bro thanks for uploading more videos for different comparisons ... that help in taking a decision about which tool is perfect for me.... no one the doing what you are for poor people like us... actually, always late in buying any tool due to the reason... which one should i go for.............thanks a ton........... love you bro..
@@YOYODiagnostic when reviewing the 67 modules I’m not seeing any listed that cover 2013 GMC YUKON 6.2L. Do you know if General Motors / GM are covered with the SM2Pro? I’m looking to write to my ECU and change a Displacement on Demand setting.
The main reason for disconections is major voltage drop when pcm tuner conects to the ecu. If you pay atention ,when using pcmtuner , voltage is droping from 12.67 to 11.3, which is alot.... Sm2pro is not having this issue. Sm2pro drops only like 0.3v, reason why it makes it much more stable, then pcm tuner. I personally bought a cheap sm2pro and reworked it. Replaced about 85% of integrated circuits. Manage to reduse voltage drops to 0.05v when id and writing, super stable ! Pcmtuner it doesnt worth its money.
@@w1cked1337 to be honest, i am not a big fan of clones, that require internet to function.... I dont have it, i did not used it, so i wouldnt say its good or bad.... Main reason ididn't bought one, is if them servers stop working, you have left yourself with a 700usd brick...
I think best is to get pcmtuner dongle if you have original scanmatik 2 pro like or good/high quality clone scanmatik, at least then you know if there's any problems it is likely with the software itself and not the hardware, of course hardware can malfunction but not due to the quality of the used components in the SCANMATIK circuit
@@YOYODiagnostic Your videos highlight the Chinese scammers who sale junk products as goods. Thank you for letting us know how to disable the software on the firewall .
Hello I just bought Sm2 pro after seeing your video ! Thanks for your time to share with us ! I am curios iff you will open your device ( I did ) and let us know iff it requires rework ! Thanks
Hello , i just bought that clone BC of this vidéo , i install well but i try to work one mitshibi japjero in vain mh8304f. Please i need help to rework it
Thanks for the review. In your pro sm2 pro which board!? Green or purple!? It would be nice to see a photo of the board! Because there are different versions
Any ideas about PCM Master? Is it same as the one u showed in the video, or it’s some new variation? Also did you have any experience with Delphi CRD3 ECUs and this PCM? Thanks for a video!
An excellent insight. Since the PCMTuner server is dead does it mean the tool will not be able to work for ecus that require VR reading, e.g. Simos 8.3
Hello again sir. I must say i appreciate all the hard work you put in to inform us. I have another question and i hope you can find the time to answer or even someone else with expert skills. Am very new to tuning and i would like to know if both these tools can read Isuzu trucks(4hk1 and 4jj1 engines) Hiace minivans (2kd and 1kd engines), toyota coaster buses (no4c engines)? I plan to do dpf, egr and adblue deletes etc. Thanks in advance for your precious time
Hello, unfortunately, I haven't tested it on Japanese cars. I don't work on these type of cars very much and when I do I use Flex which is the best for Asian cars. When I used Flex via OBD, other programmers did not have these cars in the menu.
Hi Yoyo i tried both as you have here and the Plastic sm2pro is better than pcm tuner also it works out of the box and has no trojen spi software on the disk or the dongle i wish i had not baught the pcm tuner as i had to spend two days and a week to sort the burned transistors and software ,,,,,,, have you tried combi loader ??
I must say, that your lesson is the best and simple. You are really great. I have one question. Is this simmiliar with kess and ktag? And what software you think is the best for dpf,efr,adblue off. Thanks.
