Hi, I'm win 10 user.. I do just simply (using stereo cable) and its cheap😊hope for mac user can work too.. Requirement : - A1. Pc must have active onboard audio (do not disable audio onboard from bios setting) - A2. Pc/laptop must have line in input (don't use mic input) - B1. Audio interface have more than 2 input and output channel (can use headphone too as source send to line input) - B2. If u not doing recording track in daw while live streaming, no need audio interface with more than 2 input channel (this if u not have line input in on pc/laptop, if exist line in on pc/laptop, 2 input channel can use for recording in daw while live streaming) C. Stereo cable Scenario : - A. connect the output of your audio interface output to line in on pc/laptop. or - B. connect the output from audio interface to the input/instrument in the same audio interface. Then open obs, audio capture, choose one source audio in (pc line in or audio interface input channel) Turn on monitor track in SO when u doing recording audio in daw (obs will capture the audio while recording in daw). Dont forget in daw/SO master bus to use vu meter calibrate to -12dB, -6dB. Limiter -0.1, -0.2, -0.3 or what u prefer for measure the signal u send to line input u can adjust for not to much hot or distorted. How much the signal audio level u send from daw to line in and obs is control from your audio interface GUI mixer, not from daw/SO mixer.
This has helped solve months of spending hours and hours of frustration trying to figure this out for livestreaming. Thank you and GOD bless you for putting this out there.
Joe, thank you for doing this. I was racking my brain following some of the OBS directions (they have it wrong, they have it as a multiple output device vs aggregate device). I followed your instructions and added the sub outputs and voila! It worked. I can't believe I couldn't find how to do this simply on the internet! This was a life saver. Thank you!!
@@JoePearsonGuitarist I also just shared on the Presonus forum. I've had some experience working with their tech folks, who are great, but can be confusing to work with if you are an amateur/hobbyist.
Thanks bro, I tried with soundflower which is a similar method but with my daw studio one I could not make it work. only with ableton and logic X. thanks to your steps I did it. bless bro.
this is so timely! I'm going to watch this even although I actually DO own LoopBack anyway - but just need to get my head un-muddled about how to do things.
Spent days trying to figure this out this is the only video that got me anywhere! Thank you for the good info!!! Does anybody have any info for how to route your effect sends to black hole? I created a send w reverb, sent that to a bus and to the bus to the sun mix but the effect doesn’t come through
wow!!!Thank you so much! works perfectly for me!! best wishes and I hope the gig gets back as soon as possible for all of us! Cheers mate! subscribed! you rock!
Thanks for this tip. I was about to buy Loopback . you may just have saved me £100. Hopefully it works with the DJ software I use for streaming. I did a video showing my Loopback set up on my channel. but ill be posting this if it works. Keep it up.
Thanks for the video! I have a question though - what should you keep in the Audio-Output MacOs settings? Should it be an Aggregate device? For some reason, I've followed all the steps but no coming sound to OBS from StudioOne :(
Sorry to hear you’re still having problems - can you clarify for me please, “what should you keep in the oudio output Mac OS settings” - if you mean the sound settings for the Mac via the control panel, then yes you should choose the aggregate device - and it should also be chosen as the sound source in obs - let me know if that’s not what you meant though 👍
You wouldn’t happen to know how to solve the feedback echo when using windows when broadcasting? I’m using studio one with the studio 68c interface. During training sessions I have to shut all my effects off and there’s still a crazy echo. :(
I you revisit the IShowU site you'll see that it is being deprecated due to kext changes from apple in coming updates making this solution useless and the replacement for IShowU will ofcourse not be available for download outside their commersial software. Any thoughts on this?
Interesting - I don't know about that, but I have noticed that the latest version of studio one, released recently, seems to make provision for live stream routing, direct from the DAW to something like OBS, probably worth checking that out (I actually wondered whether they'd watched videos like mine and decided to create an add it to do it in the software)
Has anyone else had issues with Studio One 5 crashing ? Once I followed this video, absolutely to a T. Downloaded the shiny white box. Set up the interface in midi audio. When I go to preferences in studio one. Then select the audio device we made in midi audio app. Studio one skips and after a few moments. I have to force quit. Anyone else have this issue ?
Hi, I'm win 10 user.. I do just simply (using stereo cable) and its cheap😊hope for mac user can work too..
Requirement :
- A1. Pc must have active onboard audio (do not disable audio onboard from bios setting)
- A2. Pc/laptop must have line in input (don't use mic input)
- B1. Audio interface have more than 2 input and output channel (can use headphone too as source send to line input)
- B2. If u not doing recording track in daw while live streaming, no need audio interface with more than 2 input channel (this if u not have line input in on pc/laptop, if exist line in on pc/laptop, 2 input channel can use for recording in daw while live streaming)
C. Stereo cable
Scenario :
- A. connect the output of your audio interface output to line in on pc/laptop. or
- B. connect the output from audio interface to the input/instrument in the same audio interface.
Then open obs, audio capture, choose one source audio in (pc line in or audio interface input channel)
Turn on monitor track in SO when u doing recording audio in daw (obs will capture the audio while recording in daw).
Dont forget in daw/SO master bus to use vu meter calibrate to -12dB, -6dB. Limiter -0.1, -0.2, -0.3 or what u prefer for measure the signal u send to line input u can adjust for not to much hot or distorted.
How much the signal audio level u send from daw to line in and obs is control from your audio interface GUI mixer, not from daw/SO mixer.
