also wish the hammer would sit flush but it aint no biggie i'll still be getting one soon :)
the shell can load pellet also right?
How many shots cam you get per CO2 cartridge?
FYI he’s wearing gloves so he can fan the hammer without splitting his palm open
Would this be good for skirmishing?
Can you make a video to show how Colt® Peacemaker (0.177 pellet) revolver's inside barrel looks like?
You mentioned you read the manual - didn't it say anything about the fact that the metal part inside the removable plastic handle holds a hex wrench? :o)
+Vinterfrid 4:32 He used proper English.
+westxtsew And what is that supposed to mean?
+Vinterfrid He's said it on just about all the comments that point out the hex wrench in the grip.
i.e. the one that's arguably more convenient than getting a standard one out of the tool box, as it's guaranteed to be the correct size.
I think use other tool is better, you could damage that grip, you know how those things are fragile.
Were your hands cold?
Is something stopping me from sticking pellets in the revolver cartridge?
How long did it take to get to your house?
cool video, nice revolver
I have one and I think it is great
Good, honest review. Phil :-)
hey where did you get it from
The gap with the hammer bugged me too but after seeing this video could it be so the hammer doesn’t touch the bb in the dummy cartridge like if it were touching you’d have to do a cowboy load with five cartridges instead of six so you don’t get an accidental misfire. But the cartridges aren’t actually live so maybe it’s just so it doesn’t push the bb out prematurely 🤷🏻♂️
It's to stop the hammer breaking and being on the release seal permanently
Damn that barrel is different. Maybe they made em like that years ago.
We're do they sell the mettalic version
Could somebody tell me the purpose of the oil that he put on the CO2?
i think the difference in finish is an accident but its weird because alot of the real ones have a kind of blued frame or a different finish on it so it might be on purpose
when you buy the gun, is it delivered with a co2 cartridge or do you have to buy some separately?
Buy separately
Anywhere to get them in the uk? Would make an awesome prop.
I like yourI video you need to do more of them
How loud is it?
how far does it shoot
Should I get black or silver?
Is this a type of Revolver?
Can you quick draw and rapid fire this gun?
This is a perfect toy for practicing gun spins.
True, i have seen 2 japanese proffesional revolver spinner in youtube using this same revolver and same brand too.
so can ya fan fire it?
Im looking for pellet model with 5 inch barrel blued.
YOU~ROCK!!
No the firing pin is not just for show its there so it can shoot the bb and co2 which causes pressure and it shoots the round duhh
What’s with the gloves? Do you have a deformed hand or was it just a cold day?
3:23 it looks like it may be possible to fix this tiny little detail. It looks like some sort of spring issue pushing it away to this position. Damn mine peacemaker will arrive tomorrow, this replica would be ideal if only this 3 stage click mechanism...
You ever fix it?
What is the weight?
The finish is called blued finish.
Is it reliable
I think you like this gun, fella
"Alex C. From TFB TV here" you sound just like him.
How much does it is?
Do you have another channel where you review chips?
th-cam.com/users/Hobbyphilic
In regard to the difference in color between the frame and the barrel, I don't know whether this was deliberate but it looks like a faint version of what real blued Colt SAA's look like when they're new/pristine enough:
www.hallowellco.com/Colt-SAA-357-2nd-right.jpg
Except for the nickel-plated SAAs, generally the main part of the frame is color-case-hardened like this while the other parts are blued. So even if the differential coloration wasn't deliberate on the part of Umarex, it's not as though this were generally wrong for the SAA (especially if the barrel has a darker tone while the frame has a lighter, warmer tone).
is there more of the "dummy rounds" to buy, so you can have more them 6 shots ready?
+Lion de Oliveira (Lion 4K) yes, looks like about 8.00 - 9.00 plus tax depending where you look.. you can get them for pellets or bbs. cheers.
+Chris c Nice. I can just hear Ocelot saying: "Reloading like this... is a revolution" "I've never felt a tension like this before..." "This reload time is exhilarating!"
Nice Gun. Where did you buy that Gun? and How much it cost?
description
on the grip has the allen key
+The Downtrodden 4:32 He used proper English.
joule?
what's up with the gloves ? If you had actually read the owner's manual, you would know the hex wrench is part of the handle & the warning against hard background shots. I don't know anyone who shoots inside their garage, but doubt it clears the 300YD danger distance
Can you measure the diameter of the shell? mine is pretty lose when I insert it into cylinder?
I wonder if the shell's ending lines up with barrel hole?
Can't speak for the BB shells, but the pellet shells are .404" just in front of the rim, and .384" just behind the "bullet".
While I've got the calipers out (and I know you didn't ask, but I'll give it anyway), the overall length of the cartridge is 1.610".
Interesting thing to note, is that the cylinder is narrower (.330") at the front, presumably to prevent a powder cartridge from being fired, although, given there's no route through the breach block, for the "firing pin", I can't really see how you could fire a powder cartridge in it.
Additional. Yes, the shell's ending does line up with barrel hole (aka the forcing cone), courtesy of the narrower front end of the cylinder.
Thats a relly nice gun
Maybe the spring loaded firing fake pin is to keep the pistol from accidentally being used with a real 357 round.
Where did you buy the gun at and how much did it cost cause I want one
Justin Bowman PyrimydAir. They run about $120.
Nice 👍
That gun looks like it from a movie called the boondock saints 2
Can you fit airsoft bbs in the shells?
no you cant
Year AD. 2024
How much are they now?
It's too bad the peacemaker isn't produced as an airsoft gun for nearly the same price. Besides the tanaka model (because it is definitely expensive) a company should consider manufacturing these for a 6mm plastic bb.
Should I get the bb or pellet version
The online PDF version of the manual has you placing the revolver on safe first then placing the hammer in half cocked position in order to rotate the cylinder/load the shells. However neither the cylinder nor the hammer will move after it has been placed on safe. only way it will move at the half cocked position is if the safety is off! Could I have possibly misunderstood.missed something in the instructions? I am pretty sure I followed them to the letter. Hopefully its not the pistol that's defective. Any words of wisdom from anyone that has had the same issue? I bought it at a pawn shop recently for a little over $70 after taxes. I guess you get what you pay for. Did some research and they normally run just over $120 new/retail. At least my model/style does anyway. It has the blueing with ivory/plastic handles. Came with 6 shells. No retail box/cleaning gear. Aside from this issue. It looks like new/ no blemishes!
Just don't use the safety.
I want to buy but how in india
Its high noon somewhere in the world
What is the oil used for?
Isolation