You know if I had that nice shop and setup you show I'd pull the delivery trailer inside and build the shed right smack on the trailer itself. Impressive crafts and skills.
I've watched 100's of DIY buildings videos and THIS one is most inspiring. The Size and Simplicity make this the most *versatile* and *practical* design that I've ever seen. Marketing wise there's no one that you can't sell this to.
@@janonthemtn Special saws? I don't know a single man, unless they live in an apartment, that doesn't have a circular saw and a miter saw. They aren't special, they're the most basic of tools. You could easily do this with just a circular saw and those are cheap. Even a good miter saw for the average home owner / wood worker is less than $300. And if you're a home owner, that will more than pay for itself. Most people don't need a table saw; I don't even use mine, and you certainly don't need one for this build.
good for you finding a market for these as they are surely better than the ridiculously expensive plastic garbage you get at the big box stores but I'd be interested to see your cost breakdown. I built our shed (8' wide x 6' deep x 7' tall) from cedar, including a framed base with plywood floor, double doors and a shingled roof for less than $600 Canadian. It's also framed with 2x4s and all screwed together. Of course I'm not counting my labour but you can hardly buy one of those pre-cut packs for that price.
This is excellent, simple, and looks relatively inexpensive. Considering such high demand and so many subscribers (and therefore potential competitors) it is very kind of you to share this.
Many may try... but at the end of the day. Workmanship stands the test of time. Some may make it cheaper; but will probably fall apart a lot sooner too. Nice to see craftsmen at work. Remember, if it looks too easy, it's normally because your watching skill.
Yea, not seen that on other builds. I'm looking at building a 16ft x 10ft and the videos I see don't put any bracing or noggins in at all. I've had visions of me putting up the sides and then watching the shed collapse to one side like a small scaffold tower with all the bracing in one direction lol (see a brickie do that then climb on and it collapsed 😆) certainly gives more confidence in its strength.
@@dmh151076 depends where you live. When you are in a cold climate with a lot of rains you want your stuff to be more rigid because the soil under it is going to move each winter/spring.
This may be one of the best shed builds I've seen on here. U made it look simple and no help in no time. Excellent! 👏 I will subscribe looking forward to seeing more of ur work.
@@ThisTall well you can actually get a cheap circular saw, measuring tape, and drill with bits all for less than 200$. Everything else he has is just extra stuff that makes it easier, but not necessary
They are paying for the hours and hours upon hours he’s worked and increased his skill and knowledge. Same reason graphic designers are so dang expensive. Most people don’t have tools and know how to make what they want. I’m a maker, but there’s still things I’ll buy that I could have made, but sometimes you have to ask yourself...what’s your time worth?! :)
Yes, it's been a good so far, I think people are tired of those low quality kit sheds. Funny thing is that I am going to deliver two outdoor benches with this as well :)
Look forward to purchasing the metric plan and cutting list if the OP makes them available. Not many nice metric shed plans online that I have come across!
Pretty cool. At this height, I'm willing to bet you could speed up this build even further with the use of a few Gorilla work platforms in lieu of the ladder.
When you put the second piece of shiplap cladding on and it didn't go full length, I thought "why didn't he use a full length? This will be terrible!" then when you offered up the cut piece and I saw that it was tongue and groove. We don't have that in the UK, at least, i've never seen it. It seems to be much more efficient than our flat ends. I'll investigate the idea of routing a tongue and groove maybe in future although suspect it would only work well with thicker cladding boards.
Hey Dieter do you have drawn plans for this? You should set up a way to sell the plans electronically. I’m sure there are a few guys and gals in the US that would buy the plans.
I’m guessing because it only takes 2 hours for him to build it, and he sells them for $1500 at a 1200% profit. Seems a little pricey at $1500, but I suppose there’s some rich people out there that’ll pay it.
@@WBBClips I assumed it had something to do with the business side of things, I was just curious what the story was behind it. I know the margins are great on something like this. Did it come when the business was low on cash? Was he able to pump a bunch of these out and save his business/marriage/etc. Like I said, I was just curious about it, hoping it was more than just a click bait title.