This has helped solve months of spending hours and hours of frustration trying to figure this out for livestreaming. Thank you and GOD bless you for putting this out there.
Happy to help!
Man your endless search resonated with me I've been looking for a solution for weeks! Thank you for your hard work!
Really glad to help mate - happy steaming!
Joe, thank you for doing this. I was racking my brain following some of the OBS directions (they have it wrong, they have it as a multiple output device vs aggregate device). I followed your instructions and added the sub outputs and voila! It worked. I can't believe I couldn't find how to do this simply on the internet! This was a life saver. Thank you!!
Rowan Samuel really glad to help - I was in exactly the same situation - good luck with the streaming!
@@JoePearsonGuitarist I shared your youtube on link on the OBS forum as well. I was searching online for days for how to do this!
Rowan Samuel cool thanks for the share - great to get more folk aware of this 👍
@@JoePearsonGuitarist I also just shared on the Presonus forum. I've had some experience working with their tech folks, who are great, but can be confusing to work with if you are an amateur/hobbyist.
so helpful!!! almost went and bought loupback and then I finally saw this.!!
Dude thank you. Finally. All I’m trying to do is lessons and share my audio in studio one with the student. You just saved me! Thank yooooooou
Happy to help bro! 👍
Thanks for the help, dude! I could NOT figure this out when I tried months ago, but I'm glad I found this video later than never haha.
Thanks bro, I tried with soundflower which is a similar method but with my daw studio one I could not make it work. only with ableton and logic X. thanks to your steps I did it.
bless bro.
this is so timely! I'm going to watch this even although I actually DO own LoopBack anyway - but just need to get my head un-muddled about how to do things.
You are an absolute life saver!!!! Thank you sooooo much!!!
Spent days trying to figure this out this is the only video that got me anywhere! Thank you for the good info!!! Does anybody have any info for how to route your effect sends to black hole? I created a send w reverb, sent that to a bus and to the bus to the sun mix but the effect doesn’t come through
wow!!!Thank you so much! works perfectly for me!! best wishes and I hope the gig gets back as soon as possible for all of us! Cheers mate! subscribed! you rock!
Really happy to help bro 🤘
Thank you so much for that tut, I'll try that
This is amazing. Great work. Is there a Win 10 work around? Can the same thing be used?
I think it might actually be easier with windows machines, I’ve head the audio routing is more accessible than on a Mac - I’m not sure though!
Does this work on Windows?
Thank you so much! I was already most of the way there but I just needed to create that extra output and you helped me realise this :)
I’m pleased it was helpful! 👍
Thanks for this tip. I was about to buy Loopback . you may just have saved me £100. Hopefully it works with the DJ software I use for streaming. I did a video showing my Loopback set up on my channel. but ill be posting this if it works. Keep it up.
Thanks for the video! I have a question though - what should you keep in the Audio-Output MacOs settings? Should it be an Aggregate device? For some reason, I've followed all the steps but no coming sound to OBS from StudioOne :(
Sorry to hear you’re still having problems - can you clarify for me please, “what should you keep in the oudio output Mac OS settings” - if you mean the sound settings for the Mac via the control panel, then yes you should choose the aggregate device - and it should also be chosen as the sound source in obs - let me know if that’s not what you meant though 👍
Joe Pearson I figured out I needed to install the latest OBS to get it working! Thanks you’re a rockstar! 🔥
Brilliant !! Thanks Bro!
God bless you sir
cheers! and happy streaming
Thanks man been looking for something for Mac and studio one
Happy to help!
Hay man if your still active would
Love to ask a few questions on this as a fellow Welshman
Absolutely no problem mate! If you like you can email me (lots of contact details on my “about” section on my channel )👍
Thanks... I needed this!
Thank youuu! I’ve been looking into this for the past 2days! Thanks for the Information! P.S just subscribed 😊
Really happy to help! And thanks for subscribing really appreciate that! 🙏
You wouldn’t happen to know how to solve the feedback echo when using windows when broadcasting? I’m using studio one with the studio 68c interface. During training sessions I have to shut all my effects off and there’s still a crazy echo. :(
Thanks, we have been looking for a way to make this work.
Happy to help 👍
Thank you so much
this was so good
You are never going to get bored while in lock down....lol
I you revisit the IShowU site you'll see that it is being deprecated due to kext changes from apple in coming updates making this solution useless and the replacement for IShowU will ofcourse not be available for download outside their commersial software. Any thoughts on this?
Interesting - I don't know about that, but I have noticed that the latest version of studio one, released recently, seems to make provision for live stream routing, direct from the DAW to something like OBS, probably worth checking that out (I actually wondered whether they'd watched videos like mine and decided to create an add it to do it in the software)
thank you so much, but Gran sur in OS X no longer supports Ishow
nice one
Im using Studio live 16.4.2. and Aggregate device doesn't show up as an option for playback, only iShowU ?
I’ll look into this for you and see if I can see why 👍
Has anyone else had issues with Studio One 5 crashing ? Once I followed this video, absolutely to a T. Downloaded the shiny white box. Set up the interface in midi audio. When I go to preferences in studio one. Then select the audio device we made in midi audio app. Studio one skips and after a few moments. I have to force quit. Anyone else have this issue ?
What about windows 11?
when people doing tutorial like that why they not post link into descriptions .... so annoying
How do I do this on a windows pc
Like create the 3 and 4 channel output and create the new device to split the audio
so dis-organized...get your thoughts and screens together before starting a video!!!
hater smh
9:40