Good for you man! Just be careful out there especially if you are driving fast. I got a 2019 Q50 RS. I have not done any mods either because I don't want to void my warranty. If you get some good cold air intakes, a JB4 and downpipes, you should be alright. I got the LED front emblem but have not installed it yet. You can do a lot of mods to these cars because of their friendly platform. AMS has some good kits. There are also a lot of resources on here that can help you out. That Stinger is nice too. It cannot mess with the G70 though.
@killbsn There is nothing wrong with taking your time and building it right. I am just scared of blowing my engine or turbos. I like my Q50 RS and G70 3.3T. I plan on keeping both of them for a while. I am not a street racer, but people are always trying to race me anyway. I don't race a lot and just want the extra power to have if needed. I don't want to abuse my babies like others before us have done. LOL.
@@killbsndon’t worry about that. But you will need a pcv system. The turbo seals blow because of excessive crankcase pressure. I’ll tell you what you need to do.
You should make a custom pcv system. Crankcase pressure is bad for these engines. A 20 dollar Amazon 2 way catch can with atmosphere filter.and 3/8 hose with 2 spring loaded check valves and 2 diaphragm check valves, and a silicone 3/8 plug, and also a 3 way hose connector Y configuration .can works just fine, and you should replace your pcv valve while your at it. Here’s the configuration. 3/8 hose from pcv valve to catch can, the catch can out port to intake manifold. Check valve(spring loaded) should be placed in the 3/8 hose that goes from the catch can to the intake manifold to prevent boost from entering the catch can when you add the atmosphere filter so you have no boost leak and no vacuum leak. Then add the third port from the top of the catch can which will connect to the filter add a 1 foot 3/8 hose from catch can top port to the atmosphere filter, add another check valve (spring loaded) from catch can to atmosphere filter( use the check valve to connect the filter to the 3/8 hose). Then take the passenger intake hose off then reroute it to the catch can area( plug the passenger intake with the silicone plug. Don’t need to disconnect hose from valve cover just connect it to the 3/8 hose with a diaphram check valve. Then at the end of that 3/8 hose add a Y connector so that you connect both the catch can to filter hose and the passenger intake together( make sure the Y connector connects after the check valve ). Now tighten the hoses with gear hose clamps or zip ties. This will allow the crankcase pressure to enter the catch can and into the intake manifold at idle to ensure a smooth idle. But at high rpm’s the boost will block off the check valve which will make the pressure escape to the filter into the atmosphere. Best setup for sure to remove excess crankcase pressure, and will never let oil get to the intake manifold nor intake on the passenger side. For my setup I put the catch can in the brake reservoir area. I’ll probably put up a short later to show how it’s done. Everything can be bought of off Amazon for a total of around 70-80 dollars
@@killbsn nothin really because I need that warranty lol. It came with the factory exhaust package and I dropped in a couple z1 filters. Badge deletes, chrome deletes, tint. That's about it for me
enjoy it man, oil changes every 3-4k(AMS Oil, dont cheap out), check coolant levels often especially in the winter.
@@brianfrench9325 fs I’ll keep my eye on it
Def do that check it when driven about alarm it up and wait 3 to min after pulls or interstate speed before shutting it off let the turbos cool
If amsoil is too expensive get penzoil ultra platinum 5w-30. Almost as good as amsoil for half the price. Project farm confirmed.
Good for you man! Just be careful out there especially if you are driving fast. I got a 2019 Q50 RS. I have not done any mods either because I don't want to void my warranty. If you get some good cold air intakes, a JB4 and downpipes, you should be alright. I got the LED front emblem but have not installed it yet. You can do a lot of mods to these cars because of their friendly platform. AMS has some good kits. There are also a lot of resources on here that can help you out. That Stinger is nice too. It cannot mess with the G70 though.
I appreciate it bro!! yeah I’m trying to get some intakes first thing but just taking it slow.
@killbsn There is nothing wrong with taking your time and building it right. I am just scared of blowing my engine or turbos. I like my Q50 RS and G70 3.3T. I plan on keeping both of them for a while. I am not a street racer, but people are always trying to race me anyway. I don't race a lot and just want the extra power to have if needed. I don't want to abuse my babies like others before us have done. LOL.
@@RR-nl2ep yeah bro I wanna go burble tune but I’m scared of blowing my turbos so idk just taking it step by step
Q60s hard I got a 2021 q50 luxe them sporty seats in the q60 hard
Tuff🔥
They're quite till you get on it. Make sure the turbo seals are or turbos have been replaced. Mines an 18 they revised them 18 and up
wait what?
@@killbsndon’t worry about that. But you will need a pcv system. The turbo seals blow because of excessive crankcase pressure. I’ll tell you what you need to do.
You should make a custom pcv system. Crankcase pressure is bad for these engines. A 20 dollar Amazon 2 way catch can with atmosphere filter.and 3/8 hose with 2 spring loaded check valves and 2 diaphragm check valves, and a silicone 3/8 plug, and also a 3 way hose connector Y configuration .can works just fine, and you should replace your pcv valve while your at it. Here’s the configuration. 3/8 hose from pcv valve to catch can, the catch can out port to intake manifold. Check valve(spring loaded) should be placed in the 3/8 hose that goes from the catch can to the intake manifold to prevent boost from entering the catch can when you add the atmosphere filter so you have no boost leak and no vacuum leak. Then add the third port from the top of the catch can which will connect to the filter add a 1 foot 3/8 hose from catch can top port to the atmosphere filter, add another check valve (spring loaded) from catch can to atmosphere filter( use the check valve to connect the filter to the 3/8 hose). Then take the passenger intake hose off then reroute it to the catch can area( plug the passenger intake with the silicone plug. Don’t need to disconnect hose from valve cover just connect it to the 3/8 hose with a diaphram check valve. Then at the end of that 3/8 hose add a Y connector so that you connect both the catch can to filter hose and the passenger intake together( make sure the Y connector connects after the check valve ). Now tighten the hoses with gear hose clamps or zip ties. This will allow the crankcase pressure to enter the catch can and into the intake manifold at idle to ensure a smooth idle. But at high rpm’s the boost will block off the check valve which will make the pressure escape to the filter into the atmosphere. Best setup for sure to remove excess crankcase pressure, and will never let oil get to the intake manifold nor intake on the passenger side. For my setup I put the catch can in the brake reservoir area. I’ll probably put up a short later to show how it’s done. Everything can be bought of off Amazon for a total of around 70-80 dollars
Don’t use zip ties use stainless steel hose clamps. This will save your engine of any of the common problems for 80 dollars.
This also prevents carbon deposits on the intake valves.
good shit bro that's my next car. by the end of 2024 ill get it.
@@YvngAMB keep grinding for it
Twin Turbo 😩😩
tinted tail lights possibly
🧤
Yessir gng🪖
downpipe and tune 👀
soon 🫣
Best 2 performance mods for this car right there☝️
Thats shit hard
bought it at 78k miles bruh
I like the 2 door white. I have the q50 RS 2021. How you get that at 17???😂
@@SavScorp22 I just be working man, what do you have done to your Q
@@killbsn nothin really because I need that warranty lol. It came with the factory exhaust package and I dropped in a couple z1 filters. Badge deletes, chrome deletes, tint. That's about it for me
Oh and the little duckbill spoiler almost forgot that's on there
@@SavScorp22 nice bro
80k miles 😂😂
Its a infiniti not ferrari
Fam is you driving on the right side? 🧐
@@SavScorp22 nah the left bro 😭
Akebono