Hello, is the SM2pro clone best for hyundai Terracan 2.9 crd can it remove engine braking in TCU and upgrade engine power also....do you need to pay for each tune ? cheers Brett
I will soon buy this wonderful device but I don't know which model or model is better for the Middle East region... I want your advice, guys, and thank you how much
Hi YOYO , its a usefull video as always, so we can just buy clone dongle which having pcmflash software and use it with sm2 pro clone and it would be enough, am i right ?
very informative mate, I do have a question though. If you are familiar with them.. how would you rate Kess / Ktag systems against sm2 pro / pcm? cheers
Kess and ktag Clone are very good for older ECUs like EDC16. SM2 is much better for EDC17 but does not work via OBD. If you want to buy a clone that does the job of those mentioned, go for KT200, Foxflash or Tagflash
I noticed when you were using PCM tuner the interface selected was j2534 scanmatik - SM2 usb. Could that be the reason the pc tuner couldn't not read flash from ecu? I'm learning from you,let me know if that matters.
PCMtuner and SM2Pro are clones from Scanmatik. to be able to run the PCMflash software you need a Scanmatik dongle and interface, for this reason the driver used for these clones is Scanmatik.
As usual, awesome informative content ❤. There are multiple clones of SM2 on the internet, could you perhaps help us with a link to a good clone? Again thanks for the video and cheers 😊
Hello, Thank you for the video. What is the best tool for car ecu programming in Chinese market and original? I am thinking to get the new Chinese kt200 is that a good investment please?
Hello, KT200 is not something special, it does not have any extra functions compared to SM2pro for new ECU models starting with edc17. The only advantage is that it can read edc16 in Bench mode and you don't have to open them. KT 200 is equal in performance to Ktag clone + SM2 pro Clone. These cost 200 euros together and the KT 200 costs 600 euros. So a difference of 400 euros that is not justified. If the price of this programmer was 350 euros, I would recommend it, but I don't recommend it because it is expensive and works online, even if they made an offline dongle, you have to connect to their server for the first installation, so if these Chinese sellers decide to give up this programmer and shut down the server you can throw it away.
@@YOYODiagnostic Thank you for your reply. Yes your analysis is totally right. The problem is I already bought the pcmflash the clone thr first release with metal box not the new one. The one with that comes with 32in1 modules. But It didn't work with as it was advertised. I remember the last time I tried was on diesel golf mk6 with edc17xx but it failed to read the ECU. Maybe because of the tprot or something else. As many says I think my tool just need rework and upgrade the dongle to 64in1. But I am lost I don't know what to invest in. And I am actually short in money. My best purchase was the ktag and kess clone. They did a lot of job for me but for newer cars I don't want to take the risk without a backup tool.
@@mustaphaessahihi1762 rather than reworking that clone, you'd better buy the SM2pro clone, which costs only 140 euros, including the dongle. it is far superior to PCM Flash.
@@YOYODiagnostic thank you for your recommendation. I'll really consider that. If you could only help me with a link to the place you got yours from I don't want to lose my money again. The tool that I told you about cost at that time approx to 350 USD.
Hi I come again to this post. I bought sm2pro it looks exactly like yours. The problem is it didn't work also 😢. I had skoda last month with 2.0 tdi engine like the one golf mk7 ecu is EDC17C64 04L 907 309 C. It failed to read it both in module 53 and 71. Today I had q5 2011 2.0 TDI. ECU is EDC17C46 03L 906 018 MQ. it failed again to read it 😢. So I took the ecu to another guy who have foxflash and it was able to read without problems. Can you please share a video showing the motherboard of your SM2PRO please? I want to compare it to mine.
Get the vcx nano it will do the job for you. Probably be better going with the “se” I only have the gm version and I am able to do j2534 flash with ford and gm. I can even hook it to FORScan as long as the ford is late enough model to be can bus. Can’t say enough good about them. Only thing I don’t like is it shows up as a virus and defender will turn it off or delete the program in the worst times sometimes right in the middle of a flash
Hey there!. I will try Sm2 pro clone on edc17c46. Is the gpt1 gpt2 Adapter included in the cabel? Or i Need to Buy a Adapter to Boot this without Open?
