I finished what I wanted to build with this. I didn't use the optocoupler isolation board due to size constraints, and had flickering inputs. To get around this, each input pin that I used had a 750k ohm resistor to ground to get it to work. Once again, thanks for the explanation @@OnosTech
Greetings from Ukraine. Very interesting project! I had a problem with the com port driver for Windows 7. I solved it using the zadig -2.8 program, selecting the USB Serial (CDC) driver
Very interesting RPI PICO PLC. Next to use the WiFi and Bluetooth options. 😎 Thank you and best regards. I wish the Orange Pi5 had these great GPIO PWM examples. 🥳
Thanks! Display with PLCs like this is mainly possible with Modbus HMI. You can modify these FLProg ones for Outseal PLC to work with the Raspberry Pi Pico PLC. th-cam.com/video/g0OqOib9Lag/w-d-xo.html th-cam.com/video/zazJyEX599Y/w-d-xo.html th-cam.com/video/YmOSvV9BHfQ/w-d-xo.html or use the OP320 HMI th-cam.com/video/iC2vYqDj54s/w-d-xo.html
PLCs are basically industrial controllers that can easily be maintained (control logic & hardware) by technicians. You can get more detailed answers from Google search.
hi my friend i tested this fimware but there is a problem in comparisons command when the condition achieved the output to any (y )does not work. please make a video for this to learn
I use a serial to rs485 converter. Conv. Tx --- rx pico Conv. Rx--- tx pico In Gx Works i use D8121 address. H4081 move to D8121. 9600 8 None 1 In modbus poll show time error. But i test another Outseal Porgramme it response ok.
found this one year later, got it up and going in 5 minutes, thanks for making the video
Glad it helped!
I finished what I wanted to build with this. I didn't use the optocoupler isolation board due to size constraints, and had flickering inputs. To get around this, each input pin that I used had a 750k ohm resistor to ground to get it to work. Once again, thanks for the explanation
@@OnosTech
@boxcarhobo8315 My pleasure
In your connection diagram V1 must also be connected to V2 on the opto isolator board for the circuit to function.
amazing Video and I've watched others and i'm very impressed with your content newly subscribed keep up the good work.
Many thanks, will do!
Thank you for coming straight to the point, and telling me all that I needed to know. A perfect video.
I am glad it is helpful
Fantastic! Learned PLC programming in 1985 on one of the first Melsec devices :-)
Wooooow! 😲😲😲 Awesome!
Greetings from Ukraine. Very interesting project! I had a problem with the com port driver for Windows 7. I solved it using the zadig -2.8 program, selecting the USB Serial (CDC) driver
Great information! Thanks for sharing.
Very interesting RPI PICO PLC. Next to use the WiFi and Bluetooth options. 😎 Thank you and best regards.
I wish the Orange Pi5 had these great GPIO PWM examples. 🥳
Very cool, thanks for the video, been using FX3U and I like GXworks2
Many thanks
Do you know if RPI Pico setup with this FW has all the instruction sets of FX1N typical Mitsibishi clone PLC??
Wow thats great, thank you very much for share, keep doing a nice job with your channel (We are learning so much).
Best Regards!!!! :)
Thanks 😊😊😊
Congratulations!!
👏👏👏
Thanks
Very good video.Many thanks for you review.
Thank you for the firmware.
Awesome 👍
Thanks
It would be interesting to port this firmware to the rp2040 zero boards since the output pins used are not available on this board
The outputs are available on the underside of the board except for GPO16 that is used for RGB LED
Great tutorial, next display with menu structure?
Thanks! Display with PLCs like this is mainly possible with Modbus HMI. You can modify these FLProg ones for Outseal PLC to work with the Raspberry Pi Pico PLC.
th-cam.com/video/g0OqOib9Lag/w-d-xo.html
th-cam.com/video/zazJyEX599Y/w-d-xo.html
th-cam.com/video/YmOSvV9BHfQ/w-d-xo.html
or use the OP320 HMI th-cam.com/video/iC2vYqDj54s/w-d-xo.html
Can use RS485 directly? 2:01
superb sir !
Thanks a ton
Thanks Ur greate work.
You are welcome
Nice
Thanks
Great Video Do you know how to get the Modbus working I can get it set as a Master and write coils but cant read registers or holding registers
Very cool, why should one use plc in general for waht purpose?
PLCs are basically industrial controllers that can easily be maintained (control logic & hardware) by technicians. You can get more detailed answers from Google search.
hi my friend i tested this fimware but there is a problem in comparisons command when the condition achieved the output to any (y )does not work. please make a video for this to learn
Please make an example with analog i/o
This awesome guy surprise me every week ❤
Can i use pico W wireless version?
I am glad you like it. Pico W should also work.
2:49 Can I supply 3.3V from Pi to the input pin without connecting 10K resistor to GND? I tested ok, does it affect anything?
OK
How can i use analoge pins , how can i use d1000 and d1001
See this video: th-cam.com/video/dWlJYwY4V4M/w-d-xo.html
can i use pico with Delta Hmi.
You can with Modbus
I use a serial to rs485 converter.
Conv. Tx --- rx pico
Conv. Rx--- tx pico
In Gx Works i use D8121 address. H4081 move to D8121.
9600
8
None
1
In modbus poll show time error.
But i test another Outseal Porgramme it response ok.
modbus program video please
sir ... How to download GX works 2, I Want to try
See the link in the description.
How to convert Arduino nano to PLC mitsubitsi ?
🙂🙂🙂