He wrote in his description for the first video: "How is this changing my life? It has become one of my most popular products, and they boost my (struggling) business. It's easy to make and has a pretty good margin. It also fits in a van (coming up in part two)."
I want to build something for myself. I don't have cutting tools but this is the least of the problem. You have some serious skill i can tell. You make it look easy. How much time took you
Hi. I'd really like to know how you sealed the bits between the roof rafters in between the bird mouth cuts. You placed a board over the ends but nothing on the bottom of the overhang? I've built a tiny house before and have another project imminently. I wasn't happy with my tiny house solution to this problem and wondered what you do. Thanks for your help.
First, thank you for sharing your design, methods and work. The diagonal strips for rigidity were excellent. Good job, sir. That said, I know this is "just" a shed, not a structure that will be heated and lived in, but I would recommend anyone using exterior siding boards, like we see used here, put 2 nails at each stud, about a quarter (to a third) of the board width in from the edges. Time warp is not just science fiction, it happens to boards, too. I always follow this 2-nails rule with lap siding like this because any gaps that appear later as the wood ages and relaxes could be places for bugs to enter, and for the "wicked winds of winter" to weave their way inside. Also, it would be nice to see narration or text added to describe the main things like outer dimensions of the completed build, or of the 2x structure. Thanks! Peace and profits to you, sir!
@@logmeindangit It's wrong and it's a waste of time and nails because it has no function (and it increases the risk of cracking). Every house in Norway built with this siding (and that's many) does it this way. It's not my personal opinion, it's the building codes.
If you look at part three, he's taking apart the shed for transport. He probably finished it at the delievery-site:) I choose to believe that he used metalplates or roof shingles:) That is atleast something thats is used a lot i Norway.
I was right along with you till you had to do the roof. I don’t understand how you know what angle to cut. Is there a formula depending on the height of front wall and back wall?
I’m not sure why the diagonals are needed, although cutting them in as a nice touch. When you skin it with whatever material, it should solve any racking issues. Also, is that MDF shiplap? Is this going outside?
This is a cool product man! Good stuff this helps your business, in norway right? Here in NL mini structures are always good business, and personally they give me the most fun! Thanks!
The spacing for the studs is 24" on center which would make the shed a 4' X 8' structure and probably 6' high, which could easily be made higher if needed. A simple build for anybody that's ever built nothing more than a dog house, and his video shows how to do it as well as anything I've seen so far.
Nice shed! Sorry if I missed some info, but not sure what you mean by 1200 percent income increase. Also thumbnail says $1500. Did you build it for $1500 your cost or selling for $1500? Not sure I could even build something like that for a reasonable price in my area of the U.S. Then make much of a profit selling it. Lumber and building material costs are through the roof here. Excuse the pun. Anyway, I wish you much success. You are an excellent craftsman.
No, the purpose of nailing it like this is to make sure the board below is tight. A lot of people think that the nails should be hidden but that would result in a very weak siding. I follow the manufacturer's recommendations (and Norwegian building standards). Every house with this type of siding has it nailed like this. The roof had to be finished when mounting it at the customer's place.
That's to be sold and delivered. The owner would place the shed however they wished. On a concrete pad or foundation blocks most likely. Unless you want it all to rot, yeah, it needs a real roof and to be sealed/painted. Shingles if you want it to match your house, personally I'd just go with tin (galvanized steel roof panels) and call it a day.
Good video. Really like when TH-camrs don't add music or constant commentary throughout their videos and just show how/what they're building stuff.
Thnaks, I have music on other videos though
You know if I had that nice shop and setup you show I'd
pull the delivery trailer inside and build the shed right smack
on the trailer itself.
Impressive crafts and skills.
Good idea but it might be too tall for the shop doir
building my own shed was one of the most satisfying things i've done so far. working with wood is great.
@@SwankeyMonkey although playing with it from time to time, is also rewarding in itself...
I've watched 100's of DIY buildings videos and THIS one is most inspiring.