@@j.e.g7085 did you forget we are talking about clones? The Kess V2 clone only works half of the cars that appear in the menu. In my case this ECU did not work, try it and leave a comment
@MHM81 nefmoto check that out online. Should work on both of those ecu. Tuner pro is on sale for $150usd on alot of sites I want to order one I think or mpps.
Hello you must also delete the registry from Windows. down in search write ,, regedit,, and search until you find the PCM registry folder and give it delete.
I know my English is bad but you didn't pay much attention either. Let me explain: - pcm tunner is a clone of Scanmatik pro(SM2PRO). - That programmer I use is called SM2pro Clone, which means that it is also a clone of Scanmatik. So neither one nor the other is original !! The comparison was made between two clones of the original Scanmatik product. There are 2 clones on the market. I hope I was clear enough in my explanation. Google it and you'll see what the original Scanmatik looks like !
Hello, I think you've misunderstood a bit how these programmers work. If you have a little patience and watch only 3 videos from what I have you will figure out what one does and what another does. The Tuning programmer is only Tuning and the other one is for other type of eeprom and flash.
Hello , i wrote you an email can you please send me the link where i can order the sm2 pro because there are 30000 different products on the internet and i dong know which is good
Hello, when I get to read your email I will reply. There are a lot of people who write by email, I can't be that fast because I have to work. If I respond faster on TH-cam it's because I take a break from my work and instead of smoking a cigarette I spend my time making a video or answering your comments.
@YOYODiagnostic Okey thank you very much i dont wanted to urge you, thank you for your great content , you making chiptuning more undestandable for people like me who want to learn it
bro thanks for uploading more videos for different comparisons ... that help in taking a decision about which tool is perfect for me.... no one the doing what you are for poor people like us... actually, always late in buying any tool due to the reason... which one should i go for.............thanks a ton........... love you bro..
I really appreciate.
Thanks for watching 👍
@@YOYODiagnostic when reviewing the 67 modules I’m not seeing any listed that cover 2013 GMC YUKON 6.2L. Do you know if General Motors / GM are covered with the SM2Pro? I’m looking to write to my ECU and change a Displacement on Demand setting.
@@secretrk13131
Hello,
unfortunately I don't have any experience on American cars.
Para coches americanos. Hp tuner.
The main reason for disconections is major voltage drop when pcm tuner conects to the ecu. If you pay atention ,when using pcmtuner , voltage is droping from 12.67 to 11.3, which is alot.... Sm2pro is not having this issue. Sm2pro drops only like 0.3v, reason why it makes it much more stable, then pcm tuner. I personally bought a cheap sm2pro and reworked it. Replaced about 85% of integrated circuits. Manage to reduse voltage drops to 0.05v when id and writing, super stable ! Pcmtuner it doesnt worth its money.
Thanks for Info 🙂
Please Can i hav u contack to help me rework to a sm2pro
What is your opinion about FoxFlash?
@@w1cked1337 to be honest, i am not a big fan of clones, that require internet to function.... I dont have it, i did not used it, so i wouldnt say its good or bad.... Main reason ididn't bought one, is if them servers stop working, you have left yourself with a 700usd brick...
@pavel : Hi, can you do it rework for me?
Great video as always with direct information and no messing about 🎯👍🏼
👍
I think best is to get pcmtuner dongle if you have original scanmatik 2 pro like or good/high quality clone scanmatik, at least then you know if there's any problems it is likely with the software itself and not the hardware, of course hardware can malfunction but not due to the quality of the used components in the SCANMATIK circuit
very important comparison! Great job! / I would like to see subtitles. /
👍
As usual, awesome informative content
Thanks for your help and support 👍
👍
@@YOYODiagnostic Your videos highlight the Chinese scammers who sale junk products as goods.
Thank you for letting us know how to disable the software on the firewall .
Do you need to use a 120 ohm resistor between CANH and CANL like other tools?
You can use Godiag Adapter. No resistor anymore
@@YOYODiagnostic do you recommend godiag j2534?
