It's awesome every thing is working but having one problem when all the parking slots are full the parking gate is still opening for another car. Can you explain please
@@attituden3639 you can, coding is very easy try to use this algorithm _ when sensor 1 , sensor 2 .... sensor 4 is > 300 servo should not get triggered this might help you
My SERVO MOTORS don't work :( in the procedure, if you put a finger in front of a sensor THE LIGHT TURNS ON.. but at the last the opposite happened. Why is that so?
check the connections and make sure you have connected the sensors that controllers the servo properly because i was also getting same problem and latter i came to know that it was happening because of sensor stauseef123@gmail.com
@@electro_king_official Can you send me the extra code(for lcd)please with all the exacte code for this smart parking on boybad2208@gmail.com and thank you
6 because their are on 6 analog pins on Arduino A0 to A5 and if you wish to extend than you can use Multiplexer IC and then you can connect many IR sensors
hi sir how can i output the available parking space to lcd board?
Thanks, sir. The IR sensor and led work properly for me. but the servo motor does not work. can you help me?
It's awesome every thing is working but having one problem when all the parking slots are full the parking gate is still opening for another car. Can you explain please
thank you ikram.
if you wish you can edit the code, it is opening because i have kept the code simple
@@electro_king_official but how can I edit it i mean i have little knowledge of c++
@@attituden3639
you can, coding is very easy
try to use this algorithm _ when sensor 1 , sensor 2 .... sensor 4 is > 300 servo should not get triggered
this might help you
Thanks a lot for help may you live happily
plz mujy coding dy
I want to know if the car park is full, the entry barrier will still open?
no
stauseef123@gmail.com contact me here
Hay bro
I use ir sensor
In place of led for my project
Can u help me for pogram plzz🙏🙏
hi..can i use pir motion sensor for this project?
Yes but accordingly u have to change the code
is it possible to create an apps to reserve the parking? what software will be use?
Thanks bro new subscriber, looking forward for adding like camer module to parking tutorial
thank you Rival Biasrori
i feel very proud when i get comments like this and best of luck
Can you add some of module like camera for recognition the car number and send data to database
hey...you made with camera??
Thanks for sharing. Very nice project
How do i want to know which one ir censor for crossbar
Hi Sir,
How i can connect LCD to this project?
I have sent email to you but without any response.
Sir how if I wanna make servo close before sensor count untill three ??
Please Give the code and circuit diagram to add the LCD display in it
You will find the link in the description
@@electro_king_official The given links I have checked but there nothing given about LCD display,so when will I get the link ?
@@saurabhwaghmare4249
this code is only for parking system not for LCD parking system
Very well. May god bless you.
brother dont u think ir will give digital response
Is the first servo has a relationship with the second car when entering the car and the exit of another car at the same time
stauseef123@gmail.com contact me here
My SERVO MOTORS don't work :(
in the procedure, if you put a finger in front of a sensor THE LIGHT TURNS ON.. but at the last the opposite happened. Why is that so?
Might be because of wrong connections check the connection and if it still happens then then change the logic in the code
total budget entha ayendhi
Awesome work done
Thanks bro
Can you help me add a codes for lcd?
Dear im really sorry im very busy right now i hope i could help you
Buy it is no so difficult to add lcd
Is project me LCD contact kar ke connection kaise kare.?
Congratulations! Thank You for share!
the code doesnot compile sir it shows A1 not declared in this scope
M unable to download the code ..plzz help me out sir ..
Please tell me how to add a lcd to view how many slots available?
hello my freind u do it ?
the code is not working bro i kept on getting loops on servo its always going up and down
check the connections and make sure you have connected the sensors that controllers the servo properly because i was also getting same problem and latter i came to know that it was happening because of sensor
stauseef123@gmail.com
Where from we get these products please provide me Adress
Sir can u please send code again because link is not working
how much of cost for total project..
Under 800
hi sir. sorry can i ask . why my led not working ? can sir explain
Wrong connection and have you downloaded the code from the link in the description ?
@@electro_king_official yes i have downloaded. can i know code for lcd ?
@@matanip
Sorry dear i dont have
Please send original code because that code was not working
whar is the sensor user under the car
Ir sensors
How To Trasnfer Data From Arduino To Phpmyadmin offline ????
That is totally a different topic
I connected again and again, but doesn't work
But brother i used the same code
Just let me know what output you are getting after connecting
stauseef123@gmail.com
stauseef123@gmail.com contact me here
hi sir
how we can connect LCD to this project
For that you have to write extra code
can you tell me the code please ?
stauseef123@gmail.com contact me here
@@electro_king_official Can you send me the extra code(for lcd)please with all the exacte code for this smart parking on boybad2208@gmail.com and thank you
can u please tell me your code
you will get the code and circuit diagram in the description
how many ir sensor we connect to the arduino?
6 because their are on 6 analog pins on Arduino A0 to A5 and if you wish to extend than you can use Multiplexer IC and then you can connect many IR sensors
ok👍
Sir this code not opening after downloading
Make a folder with same name as the code and then paste the code in that folder then try to open
What is the reason why jerk Cervo Motor
lose connection
How to add a screen lcd code to a project
stauseef123@gmail.com contact me here
@@electro_king_official the code is not downloading
How to add a lcd display sir
Why
Code is not working
Lose connection or improper connection
Plz send circuit diagram and code
link is in the description you can download it from their.
Not even single led is on, after that I removed one servo and two ir and recode it by using online servo motor code then it works
stauseef123@gmail.com contact me here
Sir programming is not run
What problem you have encountered ?
Sir i sended mail for u. Please contact me...
Code is not working
Lose connection or improper connection
stauseef123@gmail.com contact me here