The Size and Simplicity make this the most *versatile* and *practical* design that I've ever seen.
Marketing wise there's no one that you can't sell this to.
He does make it look easy indeed but definitely not a weekend project for a novice. Well not at the same craftsmanship
Someoneelse Who has all those special saws? Not me. I guess you could have box store or lumber yard cut but how much is it per cut? $1??
@@janonthemtn Harbor freight has them for a reasonable price. :) You don't really have to have them, anyway. A hand saw will do.
@@janonthemtn Special saws? I don't know a single man, unless they live in an apartment, that doesn't have a circular saw and a miter saw. They aren't special, they're the most basic of tools. You could easily do this with just a circular saw and those are cheap. Even a good miter saw for the average home owner / wood worker is less than $300. And if you're a home owner, that will more than pay for itself. Most people don't need a table saw; I don't even use mine, and you certainly don't need one for this build.
@@Swearengen1980 Maybe I can try, I can measure...
Plain and simple if people are buying it then you are making something worth buying
Quality built that shed will outlast any store bought prefab shed nice work👍
I am really pleased how well this is working out for you. Congrats! Thank you also for sharing the build process videos. Very generous.
Thanks
good for you finding a market for these as they are surely better than the ridiculously expensive plastic garbage you get at the big box stores but I'd be interested to see your cost breakdown. I built our shed (8' wide x 6' deep x 7' tall) from cedar, including a framed base with plywood floor, double doors and a shingled roof for less than $600 Canadian. It's also framed with 2x4s and all screwed together. Of course I'm not counting my labour but you can hardly buy one of those pre-cut packs for that price.
This is excellent, simple, and looks relatively inexpensive. Considering such high demand and so many subscribers (and therefore potential competitors) it is very kind of you to share this.
Thanks, Most of my viewers are in the US (I'm in Norway). There might some who will try to compete, but that's ok
@@DieterSchneider thats a great outlook because not everything is a zero sum game. Great video!
Many may try... but at the end of the day. Workmanship stands the test of time. Some may make it cheaper; but will probably fall apart a lot sooner too. Nice to see craftsmen at work. Remember, if it looks too easy, it's normally because your watching skill.
that's probably the most perfect shed I have ever seen. great work!
Thank you! Cheers!
I learnt a lot from just this one video
Glad you found it helpful. Thanks!
Love the recessed cross braces.
Yea, not seen that on other builds. I'm looking at building a 16ft x 10ft and the videos I see don't put any bracing or noggins in at all. I've had visions of me putting up the sides and then watching the shed collapse to one side like a small scaffold tower with all the bracing in one direction lol (see a brickie do that then climb on and it collapsed 😆) certainly gives more confidence in its strength.
Something that small doesn’t really require to have cross braces but pretty neat that he inlayed them anyway.
Lots of sheds side sheeted with PLY or OSB. That will perform side bracing for you.
Craftsmanship
@@dmh151076 depends where you live. When you are in a cold climate with a lot of rains you want your stuff to be more rigid because the soil under it is going to move each winter/spring.
Lets just appreciate his experience 🙌🏼
This may be one of the best shed builds I've seen on here. U made it look simple and no help in no time. Excellent! 👏 I will subscribe looking forward to seeing more of ur work.
Awesome, thank you!
Keep it up my friend thanks for sharing 👍🏽 looks good
Thank you, I will
Today I learned I’ll never have the skills to build this. Good work
When you’re building a shed at 4 and you have a date at 5.
Sehr schön gemacht und so sauber und präzise ❤️👍
Wish I could get lumber that nice!
Oddly satisfying! Thanks for posting.
Fantastic build with “Great” craftsmanship.
Perfect size wood shed. Wish we saw this a month ago!
I 'saw' what you did there.
Man to thoss people knocking you for selling something so simple lol if it was so simple they wouldn't be paying you for it buddy. Looks great man
andy ruiz ..not every one builds things , that’s why people buy instead of haveing to make what it is they want, it’s easy to buy for many people.