Hello I just bought Sm2 pro after seeing your video ! Thanks for your time to share with us ! I am curios iff you will open your device ( I did ) and let us know iff it requires rework ! Thanks
Hello , i just bought that clone BC of this vidéo , i install well but i try to work one mitshibi japjero in vain mh8304f. Please i need help to rework it
Thanks for the review. In your pro sm2 pro which board!? Green or purple!? It would be nice to see a photo of the board! Because there are different versions
Thank you for another great video!!
👍
7:21 Good afternoon, I have a question. Can PCM Flash read and write an M E 7.1.1 computer from a 2008 VW Jetta?
@@jesusdiazvalencia13 Hi. Yes but you have better options.
Thank you! PCM Tuner was biggest waste of money for me, I leanrt hard way, if you love installing windows over and over pcm is the tool.
Any ideas about PCM Master? Is it same as the one u showed in the video, or it’s some new variation? Also did you have any experience with Delphi CRD3 ECUs and this PCM?
Thanks for a video!
All are the same. Bad clone of Scanmatik
An excellent insight. Since the PCMTuner server is dead does it mean the tool will not be able to work for ecus that require VR reading, e.g. Simos 8.3
Great Video thank you so much for your great Work and expirience.
Thanks for watching 👍
Hello again sir. I must say i appreciate all the hard work you put in to inform us. I have another question and i hope you can find the time to answer or even someone else with expert skills. Am very new to tuning and i would like to know if both these tools can read Isuzu trucks(4hk1 and 4jj1 engines) Hiace minivans (2kd and 1kd engines), toyota coaster buses (no4c engines)? I plan to do dpf, egr and adblue deletes etc. Thanks in advance for your precious time
Hello,
unfortunately, I haven't tested it on Japanese cars. I don't work on these type of cars very much and when I do I use Flex which is the best for Asian cars. When I used Flex via OBD, other programmers did not have these cars in the menu.
does the scanmatk 2 clone come with a bootleg version of PCMFLash?
Another amazing video, this video made me think could the vxdiag vx se pro replace those clones?
Thanks for your support. Vxdiag can only read on OBD. Don't work for bench reading. I will post a video!
Hi Yoyo i tried both as you have here and the Plastic sm2pro is better than pcm tuner also it works out of the box and has no trojen spi software on the disk or the dongle i wish i had not baught the pcm tuner as i had to spend two days and a week to sort the burned transistors and software ,,,,,,, have you tried combi loader ??
Buenas noches el scanmatick podrá leer una pcm de un vw 2014 es una me 17.5.6?
I must say, that your lesson is the best and simple. You are really great.
I have one question. Is this simmiliar with kess and ktag?
And what software you think is the best for dpf,efr,adblue off. Thanks.
Hi
Swiftech , but it's very expensive.
thanks bro, please make a comparison video on BitBox Vs Toyota Ecu Flasher peh thanks
Thanks boss u really helps me u are my tutor, i appreciates a lot
I'm glad to hear that!
Thanks for your support. 👍
Hello, is the SM2pro clone best for hyundai Terracan 2.9 crd can it remove engine braking in TCU and upgrade engine power also....do you need to pay for each tune ? cheers Brett
how is possible for this unit to write if the FEPS is 18 v and the car use 12 v(2006 for escape)
Does the sm2 support sci-a and sci-b ?
Regedit, hklm, passthrusupport4.04 does it give sci-a 01 or 00 under the sm2 driver ?
Hello doctore, sm2 is whit arm procesor and tja1040 can or something else? Do you have pictures? Thanks a lot
Sir is this the one with the purple board with the serial number of A78370? Thanks.
Con cual proveedor me recomiendan comprar el sm2 pro gracias por su ayuda
I will soon buy this wonderful device but I don't know which model or model is better for the Middle East region... I want your advice, guys, and thank you how much
Uh what are you talking about the which how do you get rid of those viruses are the viruses only with the PCM tuner version ? I'm confused
Finally works good on EDC17cp52 Iveco over bench.
