I have a Bell, TLD and a Shoei. The Bell is easy to use and clean with the magnetic chin strap and check pads. But....l feel the Safest and most comfortable in the Shoei !
I feel like the Thor reflex gets 0 love from the Industry has some of the best tech in a helmet available and it's 1/3rd the price of these there are multiple pros that wear them as well
I have a problem with my Klim F3 carbon pro. The liner covers up the rear 2 exhaust/vent holes at the back of the helmet 95%. Not much air is being vented from the 2 biggest vent holes. Either I have the wrong liner (just got the helmet today), or the liner needs to be redesigned for the Pro's Koro-crush-tubes.
Klim: It is interesting that the green tubes that crush, crush only from the top. None start failing from the middle or the bottom. If the wall thickness is not thicker near the bottom, I have no idea how they control that crushing like that.
It crushed like that in the demo because the tubes are welded to each other, and they were uniformly supported on the bottom sitting on a flat surface. They work together to avoid compression. They were met with a concentrated uneven force from above with the curved ball so all the force of the ball was concentrated on a small number of tubes upon impact which was then dispersed through the welded structure to neighbouring tubes and then to the flat surface below. It's not a simulation of a crash - it's a marketing demonstration and not representative of what would happen when you smash your head into a tree.
@@dothetontim Very well said, I read it a few times. The tubes are connected together (welded I guess) all the way up their sides (guessing about 3/4" long), and I understand with your detail a bit better between that test/show (round ball on flat configuration), vs round head in round helmet. But since the tube structure is the same from top to bottom, does that explain why the crushing was only from top down? I can imagine with a head in a helmet after a head hitting crash, many of they can be laid/pushed over at the tops. Good reply man. Thanks. Doug in Michigan
"many of them can be laid/pushed over at the tops. Which would be a Mips system. Heck, wearing a winter stocking cap under the helmet would be a Mips system, or a helmet a bit too big. :)
For the first time I joined fantasy league because I wanted to be part of Moto in anyway I can until I can get a dirtbike again. Feels kinda good and I just wanted to thank you for hosting the fantasy league.
Japan makes quality products, Have always loved Shoei, i would say only thing i wish they did was make different color lining , they keep the same old grey insert which turns brown pretty quickly
I have an astars sm10 that I like however the mips liner will ruin quick if you machine wash it several times. It’s just a crappy plastic and synthetic band. Having trouble finding spare liners even on eBay. Needless to say I just bought an answer ar7 hyper carbon because I couldn’t pass up the price for $199 online. Has anyone tried it?
The lightest helmet of this lineup would be the Fly Racing Formula S Carbon: www.rockymountainatvmc.com/riding-gear/fly-racing-formula-s-carbon-helmet-p?c=524
I bought a Fly Formula CC from RM. I tried all the ones I could not afford and the Shoei was the most comfortable, kinda by far. These are all damned nice helmets, a couple with "clunky" fits for me, but I ended up with the Fly CC because the crash technology was most like the top one. No doubt, I feel solid and safe as you can be in the Formula, though I haven't given it a "good" test yet. Very light helmet to me, too
They cant sell them here in America because they are not DOT certified / approved, You can buy them online outside of RockyMountain. Just go with a size bigger. I ride them as well as most of the European riders. As light as Carbon and some with tons of accessories for a fair price.
Rocky MTN, use your influence to ask manufacturers to develop more Enduro specific models. In the forest, creeping through the rocks and logs with low air flow, we need big ventilation and vents to release heat. 😀👍
Great review video as usual. I wish you mentioned the chin straps for each - Klim’s magnetic clasp is awesome compared to Bell’s double loop. Maybe next time 💪
I just got the helmet. Unlatching it is easy, just tug a bit (very light tug), on the red flag. Latching it up with a tight chin strap that barely reaches is a trick, (which is why all the vids use a loose strap that we should not ride with. Hmmmmm). 2 hands don't fit in there. It took me about a 1/2hr total, with a tight enough strap, to figure out how to easily latch it up, with only my left hand. The end of the extra strap end is short enough to tuck all the way into the strap sleeve, so nothing flops around in the wind. Since I found a good method to latch it up, I timed myself. It is a snug helmet to get on and off, so there are a couple seconds there. But I timed, "Put the helmet on. Snap up the strap. Unsnap the strap. Take the helmet off." 12 seconds, first time.
