Hello! I appreciate you for helping everyone! I would like to to build also my own 12v pack but first i have two questions, Where do i get the firmware from? When should i do all the settings, after conecting the 12v pack or before so it doesn't give any errors from the high voltage? Thanks!
hi can you help me with firmware after doing light setings 254 the stop light when braking not working. only turns on when ou turn on the lights but braking dount blink THx
In Germany it is not allowed to have braking light. That's why it is set to, because I don't want it to blink. So you can set there a lower number or put the settings. REVERSE. GOOD LUCK BUDDY
Hi, I have a external 12v battery that i have connected in series to give me 48v. I have flashed my scooter and when i hit about 17kms hour, the power to the scooter cuts out and i can only accelerate again after i have hit the brake.please note though i can't get it to go past 17kms hour. It fault just loops. Any ideas?
Hello...that 12v external shold have a capacity of 15.300mAh or more... if it has less capacity than requeirt, it will cut off. Send me an e-mail: g30maxforce@gmail.com Maybe we can find the problem why only 17km/h
I put the presets exactly as you did and for some reason throttle when I push it does not slow down it goes straight Max speed. Will not smoke or not stop spending unless I push the brake what does that mean? I don't have your version of the app though it is older and has not been updated yet do I need the most updated version of the utility app or could it be something else. The scooters also a x rental and can be flashed to stock firmware g30. I flashed these with the 48 volt firmware before with no issues but now it's doing this weird thing.
@@G30MaxForce how do I do that ?do I do that on the app or on the CFW website? Cuz like I said right now it's just when I accelerate it does not stop and then when I push the accelerator down, it slows down like it's functions are in reverse.
@@G30MaxForce I have three to five versions of that file that do the same thing. Including the Lutheran file didn't make the changes you did to it just hit the preset and downloaded it
Mit ST-Link nur...aber auch nicht 100% dass die Fehler behoben wird. Sonst...Neues Controller. Aber was genau ist passiert?? Hast du vielleicht ein Kurzschluss am Controller gebaut...oder kommt dass Fehler von alleine?
You can achieve that speed if you have a 48v Battery! In this video I showed only the right cfw for this Mod. 48v battery wasn't connected! In Germany here, the maximum speed allowed is 20km/h. Check this video th-cam.com/video/JM4ibMH6dkU/w-d-xo.html
I don't have an iPhone in order to be able to test it...but I was reading somewhere that the Companion App doesn't work anymore! Idk. 🤷♂️ Just buy a cheap Android!
You rock
Hello!
I appreciate you for helping everyone!
I would like to to build also my own 12v pack but first i have two questions,
Where do i get the firmware from?
When should i do all the settings, after conecting the 12v pack or before so it doesn't give any errors from the high voltage?
Thanks!
hi can you help me with firmware after doing light setings 254 the stop light when braking not working. only turns on when ou turn on the lights but braking dount blink
THx
In Germany it is not allowed to have braking light. That's why it is set to, because I don't want it to blink. So you can set there a lower number or put the settings. REVERSE. GOOD LUCK BUDDY
Hi, I have a external 12v battery that i have connected in series to give me 48v. I have flashed my scooter and when i hit about 17kms hour, the power to the scooter cuts out and i can only accelerate again after i have hit the brake.please note though i can't get it to go past 17kms hour. It fault just loops. Any ideas?
Hello...that 12v external shold have a capacity of 15.300mAh or more... if it has less capacity than requeirt, it will cut off. Send me an e-mail: g30maxforce@gmail.com
Maybe we can find the problem why only 17km/h
When I hit the throttle and hold it down the motor slows down but when I let off it speeds up again.
sounds like your throttle cable is connected in reverse
You installed backwards, the sensor on the throttle!
Do i need to do this before installing the battery?
I put the presets exactly as you did and for some reason throttle when I push it does not slow down it goes straight Max speed. Will not smoke or not stop spending unless I push the brake what does that mean? I don't have your version of the app though it is older and has not been updated yet do I need the most updated version of the utility app or could it be something else. The scooters also a x rental and can be flashed to stock firmware g30. I flashed these with the 48 volt firmware before with no issues but now it's doing this weird thing.
When I flash it back to the 36 volt preset it works fine no problem
That's weird! Have you tried to change the SN?
@@G30MaxForce how do I do that ?do I do that on the app or on the CFW website? Cuz like I said right now it's just when I accelerate it does not stop and then when I push the accelerator down, it slows down like it's functions are in reverse.
@@nicholasburton7066 You do that with Scooterhacking app.
But first I would try to create and flash the 48v file again...
@@G30MaxForce I have three to five versions of that file that do the same thing. Including the Lutheran file didn't make the changes you did to it just hit the preset and downloaded it
can i do this with max G30D old model
Yes of corse! 👍
Wissen Sie, wie Sie das Problem lösen können, wird error10.Ninebot g30D auf dem Bildschirm angezeigt
Mit ST-Link nur...aber auch nicht 100% dass die Fehler behoben wird.
Sonst...Neues Controller.
Aber was genau ist passiert?? Hast du vielleicht ein Kurzschluss am Controller gebaut...oder kommt dass Fehler von alleine?
I thought you set the speed limit to 45 kmh but your scooter went 30 kmh and 20. 😢
You can achieve that speed if you have a 48v Battery!
In this video I showed only the right cfw for this Mod. 48v battery wasn't connected!
In Germany here, the maximum speed allowed is 20km/h.
Check this video
th-cam.com/video/JM4ibMH6dkU/w-d-xo.html
Can you do this with iPhone
I don't know. Sorry.
How bout with fatmax motor?
I don't know!
Use the CFW from MaxMods for that!
How do I hack an electric scooter I have an iPhone Can I do it on the computer
I tried failed
I don't have an iPhone in order to be able to test it...but I was reading somewhere that the Companion App doesn't work anymore! Idk. 🤷♂️ Just buy a cheap Android!
I have G30e 2 can you send me the file please
Yes
F30E
I don't know 🤷♂️ But I think that will not work. So, you risk to brick your Scooter!