If you find the video useful and would like to tip you can buy me some electricity for all these image generations. It is greatly appreciated! ko-fi.com/kleebztech
You're welcome! I still don't fully know but I at least now have a little bit of an understanding myself. Hard to do extensive testing and having to adjust it constantly. But I really think it's something that you need to experiment with to get a feel for what does what.
My thoughts exactly. It's just a smoke without fire claim to say that FreeU makes your generations always better. It's very subjective. I've found it most useful to fix a finger or two or pose in an image without having to inpaint, when you wiggle around with FreeU settings.
freeU basically plays with VAE layers of model, in sd1.5 to sdxl there are 4 VAE channels it basically plays with the weights of those channels and there is no telling which channel is better or contains what its mostly used to correct color. also SD3 will have 16 VAE channels..
Did it have any effect on accuracy like the Viking ship with FreeU enabled was better than without because it fixed the mast placement or maybe better fingers ? Thanks for the setting guide hope we see SD3 come out this month.
For some images yes. But I haven't run enough images to really determine much about that.. It could just be that it places them differently and not necessarily better because of certain settings. If I figure a way of automating it then I might have better chances of testing. Just a real pain to run tons of images this way. I might be able to do that in something else though.
Hi! Thank you for sharing with us this Fooocus tutorials. I really appreciate. I have a question. Is it possible to increase the number of the steps in Fooocus? For example: Quality goes to 60 steps, can I make the quality goes to 100 steps?
Muy buen video, como siempre , aportas gran cantidad de información muy valiosa. Tengo una duda , haber si me puedes ayudar , que tiempo te tarda a ti en generar 1 o varias imagenes con SDXL en fooocus o otras herramientas con tu rtx 3070? , yo tengo actualmente un rayzen 7 1300X con una GTX 1070 y no se si valdría la pena instalar fooocus en local o mejor generar las imagenes en google colab. Espero tu respuesta , muchas gracias por el video. Un saludo
Some of it is just I like to create stuff. I also like to learn. So I figure as I learn I might as well share what I learn. But I have gotten some shirts done and prints made up for the wall. And some is work-related.
@@KLEEBZTECHI also have some future projects, such as content creation through AI-generated videos. However, the text-to-video capability is not quite capable enough yet.
This video should get you in the right direction. You'll just download that checkpoint and put it into the folder. th-cam.com/video/GgEEb2K0j7s/w-d-xo.html
thanks a lot for this can you make a tutorial on how to take piece of cloth and by doing image prompt on this we can dressed it to any person/model i request you to do this & keep going 💪
I would love to do something like that but I don't know of any real way of doing that with the image prompt reliably. Simple clothing you might get away with it for the most part but not for anything more complex. I'll play around with it some more and see if I can find anything to make it more reliable.
Most people are still using the default. Plus I find just because it's a larger number doesn't necessarily mean it's better. Often these are trained a little bit differently. And when people get used to a certain model and they switch they can end up with different results.
If you find the video useful and would like to tip you can buy me some electricity for all these image generations. It is greatly appreciated! ko-fi.com/kleebztech
SO Frecking useful!! Thank you Kleebz! Your videos are always great, unique and valuable=)
Thanks. I had no idea what FreeU was used for much less capable of. Good Turorial!
You're welcome! I still don't fully know but I at least now have a little bit of an understanding myself. Hard to do extensive testing and having to adjust it constantly. But I really think it's something that you need to experiment with to get a feel for what does what.
My thoughts exactly. It's just a smoke without fire claim to say that FreeU makes your generations always better. It's very subjective. I've found it most useful to fix a finger or two or pose in an image without having to inpaint, when you wiggle around with FreeU settings.
Great workshop! Thank You!
freeU basically plays with VAE layers of model, in sd1.5 to sdxl there are 4 VAE channels it basically plays with the weights of those channels and there is no telling which channel is better or contains what its mostly used to correct color.
also SD3 will have 16 VAE channels..
Thank, teacher =)
You are welcome!
Great vid :)
Thanks!
Great video
Thanks!
Thank you. It's a little different question, but how can I use the eular a sampler in fooocus?
Did it have any effect on accuracy like the Viking ship with FreeU enabled was better than without because it fixed the mast placement or maybe better fingers ? Thanks for the setting guide hope we see SD3 come out this month.
For some images yes. But I haven't run enough images to really determine much about that.. It could just be that it places them differently and not necessarily better because of certain settings. If I figure a way of automating it then I might have better chances of testing. Just a real pain to run tons of images this way. I might be able to do that in something else though.
great information
Hi! Thank you for sharing with us this Fooocus tutorials. I really appreciate. I have a question. Is it possible to increase the number of the steps in Fooocus? For example: Quality goes to 60 steps, can I make the quality goes to 100 steps?
I think you can only do that in the debug settings with the "Forced Overwrite of Sampling Step" slider. Drag that up to 100.
@@KLEEBZTECH You got it! Thanks!!!
Muy buen video, como siempre , aportas gran cantidad de información muy valiosa. Tengo una duda , haber si me puedes ayudar , que tiempo te tarda a ti en generar 1 o varias imagenes con SDXL en fooocus o otras herramientas con tu rtx 3070? , yo tengo actualmente un rayzen 7 1300X con una GTX 1070 y no se si valdría la pena instalar fooocus en local o mejor generar las imagenes en google colab. Espero tu respuesta , muchas gracias por el video. Un saludo
It takes about 35 to 40 seconds. If doing locally you may want to do the lightning ones. Yours will be very slow.
Just wanna ask why do you need image generation! What do you do with them?
Some of it is just I like to create stuff. I also like to learn. So I figure as I learn I might as well share what I learn. But I have gotten some shirts done and prints made up for the wall. And some is work-related.
Plus I have a couple future projects I want to do with this stuff but AI isn't quite where I need it to be for what I want.
@@KLEEBZTECHI also have some future projects, such as content creation through AI-generated videos. However, the text-to-video capability is not quite capable enough yet.
And I love creating my own desktop backgrounds. I have several monitors and I have the backgrounds cycle through different ones.
The key is to be ready when the capability becomes available. Plus I love experimenting with everything. So many options.
Could FreeU help to create consistence batch for a video?
I'm not exactly sure what you mean but probably not.
Thanks.But we can I install juggernautXL8 . I have the juggernautXL -6 Version.Can you help me?
This video should get you in the right direction. You'll just download that checkpoint and put it into the folder. th-cam.com/video/GgEEb2K0j7s/w-d-xo.html
I found it.Nr.8 works well.Can I remove juggernaut 6 ? Thanks
You can but depending on how your preset is set up it may try to download it again if it doesn't detect it. Give it a try and find out.
thanks a lot for this can you make a tutorial on how to take piece of cloth and by doing image prompt on this we can dressed it to any person/model i request you to do this & keep going 💪
I would love to do something like that but I don't know of any real way of doing that with the image prompt reliably. Simple clothing you might get away with it for the most part but not for anything more complex. I'll play around with it some more and see if I can find anything to make it more reliable.
@@KLEEBZTECH i've got an similar tutorial for you if you're justgetting started th-cam.com/video/U8vyw1nbJlM/w-d-xo.htmlsi=9p-tA583-YeilKno
Is juggernaut xl v9 better or juggernaut xl v8......??
I don't know if either one is better. I use nine occasionally but still mostly eight.
Can foocus do Img2img batch
No.
i see people using juggernaut v8 and not v9, you know why is that?
Most people are still using the default. Plus I find just because it's a larger number doesn't necessarily mean it's better. Often these are trained a little bit differently. And when people get used to a certain model and they switch they can end up with different results.