But I timed, "Put the helmet on. Snap up the strap. (add, make sure the strap is secure), Unsnap the strap. Take the helmet off." 12 seconds, first time.
BTW the Klim F3 Carbon "non-pro" is an awesome helmet in its own right. I picked one up this past summer and absolutely love it moving from a Fox V2 and Shoei Hornet X2 for adv riding up at the cottage. At full price I'd spend the extra $100 for the Pro, but the non-pro F3 Carbon can often be had for much much less than MSRP with sales on last year's colors.
love that you mentioned the shoei hornet x2. its the BEST helmet ive ever had. just heavy! but quiet and fits soooo well. may pick up the klim just based off your recommendation
Why doesn't Rocky Mountain sell Airoh helmets many top riders use them and Arai used to be a top tear helmet but they are never in these top lineups either.
Just took a big hit in my Moto-10 Spherical, and sent them the video of the crash along with the pictures of the helmet. Came back saying they would offer 20%. On that note, time to change from Made in China to a Made in Japan (Quality). Debating whether to do Shoei or Arai
It did hold up, but in the footage I sent them, you can see the helmet's sharp Edges get caught up. I can only assume that an Aria's profile would have rolled a lot better. My neck hurt for a whole week afterwards. The 6D ATR-2 or 3 is another great option I personally use @@dakotapettit4544
I have been using aria for years and I have crashed in other helmets and aria on road and off-road . In crazy impacts the arai was way better. I did just get the new Alpinestar m10 carbon, hopefully it's just as protective because it fits awesome
Apart from it weight about the same as a small car it need up dating, raced in an arai shoei and bell moto 9& moto 10 and the moto 10 is easily best out of them
I need one good helmet for competition. I dont care to spend alot on it as it literally is a one time hit throw away item in my eyes. after one good whack it's done. I would like one that is at least convenient with removable pieces so I can wash it. maybe a break away visor that will just pop back on if I dump it down by accident real quick. I just cannot bring myself to spend so much money on a single helmet. some of these helmets are 600 plus dollars why so much. my goodness lol I do appreciate good craftsmanship though. no more black helmets for me. all white or color from here on out. black is just too hot.
Paid 880 for a moto 10....... was absolute trash unless your head is the shape of a bowling ball, literally. And like he said it was CRAZY CRAZY heavy. Tried 2 sizes. It was never gonna happen....... sent it back and paid 799 for the FLY Carbon S...... BEST HELMET I HAVE EVER USED IN MY ENTIRE 31 YEARS OF RIDING. HANDS DOWN. It is super light it fits sooooooo much better and its just a better dirt helmet all the way around. Also comes with a spare visor (moto 10 didnt) and it comes with a much better storage bag then the Bell. I promise you the Fly is a better helmet all the way around and its almost 100 less. If you forget all the "smart features" the helmet itself is just the best.... period. The extras are just a plus
I recently got the Fly Formula Carbon. I have Astars M8, 6D ATR2, Leatt 8.5. I think the Fly is the best overall, especially if you ride in the forest with low to no airflow.
I have the bell moto9 and love the fit, tried on the 10 and they definitely went with a different mold for head shape, and I agree, fits terrible. Bought a Fly Formula CP, awesome fit for me, decent price. Tried on the shoei and it felt good but man that’s got a steep price, tried on most of the others and wasn’t impressed with their fit either
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
Check out our best mx helmets here: rmatvmc.link/best-mx-helmets-2024
Why no Alpinestars SM8/SM10? I love mine. Won all the championships this year.
Why no 9.5 Carbon from Leatt?
What about the airoh aviator? What do you guys think about it
Not available in the US, they won't consider it
Any reason the Leatt 8.5-9.5 helmets didn’t make this list? I’ve contemplated getting one of those.