Thanks for info 🙂
Thanks for the videos, do you know if they will work with MDFlasher with their module for acdelco E37 ecm?
Hello,
unfortunately I haven't tried it and I don't want to give you wrong information.
Hi YOYO , its a usefull video as always, so we can just buy clone dongle which having pcmflash software and use it with sm2 pro clone and it would be enough, am i right ?
@@alaamohamed8802 yes
Hello, where can i order the sm2 pro j2534 clone? Becuause there are many dealers and everybody has different price and hardware version
Very nice video thanx
👍
@@YOYODiagnostic check email
What is the Trojan horse malware ransomware that my antivirus is alerting me for the pcm tuner
Yes it is true. motherfuckers try to infect PCs from users to take the data.
Thanks for hard work
@@dreece2000 👍
What can we do to get rid of the virus in software?
Great video! Can the SM2Pro be used to clone a Bosch ME9.7 ECM to a used one with the same part#?
I haven't tried this ECU with this programmer, but it shouldn't be a problem with this one.
Thanks for watching 👍
very informative mate, I do have a question though. If you are familiar with them.. how would you rate Kess / Ktag systems against sm2 pro / pcm? cheers
Kess and ktag Clone are very good for older ECUs like EDC16.
SM2 is much better for EDC17 but does not work via OBD.
If you want to buy a clone that does the job of those mentioned, go for KT200, Foxflash or Tagflash
Good review,bravo
👍
Great video mate 👌👌! In your opinion sm2 or fc200 for read/write edc17 from bmw?
Hello,
All the time FC200, for Bosch ist the best for this money.
Sm2 is a Clone , FC200 is a original product.
@@YOYODiagnostic thanks a lot for your answer. 👌👌👌
@@Daryusboy1986 👍
Good video as per usual. 👍
👍
@@YOYODiagnostic do you have a good, recommended link for purchase?
Can you post a link of where you get this good sm2 pro to buy
With my cable i have vcc or batt written on red cables, which do i use vcc or batt?
Batt for big pin output from ECU and vcc for small pin , both are 12v, one is permanent another is ignition 12v.
Can scanmatic 2 pro clone read and write EDC16 from VW group without problem?
No it doesn't work with edc16.
I noticed when you were using PCM tuner the interface selected was j2534 scanmatik - SM2 usb.
Could that be the reason the pc tuner couldn't not read flash from ecu?
I'm learning from you,let me know if that matters.
PCMtuner and SM2Pro are clones from Scanmatik. to be able to run the PCMflash software you need a Scanmatik dongle and interface, for this reason the driver used for these clones is Scanmatik.
@@YOYODiagnostic understood 👍.good explanation.
@@TemporallyHandle 👍
@@YOYODiagnostic where can i purchase scanmatik dongle and interface?
Can the SM2 Pro with my Bosch Edc17CP09? BMW X5 35d
Yes
As usual, awesome informative content ❤.
There are multiple clones of SM2 on the internet, could you perhaps help us with a link to a good clone?
Again thanks for the video and cheers 😊
Can i use SM2 Pro to downgrade my ECU software to pre-dieselgate SW? I have VW Golf TDI 1.6 … ECU model is PCR2.1
SM2 is a write and read only programmer, so you can write what you want in ECU. This PCR2.1 ECU is supported by SM2.
@@YOYODiagnostic do you know where i can find the binary files of VW softwares? what should be the extension of the file?
hi! well how to use them if all software comes with viruses? thanks!
Hello,
Thank you for the video.
What is the best tool for car ecu programming in Chinese market and original?
I am thinking to get the new Chinese kt200 is that a good investment please?
Hello,
KT200 is not something special, it does not have any extra functions compared to SM2pro for new ECU models starting with edc17. The only advantage is that it can read edc16 in Bench mode and you don't have to open them. KT 200 is equal in performance to Ktag clone + SM2 pro Clone. These cost 200 euros together and the KT 200 costs 600 euros. So a difference of 400 euros that is not justified. If the price of this programmer was 350 euros, I would recommend it, but I don't recommend it because it is expensive and works online, even if they made an offline dongle, you have to connect to their server for the first installation, so if these Chinese sellers decide to give up this programmer and shut down the server you can throw it away.