It’s only cheap to build these if you already own every tool you need. For anyone that doesn’t, it’s literally cheaper to buy it.
@@fishmut that's basically what he was saying
@@ThisTall well you can actually get a cheap circular saw, measuring tape, and drill with bits all for less than 200$. Everything else he has is just extra stuff that makes it easier, but not necessary
They are paying for the hours and hours upon hours he’s worked and increased his skill and knowledge. Same reason graphic designers are so dang expensive. Most people don’t have tools and know how to make what they want.
I’m a maker, but there’s still things I’ll buy that I could have made, but sometimes you have to ask yourself...what’s your time worth?!
:)
You mean customers love it and it is selling like hot cakes! That is great! Maybe they would also like a nice, simple, sturdy outdoor bench.
Yes, it's been a good so far, I think people are tired of those low quality kit sheds. Funny thing is that I am going to deliver two outdoor benches with this as well :)
Awesome job, thank you for sharing.
Look forward to purchasing the metric plan and cutting list if the OP makes them available. Not many nice metric shed plans online that I have come across!
Den Beech u can convert
Amazing! Good vibes from Brazil!
Rock on!
Nice job man.
Thank you! Cheers!
great skills! learned alot! Thank You
Pretty cool. At this height, I'm willing to bet you could speed up this build even further with the use of a few Gorilla work platforms in lieu of the ladder.
I love what you do look really good I love love it thank you
Very good job..changed my life too...like it when people know their skill !! saw...🤣😂😂
Superb I love it
Thank you! Cheers!
This is oddly
satisfying to watch.
Brilliant!, Strong work.
Thank You
Well done!
Awsome build, but would have to argue that the best part was little man making his appearance.
When you put the second piece of shiplap cladding on and it didn't go full length, I thought "why didn't he use a full length? This will be terrible!" then when you offered up the cut piece and I saw that it was tongue and groove. We don't have that in the UK, at least, i've never seen it. It seems to be much more efficient than our flat ends. I'll investigate the idea of routing a tongue and groove maybe in future although suspect it would only work well with thicker cladding boards.
It works very well. These boards are only 19mm. It's probably the most popular cladding here in Norway.
@@DieterSchneider Interesting and yes I was thinking that 19mm would be the minimum. I did wonder if you had routed the ends yourself but clearly not.
Great job !!!
excellent that. very informative. I'm going to start by building a smaller version to store garden tools, lawnmower in. thank you
only a skilled carpenter can do this !
Hey Dieter do you have drawn plans for this? You should set up a way to sell the plans electronically. I’m sure there are a few guys and gals in the US that would buy the plans.
He literally has every tool in the shed.
Exactly what I was thinking. Now he has to save on construction methods.
Loving this build series, on pins now waiting for the next video 👍👍👍
Did I miss something. Were you going to put a metal roof on it?
Judging from the license plate this guy is in Poland or some other eastern European country
Norway
I had the same question. Rest of the build is great. A lot of thought gone into keeping it simple with minimal material yet structurally sound.
Great video. Just curious how it was life-changing? I loved to hear a commentary on that.
I’m guessing because it only takes 2 hours for him to build it, and he sells them for $1500 at a 1200% profit. Seems a little pricey at $1500, but I suppose there’s some rich people out there that’ll pay it.
@@WBBClips I assumed it had something to do with the business side of things, I was just curious what the story was behind it. I know the margins are great on something like this. Did it come when the business was low on cash? Was he able to pump a bunch of these out and save his business/marriage/etc. Like I said, I was just curious about it, hoping it was more than just a click bait title.
It is because he speeds up the build with fast forward, did you not see how fast he was moving!! :D
WBB Clips it says 1200% “income” increase, not profit. All he’s saying is he’s selling them so well his income has increased 12x
He wrote in his description for the first video: "How is this changing my life? It has become one of my most popular products, and they boost my (struggling) business. It's easy to make and has a pretty good margin. It also fits in a van (coming up in part two)."