LEATT 9.5 Carbon is 2.63 lbs. The 360 turbine technology is phenomenal for fit and comfort with great ventilation. Well worth checking out.
Alpinestars m10?
I have a Bell, TLD and a Shoei. The Bell is easy to use and clean with the magnetic chin strap and check pads. But....l feel the Safest and most comfortable in the Shoei !
My top three favorites as well, TLD, Shoei then Bell
I’ve got the 6D ar2 I love it it vents really well and I like the looks of it very comfortable to wear
2:30 I was waiting for 'it automatically orders a replacement helmet'
Shoei you can´t go wrong with, but my son did change to alpinestars supertech s-m10 Carbon this summer and he just loves it.
I feel like the Thor reflex gets 0 love from the Industry has some of the best tech in a helmet available and it's 1/3rd the price of these there are multiple pros that wear them as well
I have a problem with my Klim F3 carbon pro. The liner covers up the rear 2 exhaust/vent holes at the back of the helmet 95%. Not much air is being vented from the 2 biggest vent holes. Either I have the wrong liner (just got the helmet today), or the liner needs to be redesigned for the Pro's Koro-crush-tubes.
I’ve always loved Troy Lee Designs for the safety and the art. Shoei is my close second. Bell is third
Do any of these have speaker pockets? Would love one of these helmets for trail riding and use with a Cardo
FLY does
The fox v3 also has speaker cut outs
Klim: It is interesting that the green tubes that crush, crush only from the top. None start failing from the middle or the bottom. If the wall thickness is not thicker near the bottom, I have no idea how they control that crushing like that.
Ohh sorry. 12:15
It crushed like that in the demo because the tubes are welded to each other, and they were uniformly supported on the bottom sitting on a flat surface. They work together to avoid compression. They were met with a concentrated uneven force from above with the curved ball so all the force of the ball was concentrated on a small number of tubes upon impact which was then dispersed through the welded structure to neighbouring tubes and then to the flat surface below. It's not a simulation of a crash - it's a marketing demonstration and not representative of what would happen when you smash your head into a tree.
@@dothetontim Very well said, I read it a few times. The tubes are connected together (welded I guess) all the way up their sides (guessing about 3/4" long), and I understand with your detail a bit better between that test/show (round ball on flat configuration), vs round head in round helmet. But since the tube structure is the same from top to bottom, does that explain why the crushing was only from top down? I can imagine with a head in a helmet after a head hitting crash, many of they can be laid/pushed over at the tops. Good reply man. Thanks. Doug in Michigan
"many of them can be laid/pushed over at the tops. Which would be a Mips system. Heck, wearing a winter stocking cap under the helmet would be a Mips system, or a helmet a bit too big. :)
For the first time I joined fantasy league because I wanted to be part of Moto in anyway I can until I can get a dirtbike again. Feels kinda good and I just wanted to thank you for hosting the fantasy league.
We're happy to do it and glad to have you joining us! 🙏
what do you think about the just1 j40 helmet?
Unfortunately we are not familiar with that helmet.
Japan makes quality products, Have always loved Shoei, i would say only thing i wish they did was make different color lining , they keep the same old grey insert which turns brown pretty quickly
I feel safest and the most comfortable in the Shoei, but it is the hardest to tear down and clean, and put back together
If they could make the Shoei as easy to clean and use as my Bell, it would be the best.
I have an astars sm10 that I like however the mips liner will ruin quick if you machine wash it several times. It’s just a crappy plastic and synthetic band. Having trouble finding spare liners even on eBay. Needless to say I just bought an answer ar7 hyper carbon because I couldn’t pass up the price for $199 online. Has anyone tried it?
Ece 2206 over Snell. Snell helmets are to hard for dirt.
which one is the lightest helmet ?
The lightest helmet of this lineup would be the Fly Racing Formula S Carbon: www.rockymountainatvmc.com/riding-gear/fly-racing-formula-s-carbon-helmet-p?c=524
I bought a Fly Formula CC from RM. I tried all the ones I could not afford and the Shoei was the most comfortable, kinda by far. These are all damned nice helmets, a couple with "clunky" fits for me, but I ended up with the Fly CC because the crash technology was most like the top one. No doubt, I feel solid and safe as you can be in the Formula, though I haven't given it a "good" test yet. Very light helmet to me, too
What about Airoh helmets?