@@YOYODiagnostic Thank you for your reply.
Yes your analysis is totally right. The problem is I already bought the pcmflash the clone thr first release with metal box not the new one.
The one with that comes with 32in1 modules.
But It didn't work with as it was advertised. I remember the last time I tried was on diesel golf mk6 with edc17xx but it failed to read the ECU. Maybe because of the tprot or something else.
As many says I think my tool just need rework and upgrade the dongle to 64in1.
But I am lost I don't know what to invest in. And I am actually short in money.
My best purchase was the ktag and kess clone. They did a lot of job for me but for newer cars I don't want to take the risk without a backup tool.
@@mustaphaessahihi1762 rather than reworking that clone, you'd better buy the SM2pro clone, which costs only 140 euros, including the dongle. it is far superior to PCM Flash.
@@YOYODiagnostic thank you for your recommendation. I'll really consider that.
If you could only help me with a link to the place you got yours from I don't want to lose my money again.
The tool that I told you about cost at that time approx to 350 USD.
Hi I come again to this post.
I bought sm2pro it looks exactly like yours.
The problem is it didn't work also 😢.
I had skoda last month with 2.0 tdi engine like the one golf mk7 ecu is EDC17C64 04L 907 309 C. It failed to read it both in module 53 and 71.
Today I had q5 2011 2.0 TDI. ECU is EDC17C46 03L 906 018 MQ. it failed again to read it 😢.
So I took the ecu to another guy who have foxflash and it was able to read without problems.
Can you please share a video showing the motherboard of your SM2PRO please?
I want to compare it to mine.
where to buy the original has how to pass me a link
Does anyone know where can I can buy it from
Do you know if this works to program a 2021 f150 with fords new fdrs software?
I don't know but I don't believe.
Get the vcx nano it will do the job for you. Probably be better going with the “se” I only have the gm version and I am able to do j2534 flash with ford and gm. I can even hook it to FORScan as long as the ford is late enough model to be can bus. Can’t say enough good about them. Only thing I don’t like is it shows up as a virus and defender will turn it off or delete the program in the worst times sometimes right in the middle of a flash
hello mate i hawe issue on my pcm tuner flash sea no vci or another use can you help me out
yoyo.pc86@gmail.com
good video thanks i want you to share with us about the ucandas vdm scanner my friend is it any good
I haven't used it and I don't want to give you wrong information.
Thanks for watching.
@@YOYODiagnostic which one is better flexmaster or alientech ?
@@MrMexanik066
I use Flex master on this moment ,if you are interested I can make a Video and you will see . 👍
Can i email you ?
@@MrMexanik066
yoyo.pc86@gmail.com
Hii scanmatik does it have update
Hey there!. I will try Sm2 pro clone on edc17c46. Is the gpt1 gpt2 Adapter included in the cabel? Or i Need to Buy a Adapter to Boot this without Open?
Hello.
It's everything included 😉
@@YOYODiagnostic thanks for your quick reply :-)
the sm2 driver
if can work with tech2 or gds2
Yes it works
Does the SM2pro clone also have PinOut diagrams?
Yes, you have it on the dvd with drivers to.
@@YOYODiagnostic Do you have a link to download the pinouts? My seller did not include the DVD. I found the software but no pinouts.
@@KyleTan-jv7fk
Send me a Email
so what would you recommend of these clones? Thanks
I don't recommend using clones but if you do then buy the one that works better.
Wich one is better video is to long for me
Hi,delphi dcm 3.7 ve skoda fabia 1.2 tdi? Possible ??
These Clones cannot do this job.
