@Jacob Gonzales LMAO most of the comments I dumped on siren videos are close to half a decade old With the exception of a few like this lmao Been more engaged with cars recently
@@exofriend4895 I am now a full time aircraft mechanic working 55+ hours a week plus other stuff going on in my life. I don't have much time to watch TH-cam and even less to go back and reply to every comment I get. For example, It took me 5 days to see yours. Its not a matter of being nice or not I just simply do not have the time right now.
It is 3d printed. Its a 2t22 so it dose not have the dampers. Although I have acquired two small solenoids so I may try to make it into a 3t22 with dampers at some point.
I wonder where did you get these cones and the flat cone the one on top and also the two chopper motors where did you get all that from? I wished they can make a real mini plastic sirens like this one instead I did with paper. Where did you get all plastic siren peaces?
I designed it in fusion 360 (3d modeling software) and then printed out the plastic parts on my 3d printer. As for the motor it is a dual shafted motor that I got from amazon.
@@ExmarkDude ok well u could also use a tiny electric moter for the dampers it would be simpler but u might have to gear it down so it doesnt burn the moter edit: not gearing it down might make the moter not have enough torgue to turn the dampers witch would burn it out if u gear a small moter down it will have more then enough torgue but will be slower to move so dont gear it down too much that is if u use an elctric moter to move the dampers instead of solenoids
@@adamssirenadventures6574 Unfortunately same story for thunderbolt project I got the chopper part done and then kinda stalled on it. I do have a few videos on it though! I'm away from home for school right now so I don't have the free time anymore.
I designed it in fusion 360 (3d modeling software) and then printed out the plastic parts on my 3d printer. The motor speed controller was bought off amazon for $10.
I like how it actually has working rotors and doesnt use speakers to produce the sound, it really is a mini version!
Only 12 years old autistic kids does the speakers mini sirens haha
@@sprintertrueno1985 I would count mine as an exception.
Your Mini 2T22 sounds awesome! A beautiful siren with beautiful shaped horns!
How did I miss this video? A fully functional scale model 2T22?
@Jacob Gonzales LMAO most of the comments I dumped on siren videos are close to half a decade old
With the exception of a few like this lmao
Been more engaged with cars recently
Sounds exactly like it! Great job!
That’s awesome! Love the progress! I would love to make my own! You inspire me dude!
Amazing! Very good model you made there.
Sounds like the old 2t22 on a neighboring town's fire station. Pretty sure the last time it went off was for a major recycling plant fire.
That sounds really nice! Wow!
Sounded pretty close to the one in my town, the winddown is so slow and you can hear it across town even at 100-200rpm
Do you know how big I could print the rotor before it explodes or something at 3450? Also what I fill and wall settings did you use?
That is an awesome and authentic looking and sounding model! Great job!! 👍
Thank you very much!
@@ExmarkDude Reply to other people please. Many people loves your 2t22, but you don't reply anything to them. Be nice.
@@exofriend4895 I am now a full time aircraft mechanic working 55+ hours a week plus other stuff going on in my life. I don't have much time to watch TH-cam and even less to go back and reply to every comment I get. For example, It took me 5 days to see yours. Its not a matter of being nice or not I just simply do not have the time right now.
@@exofriend4895 stop being so demanding, man. this guy have more important things happening in his life.
@@exofriend4895someone is mad they get no attention 😂
It sounds just like a 2t22
This is a 2t22 ;¬;
You mean sounds like the real 2T22
Wow that's pretty impressive. Liked and subbed, keep up the good work
Wow, this is awesome. It sounds exactly like the the original siren too
I'm impressed!! Keep up the good work!
That looks pretty cool! Kinda reminds me of the mini Thunderbolt
Can you sell this?
Sounds pretty spot on!!!
Amazing, ya did a great job, it sounds just like the real thing, tho to me it kinda sounds like an XT22, i love it tho
what is an XT22? is it like a 3T22 or something?
@@toybartley3528 It's a mix in between a 2t22 and 3t22
@@coltconnorproductions1016 like a 3T22 and one extra chopper in the middle?
its the only ay i can see the mix going
@@toybartley3528 No, it's where the sound sounds like a 2t22 and 3t22
The RPM of the real thing is 3400 RPM
Sounds great
Pretty cool dude keep on going
Sounds just like a 2t22! Good job!
Cool! And pretty accurate.
Ur 3t22
Looks amazing!
sound like "big" 3T22
It pretty much sounds like it's bigger counterpart
Wind down sounds like an ACA Hurricane. Other than that, pretty nice!
Wow! Very impressive!
It sounds real! Not sure why 180 people liked the video and I see no comments but, overall, great video!
I had the comments hidden on accident, just fixed that lol.
This is very impressive! Good job!
Wow it looks really good
Sounds so real I like it
That's awesome! Could you try to build a mini Loudon Comms ES-2000 electronic siren? Im a fan of that model. Lots of em.
My friend was thinking about making an electronic mini siren soon. I dont know if I ever will though.
Umm....2:53 to start it :)
Nice!!
Can you send me the link to the site where you made the 3D printed mermaid?
Siren?*
The translator is very bad than the real translator
Epic!
Nice siren
That sounds realistic
Holy wow!