They cant sell them here in America because they are not DOT certified / approved, You can buy them online outside of RockyMountain. Just go with a size bigger. I ride them as well as most of the European riders. As light as Carbon and some with tons of accessories for a fair price.
Neither was the KLIM
Why don't you guys do the Airoh Aviator helmets
What helmer wouls you say had the smallest shell? I love my previous generation Leatt GPX 5.5. I'm looking for something like that.
It depends on what size helmet you wear. I would say my new Fox V3RS has one of the smallest shells. - Chase
@@rmatvmc i wear a large. I may go into the Winchester warehouse and try one of those on. Thanks Chase 🤙
@@_Bryant.RI can confirm the new V3 RS is the smallest helmet I own. Comparing with a FLY Formula and a Bell Moto-9 Flex.
I have the 6D ATR2 supercomfortable.. super fitting for me.. also nice airflow without getting uncomfortable coldspots.. super helmet
Just wait til you see their new helmet!!!!!!! - Chase
Klim helmet so light breathable good thanks for reviews 👍🇬🇧
No problem 👍Thanks for watching!
I got the SHOEI VFX. its sturdy and comfortable. My skull feels nice n protected, while looking really cool! with the right googles of course.. lol
They're great helmets! What goggles are you rocking with it?
@@rmatvmc SPY and 100%
do you recommend?
Rocky MTN, use your influence to ask manufacturers to develop more Enduro specific models. In the forest, creeping through the rocks and logs with low air flow, we need big ventilation and vents to release heat. 😀👍
Try out the Klim then with the tubes instead of just EPS. There’s a hard enduro guy on TH-cam that seems to only wear Klim.
How many years are these helmets good for? Obviously, crashes make a difference, but ballpark, how long?
I don't know if it's the same for every helmet company, but many companies say that you should replace a helmet after 5 years. - Chase
@@rmatvmc thank you. That’s not bad. About $150 each year to use.
That's a good way to look at it.
Great review video as usual. I wish you mentioned the chin straps for each - Klim’s magnetic clasp is awesome compared to Bell’s double loop. Maybe next time 💪
I just got the helmet. Unlatching it is easy, just tug a bit (very light tug), on the red flag. Latching it up with a tight chin strap that barely reaches is a trick, (which is why all the vids use a loose strap that we should not ride with. Hmmmmm). 2 hands don't fit in there. It took me about a 1/2hr total, with a tight enough strap, to figure out how to easily latch it up, with only my left hand. The end of the extra strap end is short enough to tuck all the way into the strap sleeve, so nothing flops around in the wind. Since I found a good method to latch it up, I timed myself. It is a snug helmet to get on and off, so there are a couple seconds there. But I timed, "Put the helmet on. Snap up the strap. Unsnap the strap. Take the helmet off." 12 seconds, first time.
But I timed, "Put the helmet on. Snap up the strap. (add, make sure the strap is secure), Unsnap the strap. Take the helmet off." 12 seconds, first time.
I still love my JT ALS2. Airoh Aviator are the only ones that looks good today IMHO. :(
I look forward to these helmet reviews all year long 😅
Wow. Cool to see the emergency contact come to moto kudos to fly I guess. Look up angi system if subsriptions for a helmet isn't your thing!
BTW the Klim F3 Carbon "non-pro" is an awesome helmet in its own right. I picked one up this past summer and absolutely love it moving from a Fox V2 and Shoei Hornet X2 for adv riding up at the cottage. At full price I'd spend the extra $100 for the Pro, but the non-pro F3 Carbon can often be had for much much less than MSRP with sales on last year's colors.
love that you mentioned the shoei hornet x2. its the BEST helmet ive ever had. just heavy! but quiet and fits soooo well. may pick up the klim just based off your recommendation
Hello Rocky Mountain, why don't you have Airoh helmets?