Mistrz!!💪👍😎
Can you talk about costs and perhaps materials list please - PRETTY PLEASE😊
I want to build something for myself. I don't have cutting tools but this is the least of the problem. You have some serious skill i can tell. You make it look easy. How much time took you
Please make a video on your shop and tool set!
Hi. I'd really like to know how you sealed the bits between the roof rafters in between the bird mouth cuts. You placed a board over the ends but nothing on the bottom of the overhang? I've built a tiny house before and have another project imminently. I wasn't happy with my tiny house solution to this problem and wondered what you do. Thanks for your help.
First, thank you for sharing your design, methods and work. The diagonal strips for rigidity were excellent. Good job, sir.
That said, I know this is "just" a shed, not a structure that will be heated and lived in, but I would recommend anyone using exterior siding boards, like we see used here, put 2 nails at each stud, about a quarter (to a third) of the board width in from the edges. Time warp is not just science fiction, it happens to boards, too. I always follow this 2-nails rule with lap siding like this because any gaps that appear later as the wood ages and relaxes could be places for bugs to enter, and for the "wicked winds of winter" to weave their way inside.
Also, it would be nice to see narration or text added to describe the main things like outer dimensions of the completed build, or of the 2x structure. Thanks!
Peace and profits to you, sir!
Thanks for your input, but two nails in this type of siding is wrong. The building code says one, and the manufactureres says one.
@@DieterSchneider - Fine. But not "wrong" - just "more than minimally required."
@@logmeindangit It's wrong and it's a waste of time and nails because it has no function (and it increases the risk of cracking). Every house in Norway built with this siding (and that's many) does it this way. It's not my personal opinion, it's the building codes.
Very good job 👍👍👍👍👊👊
Thank you! Cheers!
Hi Dieter,
Thanks for your channel! May I ask how you will finish the roof? I mean you completed the top glance but rest of the root is just bare osb?
Great looking sturdy shed! I hope you sell a ton of them 👍👍👍
Good job! Could you give us the dimensions of the sheld, the sections of the woods you use and the types and dimensions of fixations?
Looks like it's roughly 4x8 based on the sheet of plywood he used on the roof.
That's something to what I thought, but no, Dieter said 30 sq. ft. In a comment. I don't see it, just relying. '
Nice build, thanks.
Very beautiful project
This looks fantastic! I’m curious how you transported it to it’s final destination?
Really cool project but I am wondering why sometimes you use woodscrews and other times you use nail?
some parts permanently put together with nails and other parts that can be taken apart and put back together with screws for being transported
Maybe I missed something but I don't see a cover on the roof other than plywood let me know please.
If you look at part three, he's taking apart the shed for transport. He probably finished it at the delievery-site:) I choose to believe that he used metalplates or roof shingles:) That is atleast something thats is used a lot i Norway.
Good job!
Thanks!
So what's your cost of building one of these and what are you selling them for?
That's probably 700 to 900 in materials, 1 shed ain't enough to live
I would say 400 in materials and 1600 dollars 1200% profit
The image for the video says she’d for 1500
question.
the way you built your roof, isn't the water going under the metal sheet?
I presume the drip edge will later have a metal roof applied over it.
What a great video! Do you have a list of the materials/dimensions, please? Well done and here's to another brilliant and prosperous new year for you!
What is the name of the material that you used for the sidings?
It's called shiplap
I was right along with you till you had to do the roof. I don’t understand how you know what angle to cut. Is there a formula depending on the height of front wall and back wall?
It needs to be plum, simply use a water level or hang a chalk line to mark
Nice job. What nail gun did you use.
Thanks. Hikoki framing nailer
Wow, how do you move so fast? :)
It's my super power ;)
I want to build a shed like that😍
What did you use on the roof ? i saw the aluminium edging but whats in the middle ? TIA
I’m not sure why the diagonals are needed, although cutting them in as a nice touch. When you skin it with whatever material, it should solve any racking issues. Also, is that MDF shiplap? Is this going outside?
I don't think I've ever seen a shed that wasn't installed outside 🤭
@@priestesslucy haha. Meaning is the MDF shiplap going to be facing outside. No, I don’t see a lot of MDF in an exterior setting.