Good job
Quite impressive
I'm going to 3d print a hand-cranked air-raid siren
That is sooo cool! Will you release the CAD files so I can make one?
So far I have been focused on school work, but at some point I may come back to this and make it into a purchasable kit.
Schoolwork? How old are you?
@@someboi7308I'm 23, just finished getting my associates of science degree in aviation maintenance earlier this year.
@@ExmarkDude o ok
Sounds cool first
Sound like the real 2T22 or 3T22 👍
That’s great! Is it 3D printed? Also that seems to be the exact same RPM/pitch as a real 3T22. Does it have working dampers?
It is 3d printed. Its a 2t22 so it dose not have the dampers. Although I have acquired two small solenoids so I may try to make it into a 3t22 with dampers at some point.
ExmarkDude epic. I must have misread the title as mini 3T22
@@ExmarkDude There is a ''❤'' button
That's cool.
I wonder where did you get these cones and the flat cone the one on top and also the two chopper motors where did you get all that from? I wished they can make a real mini plastic sirens like this one instead I did with paper. Where did you get all plastic siren peaces?
I designed it in fusion 360 (3d modeling software) and then printed out the plastic parts on my 3d printer. As for the motor it is a dual shafted motor that I got from amazon.
Finally the first mini 2t22
Not the first but its the first one thats not a fake cheap paper build with an iphone inside it
I meant like a functional one
That is very impressive! can you make a mini STH10?
Im sure I could out of the top part of this siren. Just dont have the free time anymore.
That's pretty cool!!! how did you make it? 3d printing?
Yes, I designed it in fusion 360 (3d modeling software) and then printed out the plastic parts on my 3d printer.
Good job mater fact i need to make one
Thats sweet!
[Music]
[Applause]
Nice build, will you get a proper controller for it?
I bought the motor speed controller off amazon for $10.
pretty cool
can you try making it into a 3t22 by puttinbg on dampers and solenoids?
I was thinking of trying that at some point. Don't know when though.
@@ExmarkDude ok well u could also use a tiny electric moter for the dampers it would be simpler but u might have to gear it down so it doesnt burn the moter
edit: not gearing it down might make the moter not have enough torgue to turn the dampers witch would burn it out if u gear a small moter down it will have more then enough torgue but will be slower to move so dont gear it down too much that is if u use an elctric moter to move the dampers instead of solenoids
wow! got any plans to publish the .STL files once this is done?
Can you make a 2001 with a 3D print? It's the white kind.
Thought about doing that at some point. I unfortunately don't know when that would be.
ExmarkDude Ok also thunderbolt siren.
@@adamssirenadventures6574 Unfortunately same story for thunderbolt project I got the chopper part done and then kinda stalled on it. I do have a few videos on it though! I'm away from home for school right now so I don't have the free time anymore.
ExmarkDude Ok I understand.
That’s cute
try and make it into a 3T22 by adding dampers u could use magnets to move it wont be as strong but it should make functional dampers
The solenoids he bought were too large for the scale, plus he wanted to keep it as a 2t22 for simplicity.
You should mount it on a poll
Nice
Nice
0 Like and 35 likes good video I never seen a video this good
Broken solar panel needs this
Is it 3d printed?
Yes. Hi! I'm Federal Signal Thunderbolt 1003A Tornado Siren.
Could u do a tutorial of a homade siren like this
Sounds like a real ones
Sounds just like it
Is there a way i could have the OBJ or STL files to those?
Sound very alike to the real one
Would you make one of these to sell?
Is this the 3d printed version of the siren?
Yes, the only part the is not 3d printed is the motor.
@@ExmarkDude can the model of the siren be found on a website?
At 0:00 it looks like the bottom has 12 horns.
Love your mini siren. How did you make it? How did you make the speed control thing. This looks like a real 3T22
I designed it in fusion 360 (3d modeling software) and then printed out the plastic parts on my 3d printer. The motor speed controller was bought off amazon for $10.
@@ExmarkDude cool
What's that dual axle motor you used for the mini 2T22? Is it still available?
I got it off of Amazon. If I remember right it was this one. www.amazon.com/dp/B07WMQ3C4B/ref=cm_sw_r_cp_apa_i_muBKFbSBJS8A3?_encoding=UTF8&psc=1
@@ExmarkDude Oh ok.
Coool
Cool
O_o that sound so loud !
I already test the motor to 27 vdc use a vfd start and hole thing explode at 9087 rpm
Looks like the crystal MN 3T22
Sounds like a 3T22B.
How do you make that I want one
Is this siren for sale or did you make it
I still hear a same sound
2:53 when it starts
Make a mini sentry siren to go with it.
I might be small, but I am actually very strong
Could i buy it off of you? Maybe $300? $350?
Name any price and I'll go with it.
Nothing over $400 though.
I'm flattered by the offers but ill be keeping for now. Might make it into a kit at some point. I just do not have the time right now with school.
Do not using the headphone!
Man. We need the stl files. Please !
that’s a long wind down.
Wow
Can you send me the files for this?
mini sirene
Go to 2:53 for it to ttteeesssttt
Nicr
is this 3d printed
Yes
@@ExmarkDude yay. when i get my own 3d printer i can get a cheap 2t22