Tony Cairoli would be angry ;)
Why doesn't Rocky Mountain sell Airoh helmets many top riders use them and Arai used to be a top tear helmet but they are never in these top lineups either.
No arai?
Always felt safer in a Bell or Shoei
Moto 10👌🏼
That colorway of Shoei is impossible to find.
Which one? The one that I ride in?
the one shown in the video!@@rmatvmc
What if I just drop that fly helmet and it calls 911 lol
It will give you a notification on your phone before calling 911 so you can cancel it before they're called.
What I don’t understand is why some of the helmets are black,has the designers of these helmets heard of albedo?
Lol that was my first thought. I don’t need a sun magnet on my head 😅
Aria!
👌👌👌
No alpinestar sm10? No arai? Come on guys…
I been wearing Bell for Decades, I found out it’s Made in China,I Bought an Arai
Just took a big hit in my Moto-10 Spherical, and sent them the video of the crash along with the pictures of the helmet. Came back saying they would offer 20%. On that note, time to change from Made in China to a Made in Japan (Quality).
Debating whether to do Shoei or Arai
@@cme982did your moto 10 not hold up well? And how bad of a bit did your head take? Did it do its job well? Thanks
It did hold up, but in the footage I sent them, you can see the helmet's sharp Edges get caught up. I can only assume that an Aria's profile would have rolled a lot better. My neck hurt for a whole week afterwards. The 6D ATR-2 or 3 is another great option I personally use @@dakotapettit4544
No Arai??? best helm ever made
I have been using aria for years and I have crashed in other helmets and aria on road and off-road . In crazy impacts the arai was way better. I did just get the new Alpinestar m10 carbon, hopefully it's just as protective because it fits awesome
Apart from it weight about the same as a small car it need up dating, raced in an arai shoei and bell moto 9& moto 10 and the moto 10 is easily best out of them
THIS
Arai is uncomfortable and for people with circular heads
tbh I had around 5 brands and Arai fits the best
No alpinestars
Arai!
I need one good helmet for competition. I dont care to spend alot on it as it literally is a one time hit throw away item in my eyes. after one good whack it's done. I would like one that is at least convenient with removable pieces so I can wash it. maybe a break away visor that will just pop back on if I dump it down by accident real quick. I just cannot bring myself to spend so much money on a single helmet. some of these helmets are 600 plus dollars why so much. my goodness lol I do appreciate good craftsmanship though. no more black helmets for me. all white or color from here on out. black is just too hot.
tfw watching this after already buying a helmet lol
Falta Arai
I swear by my shoei
Save your money and go buy airoh av 3
It doesn't feel like 3lbs when wearing it. Lol !!! 3lbs is 3lbs no matter how you cut it
Lmao how do u leave out the Astar? Its one the lightest and best made helmets out there this was lame.
Shoie and bell your prices are ridicules
Paid 880 for a moto 10....... was absolute trash unless your head is the shape of a bowling ball, literally. And like he said it was CRAZY CRAZY heavy. Tried 2 sizes. It was never gonna happen....... sent it back and paid 799 for the FLY Carbon S...... BEST HELMET I HAVE EVER USED IN MY ENTIRE 31 YEARS OF RIDING. HANDS DOWN. It is super light it fits sooooooo much better and its just a better dirt helmet all the way around. Also comes with a spare visor (moto 10 didnt) and it comes with a much better storage bag then the Bell. I promise you the Fly is a better helmet all the way around and its almost 100 less. If you forget all the "smart features" the helmet itself is just the best.... period. The extras are just a plus
I recently got the Fly Formula Carbon. I have Astars M8, 6D ATR2, Leatt 8.5. I think the Fly is the best overall, especially if you ride in the forest with low to no airflow.
I have the bell moto9 and love the fit, tried on the 10 and they definitely went with a different mold for head shape, and I agree, fits terrible. Bought a Fly Formula CP, awesome fit for me, decent price. Tried on the shoei and it felt good but man that’s got a steep price, tried on most of the others and wasn’t impressed with their fit either