วีดีโอ

Which screw driver are u using for unscrewing heatsink , please tell

Unfortunately, I could not use the FLASH button on the back of the mainboard. I had to take a USB stick and connect it to the computer (format it to FAT32), then I downloaded the file from the MSI website under BIOS files. I unzipped the zip folder and loaded it onto the USB stick without renaming it. Then I went into the BIOS under M-Flash and selected my USB stick with the file on it.

thank you for this video which provides useful information for generating areas of an image using mask. I'm going to try this technique and hope it succeeds. Congratulations for everything you offer in terms of content. best wishes.

Could you maybe mix the inpainting with a photo of a real hand in ControlNet (PyraCanny)? Then the point is having a database of real hand photos in different poses...

Should i use lora sd_xl_offset with playground 2.5 or use no lora at all?

Great Tutoriual, Helped me a LOT!!!!!!!!!!!!!!!

really struggling with it adding on to the product right around the mask. Any advice how how to get it to stop generating right onto the product?

Hi , would be possible impaint a real photo into another real photo both uploaded by you . Thanks

Dark mode in any browser 127.0.0.1:7865/?__theme=dark

What if it's not marked how do i know which usb port to use?

Does it work if you have 15 GB free in drive?

I'm doing this on with a Z690-A WiFi motherboard so that I can run a i13500 CPU but I think the update got interrupted as the USB only flashed for about 30 seconds and then nothing, following that the light on the board turned solid instead of flashing. If the update has been interrupted then would the file be corrupted?.....and if this is the case then can I just wipe the USB and redownload the file to the same USB again?

I am using fooocus primary as a inpainting and controlnet tool for photorealistic images, so playground is useless for me. But thank you very much for information.

When to remove Usb during installation, and do we need to change boot order after installation ?

I am using MAC and unable to install the fooocus and been using it on google colab. How can I install this Mask generation model on Google colab? Thanks~

This is what I've been loking for. How do I get the metadata from a previous generation that does not show up in the history log?

Generated a girls face with tensor art that i like it. Got that image and uploaded in image prompt and face swapped.any image generated by a highly detailed prompt will only give me the same expression and pose .sadly

I have nvidia gtx 1050 4 gb ram with 8gb ram and foocus doesn’t work .cannot generate photos .roght after installation when i enter prompt in the Ui ,it gives me error . Any advice ??

Everything i learned about Fooocus its from your teachings. Thank you very much Sir

So, I may not get a response but eh, hoping for the best lol So the update is as of posting this running for almost an hour. The flash BIOS button is blinking, motherboard LEDs are also all still on, my USB (which keeps blinking as long as it's plugged in) is also still blinking. Should I just wait longer? Or should I just power the thing off (hope for the best I didn't break anything) and build the PC far enough to check if it worked?

dude, you just changed the game for me, thank you so much for the info. How do I solve cuda issues? I have a 3060 12gb and keep getting cuda issues

dude,you are my fooocus mentor. Could you please make a video on how to get comic accurate outfit for fooocus? and how to change textures? possibly like if I were to take a shark and put an iron man armor on the shark kinda deal

Hey dude I just realized my mobo does have a flash plus and so that means I can update bios when computer is shut off?? This is because my pc has problems with black display after restart so I don’t want update it normally

thanks

Thanks

Im on a Mac so I use Pinokio and they do not have a version that uses the latest Version of Fooocus.. I found out how to install it. First I deleted my Fooocus through Pinokio then I used the terminal instructions on the GitHub to install, then I ran the Pinokio went to discover and found Fooocus and ran its installer and its in there :) Playground_v2.5.. Also the new interface .. and the results are SWEET. Now if I can get consistent camera angles. (do not know if I can yet just started playing with it .)

Hey dude this was helpful but my pc has restarting issues whenever I restart monitor just displays black. Would updating bios be dangerous since I’ll have to force shutdown and turn back on for monitor to display again. Also what would you recommend I do thank you

Perfect! Thank You!

thanks

Is it possible to delay the prompt? in A1111 you can use [prompt:steps] to delay the prompt for x amount of steps but it doesnt seem to work in Fooocus

I have the Z690-A it doesnt have a bios USB or a Bios FLBK button... so what am i suppose to do?

Only mask and inpainting , that's it ?

I am putting a cooler master 120l into a hp 6300 sff. The 6300 sff does not have a cpu_fan header, only ch1, ch2_fan headers. The cpu is cooled by shroud and case fan. I am upgrading the i3 with an i7. With new 600w psu. I can power the pump and fan but I don't know how to control the fan speed automatically with cpu load. I don't really want the fan running 100% speed 100% of time, but I understand the pump needs 100% speed, 100% of time. Thanks for suggestions. I don't know, maybe ch1_fan can be set up in bios like a cpu_fan?

thanks

can you really help for how to use it fully cli based? please

how do i add fooocus and comfy ui to stability matrix?

Wow! It's always amazing what's possible with fooocus. Thank you for today's revelation. ;-)

I learn so much from your videos. Really useful. Thanks

How much time will this take me to upscale X2, if I have an Nvidia 1660?

Hi, I'm your new subscriber! Thanks for much needed information...

Thank you for the video!

Great video, exactly what I was looking for! I need to apply a text as carved in a rock... have to try if it works!!

Thanks

thanks

Great tutorial video. This was very helpful to me. Especially getting text aligned properly in an image like what you did.

Thanks for the video, super helpful! Was able to find what was eating up my drive space!

In the middle of the process now. Best video by far. I actually have the bios flash light on my MB, will that turn off once it’s done? Cheers

That led dont stop blinking try it couple of times nothing works, first time try it after couple of minutes blinking led get solid and after that try it again but this time dont stopping blinking

This was the video i needed

thanks