Dcm 3.7 is on the list
@@j.e.g7085
did you forget we are talking about clones? The Kess V2 clone only works half of the cars that appear in the menu. In my case this ECU did not work, try it and leave a comment
Okay, ive ordered one and i will come back to you
@@YOYODiagnosticand with kess clone?
and is this pcmflash can read bosch me7.1 and me7.1.1
Exactly what would you need this for me7.1? Alot of programs for free for these
@@Pitman556 like waht free programs ?
@MHM81 nefmoto check that out online. Should work on both of those ecu.
Tuner pro is on sale for $150usd on alot of sites I want to order one I think or mpps.
Which one better ??
@@karzanmahmud4168 Scanmatick
Does it work on EDC17C41?
I didn't know. I never read this ECU with this clone.
Does this support bmw motorcycle
I don't know
Which one is best ??
@@karzanmahmud4168
I will go for FC200, it's an original product
hello how can i uninstall psc flash so that nothing is left.
I want to reinstall correctly but the files always remain
Hello
you must also delete the registry from Windows. down in search write ,, regedit,, and search until you find the PCM registry folder and give it delete.
@@YOYODiagnostic Thank you very much the tip was helpful.
Regards
@@robertszczepek8004
You are welcome. 👍
Which one is best
SM2
Can sm2 pro read ecu via obd?
only a few cars.
Is the software on dongle?
@@Salman-sc8gr no
So what is the original tool ? pcmtuner or sm2 pro ?
If they are both clones ?
What is the original ?
What are they copied off ?
I know my English is bad but you didn't pay much attention either.
Let me explain:
- pcm tunner is a clone of Scanmatik pro(SM2PRO).
- That programmer I use is called SM2pro Clone, which means that it is also a clone of Scanmatik.
So neither one nor the other is original !! The comparison was made between two clones of the original Scanmatik product. There are 2 clones on the market.
I hope I was clear enough in my explanation.
Google it and you'll see what the original Scanmatik looks like !
@@YOYODiagnostic thank you that makes much more sense. probs worth just buying the cheap clone to have as a back up.
Good
👍
@@YOYODiagnosticsalut Peugeot 307 siemens sid801 compatible ?
Hello, i've have UPA 1.3 for Simple programming, but looking for more advanced hobby works, so think about SM2Pro or Iprog. What will be better?
Hello,
I think you've misunderstood a bit how these programmers work.
If you have a little patience and watch only 3 videos from what I have you will figure out what one does and what another does.
The Tuning programmer is only Tuning and the other one is for other type of eeprom and flash.
Hello i cant get to read id, what did I do wrong, pinout is 100% right
Which one do you use ? SM2 or PCMtuner
honde compro a original
Can you send me link for where you order this SM2 pro?
I'm sorry, I'm not a seller, do a Google search and you'll find 30 companies that sell.
@@YOYODiagnostic yes i do but how did i know what is like yours. I see so many clones on the clones and dont know what to order.😂
@@w1cked1337
yoyo.pc86@gmail.com
@@YOYODiagnostic send you a email.
Bg ?
What? I don't understand?
@@YOYODiagnostic България ?
Bro , what is the difference from pcm tool and sm2pro?and which one is better to buy?
He's answered this many times in this video
Friend with the sm2 pro the laptop is also filled with viruses?
If you only install pcm flash you won't have much problems, if you install PCMtuner software it contains viruses to store information.
@@YOYODiagnostic
Actually PcmFlash is full of viruses
Mr yo-yo can you elaborate on the virus that pcm tuner comes with. Defender says it’s severe thanks for all you do
Hello , i wrote you an email can you please send me the link where i can order the sm2 pro because there are 30000 different products on the internet and i dong know which is good
Hello,
when I get to read your email I will reply. There are a lot of people who write by email, I can't be that fast because I have to work. If I respond faster on TH-cam it's because I take a break from my work and instead of smoking a cigarette I spend my time making a video or answering your comments.
@YOYODiagnostic Okey thank you very much i dont wanted to urge you, thank you for your great content , you making chiptuning more undestandable for people like me who want to learn it