You're a absolute life saver! Came back after only 24 hours away and our boiler had depressurised. Thanks to you I don't need to faff about getting a professional (unless it does it again!)
Thank you for this, I was preparing to call my landlord and have to sit in the cold until a workman turned up...you saved my arthritic joints and dirty hair 😁
@@kitaro5618 It was the system pressure if memory serves. The radiators were barely heating. Lived in the place for 5 years and never bled. After bleeding them I got the error message and the video helped me re-pressurise the system.
Thanks James. I have an E10 code and a low pressure I've found the loop but I can not attach the loop to the heating. Water comes out of the cold. Can you help me. I have no hot water.
you are a bloody hero! This is getting a like! Can i ask though why would ii need to open those valves? is it something i need to do every so often to keep the pressure up or would there be a reason why it is dropping below the required pressure?
Mines is the same boiler and coming up a code 73. Basically getting a hot shower for 30 second's then cold for 30 second's. When it gets to 79 temp on the display it cuts off and displays code 73 then temp number displays and but going backwards then you hear it kick in again to heat up. So what's up with it ? Is it an easy fix for an expert ?
Thank you, just got my hot water back after return from a holiday into a cold home 🙏
Thank you for making this so simple to follow. Got the pressure fixed within a minute 👍
You're a absolute life saver! Came back after only 24 hours away and our boiler had depressurised. Thanks to you I don't need to faff about getting a professional (unless it does it again!)
Absolute legend. Nice and easy to follow, thanks!
It's the 2nd time in 2 years I used your video to resuscitate my boiler! I salute you! 😁
Not all hero’s wear capes. Thank you for the advice, mate 👍🏾
Thank you for this, I was preparing to call my landlord and have to sit in the cold until a workman turned up...you saved my arthritic joints and dirty hair 😁
My boiler had a slightly different pipe set up with only 1 valve, but still a big help. Cheers!
Thanks James you just helped me fix my boiler on a cold December day your a star happy New year
Glad to help!!
THANK YOU so much. Thanks to you I've had my Sunday morning shower! So grateful thank you,
This is the only video that's actually helped me thank you so much
Bless your heart... i was freaking out... this works!
Glad it helped!
Bled my radiators for the first time and got this error. Thank you so much for your help!
So,Did the press come back mean radiator still have some air inside and not hot?
@@kitaro5618 It was the system pressure if memory serves. The radiators were barely heating. Lived in the place for 5 years and never bled. After bleeding them I got the error message and the video helped me re-pressurise the system.
Thank you, I’m on my own and your instructions were perfect.. 🎉
Top man , worked a treat , I don’t smell anymore 👍👍
Happy days!.... Get it ;) Glad we could help mate
I did that, and it worked perfectly..thank you so much mate
It worked for me! Super grateful I was bloody freezing in my flat 🥶
No problem 👍
Glad we could help!
Thank you for this video, you've saved me on a cold day!
Hurray, so happy this worked. Thank you!!!
No problem Sara glad we could help!
A huge Thank you 🙏🏽 . Your instructions were super clear even I could follow. All boiler/ plumbing / DIY scare me. Keep the videos Happy 2022
You are a life-saver. Thank you!
Cheers man sitting freezing until I found this video
Thank you so much, really helped us out!
Glad it helped!
Worked perfectly, thanks!
You just saved my life sir, thank you!
Thank you. Can you explain why the water pressure might drop to start with? I was worried there might be a leak somewhere...
Mate you’re a life saver thank you so much!
Nice job my brother..its helps a lot..
This worked a treat. Nice one!
Wow! Thank you, I fixed the problem with your help :))
This just helped me now. Thanks alot 🙏
Life saver! Thank you
So easy when you know how. Thanks a lot!
Thanks a lot , it was a great help .. cheers
Thanks for this lad big help
Much obliged, saved me £100
No problem, where shall we send our invoice? Just kidding, glad we could help out Steve!
Thank you, saved me money again.
Thanks James. I have an E10 code and a low pressure I've found the loop but I can not attach the loop to the heating. Water comes out of the cold. Can you help me. I have no hot water.
You’re a legend thank you sir
Thanks mate you saved us !
No problem 👍 Glad we could help Pierre
Thank you! Heating back on 😀.
Thanks James, much appreciated
Very welcome Wes
Omg, thank you ☺️ You save me 🙏🏼
Glad we could help Onur!
Thank you, just saved me from phoning my boyfriend panicking. 🤣
Thank you so much it's working
Thanks a lot! it worked!
Hi, the pipe where you increased the pressure from. I have but it has no taps on it? How can I increase the pressure?
Amazing vid thank you
Thank you so much this really helped
Every morning mine does this, checked for leaks around the house and don’t have one why do you think this might be? Thanks!
Legend! Thank you
Hi James, I've got an Alpha Intec 35c but I don't have an obvious filling loop to repressurise, can you offer any help/ideas please?
you are a bloody hero! This is getting a like! Can i ask though why would ii need to open those valves? is it something i need to do every so often to keep the pressure up or would there be a reason why it is dropping below the required pressure?
Lifesaver!!!
Thank you, very helpful
Glad it was helpful Jim!
Mines is the same boiler and coming up a code 73. Basically getting a hot shower for 30 second's then cold for 30 second's. When it gets to 79 temp on the display it cuts off and displays code 73 then temp number displays and but going backwards then you hear it kick in again to heat up. So what's up with it ? Is it an easy fix for an expert ?
Thank you! It helped us
Thankyou sorted it 💪
No problem 👍
Thank you so much
Thank you i have heat again 👍
I've done the pressure but is no heating now...what can I do?
I tried this. Sadly mine is still saying error with the pressure
What if I turn the 1st one 1/4 way and it spits out a little bit of water? Is that normal? :)
It shouldn't do that, there is maybe a loose connection on there that could do with a nip up.
Hi, I top up the pressure and the e10 error still flash. I press the RESET button but...still nothing... :(
Mine is doing this now, did you get yours sorted?
This was useful but it didn’t work for me unfortunately the sound I heard in your video unfortunately didn’t happen when I did it