This is a cool product man! Good stuff this helps your business, in norway right? Here in NL mini structures are always good business, and personally they give me the most fun! Thanks!
Jj
How do you call, the metal on the roof edge towards the end of the video!. ?
It’s great. But I don’t understand your roof on it though.
Had the same question. He explains in another comment. Flashings only temporarily fixed. Roofing fitted on site after delivery
Wow 😮 Amazing.
What keeps the roof from leaking? Doesn’t seem like metal tin around the border would do much to keep all that exposed OSB from leaking
The roof had to be finished at the customers place. I only made the metal ready, it's not attached properly.
Dieter Schneider Makes sense. Thanks for the clarification 👍
@@DieterSchneider that makes sense. Had the same concern👍
Nice. What about the roofing
Thanks, did it at the cutomers place
Hi, what is the height difference between front wall and back wall to create that Skilion roof ?
Very nice work!
Do you plans available? Or dimensions?
Yes, wondering the same thing
The spacing for the studs is 24" on center which would make the shed a 4' X 8' structure and probably 6' high, which could easily be made higher if needed.
A simple build for anybody that's ever built nothing more than a dog house, and his video shows how to do it as well as anything I've seen so far.
Larry Whalen it’s nice to have a cut list though
Can you post a parts list and your cost?
AMAZING
the price of lumber here in ohio has tripled since 2020
Interessante und großartige Arbeit. Bitte mach weiter so Vielen Dank = Interesting & Great Work. Kindly keep doing it more & more Thank you
Thank you Sir!
I got the idea now how will I build my own shed...Thanks
Sometimes costs more to make shed
To buy pre shed more less headaches
Nice shed! Sorry if I missed some info, but not sure what you mean by 1200 percent income increase. Also thumbnail says $1500. Did you build it for $1500 your cost or selling for $1500? Not sure I could even build something like that for a reasonable price in my area of the U.S. Then make much of a profit selling it. Lumber and building material costs are through the roof here. Excuse the pun. Anyway, I wish you much success. You are an excellent craftsman.
1200% income increase compared to previous month.
@dieter schnieder. What kind of van is that amd what is the model trailer you are using? Im in the market for both and that trailer looks slick!
It's a Ford Tansit Custom 2014 model
@@DieterSchneider Thanks, how about the trailer that you used to haul the materials?
0:46 is that a special measuring tape that has the line marker on the outside? Never seen one like that before. Wondering what it's called.
No, it's a regular tape measure (Hultafors)
I like it overall. Shouldnt you have hidden the nails on the shiplap siding ? What's up with the roof ? shingles ? Thanks for the video
No, the purpose of nailing it like this is to make sure the board below is tight. A lot of people think that the nails should be hidden but that would result in a very weak siding. I follow the manufacturer's recommendations (and Norwegian building standards). Every house with this type of siding has it nailed like this. The roof had to be finished when mounting it at the customer's place.
Dieter Schneider Id love the answers you give added to the description!!! You’re awesome.
Nice shop.
The roof didn't look like it was water proof?? Did I miss something?
It's the only thing that has to be finished at the customer's place. Unfortunately I don't have any footage of that.
Answer to question Keith Cooper, Demitry, Lee Bailor
13:05 that is when you need a dog or cat to come in.
Good work, nice to look at. Greetings
That dude is super fast. No wonder he's increasing his income.
Boy, you sure work fast! I need two 4’x7’. I can pay you by the hour. LOL! Seriously though, wonderful job. You gave me nice ideas.
Any time!
Does it have a raised foundation? Didn't see the build for the floor. Does it neded shingles for the roof? Does it need paint?
That's to be sold and delivered. The owner would place the shed however they wished. On a concrete pad or foundation blocks most likely. Unless you want it all to rot, yeah, it needs a real roof and to be sealed/painted. Shingles if you want it to match your house, personally I'd just go with tin (galvanized steel roof panels) and call it a day.
Und wie wird das Dach abgedichtet???
ok how did you get it outside?