@@adamysterio67 If you pay attention you will see that the base on which the matherbort rests is warped. On the central screw facing the front of the case, there is a difference of more than 1.5 mm and the screw below a difference of 1 mm. This causes the matherboard to warp when tightening the screws. What a big mistake by Panteks NV5, this case has poor quality control. The most serious thing is that you damage the matherboard. I had to compensate for the unevenness of my case, with washers, just so the mtherboard remained level. Very bad.
I love this design because most fish tank cases and pc cases in general edge you towards using a 3 in 4 out fan config, unless you want the back fan to be in. Which often times lowers performance compared to a 4 in 3 out config and even just 4 in 4 out. Love to see a case manufacturer innovating which isn’t done much these days other than the glass on dual chamber cases. Correct me if I’m wrong though.
Great to see you cover this case, so soon. I would very much recommend you do another build with this in the future but showcase the additions the case has. 1. The Premium Vertiical GPU mount 2. Additional RGB (not in stock anywhere at present). What I will say is, having built one in black and using Corsair's latest additions with iCue Link AIO and QX fans. They are a high price but I have to say they look amazing and are prebuilt as well as so easy to install. Its also very easy to use the case buttons to select a colour for the cases own RGB and then partner that with various presets for the AIO/FANS/RAM.
Nice case, but it will be as or more expensive than a Fractal Torrent by the time you buy all the fans. (assuming you buy premium rgb fans) I'm thinking about the Lian Li 216, which includes the fans. The main feature for me is mounting a 360 AIO to the top, and still having airflow fans for the case.
Great video! I have got those 120mm fans sitting on my desk waiting on other parts for my new build :) Ordered this case just now too looks great and cant wait to build it! Thanks!
just built a new system in this case along with the d30 fans and glacierd30 aio and it is such an amazing case and very easy to work with! also a quick note of the gpu bracket- it can be extended out so it hugs the gpu not just hold it
I've seen multiple builds where people don't extend the GPU bracket. It's got the foam pads so you can tell it's made to be extended. I know I did with mine
@@Fredsinator I’ve seen the same, I didn’t need the bracket with my new 7800xt as it just came short so i took it out but kept for future upgrades, plenty of space for when even bigger cards come out
Hello James, can I ask you please, I'm looking to buy this case, my current case is ugly and a bit old, but very good and silent, BeQuiet 900 rev2, but I don't need such a big case, so my question is is the NV5 good when it comes to sound? doesn't have to be dead silent, but not loud or noisy, my only big/noisy thing is that I have an RTX 3080 12 Gig Aorus master, what do you think? Thank you
That... isn't how the GPU bracket is supposed to be used.. it can go wider and be raised higher to actually cradle the GPU and not just support weight on the widest point, becoming a potential point of failure and breaking or bending. RTFM
it makes me feel so much better about myself when a lot of these big PC guys go to power up a PC and have it not start or display out when I've only done 4 PC builds in my life and every one went flawlessly haha. Granted, i also spend anywhere from 4-7 hours on each build triple checking each and every component to make sure there's zero problems before the golden moment while these guys can probably whip one out in 45-60 minutes.....
Marcus I think you should float this idea to some of the manufacturers regarding the HD Audio cable showing the ugly colours. All they have to do during the wiring process is slip over a heat shrink shroud then once the connector is complete just apply some heat from a heat gun and the shroud will shrink completely covering the coloured cables leaving a clean finish. I am a marine electrician and use this process in work everyday.
PC looks FANtastic...I'm looking forward to a follow-up on the issue with the motherboard. I have this in my cart ready to check out but I want to know the main issue and fix before I commit.
شباب عندي مشكله في البي سي . ابغا ابدل بين مصدر الصوت بين الشاشه و السماعة من الكيبورد ب الختصار بدون ما اطلع من اللعبه واخش ايقونه الصوت في شريط الويندوز.
The recommended RAM for this build on the Amazon store front is CMP64GX5M2B6000C30W. I looked up the motherboard RAM compatibility list and this RAM is not on it. Can anyone confirm this RAM works with this motherboard?
QVL lists aren't a set in stone list of compatibility, it just means the mobo manufacturer tested those specific kits and got advertised speeds - they can't test every kit on the market. I use the same RAM SKU for my board which also isn't on the QVL list and get 6000 mhz on my EXPO/XMP speeds just fine. AM5 boards aren't as picky with RAM as AM4 used to be so you should be all set.
That sounds like you pinched a cable somewhere, maybe an RGB or a fan cable is sending some power into the case. If it was truly a design flaw that would be catastrophic.
If you pay attention you will see that the base on which the matherbort rests is warped. On the central screw facing the front of the case, there is a difference of more than 1.5 mm and the screw below a difference of 1 mm. This causes the matherboard to warp when tightening the screws. What a big mistake by Panteks NV5, this case has poor quality control. The most serious thing is that you damage the matherboard. I had to compensate for the unevenness of my case, with washers, just so the mtherboard remained level. Very bad.
This sounds silly, but is that singular fan at the bottom a necessity? As I'd rather have a pop or something in that space but dont want to compromise performance.
Great content, I would love to see the very best gaming PC for under £1500. Maybe prebuilt versus DIY build & just how much better the spec if building your own? If I’ve missed something similar that’s fairly recent, please can someone point me in the right direction. Thank you.
Can you buy a GPU cable for corsair power supplies like yours? I've got the RM850x but the cable for the GPU doesn't fit properly below the motherboard.
Just over $2500 USD $219.99 -motherboard $324.99- CPU $254.99- CPU cooler $119.39- RAM (vengeance 32gb 6000mt/s) $129.99- 2tb storage $958.99- GPU $99.99- Case $219.99- power supply $180- 2x 3 packs of fans (AF120 elite whites) $2503.30- Total (From PC part picker)
so the H150i comes already with a iCUE Commander. What did you use the extra LED Hub for in this case? I wanna make this exact iCUE and NV5 combo and i wish to know if i need to buy a LED Hub as well.
A motherboard for an i7 14700k, I don't need the OC + 4070ti, 9 argb fans, 1000w power supply? Different from the Z790 series. Help me, all I need is the motherboard to complete the setup. Thanks
The 360 fan spot at the back of the case the hole at the back is triggering obviously it won’t be there with back panel but just knowing it’s there is annoying
Do people ever use air coolers for these? i love how the case looks but i dont care for watercooled CPUs, but the sideways fans seem.. bad? for normal air-cooling a CPU...
if air cooling would have 3 intakes side, intake at bottom and aircooler with one exhaust at back..leave top empty...will put positive air pressure in case and with air cooler and exhaust fan get the hottest air moving out of the case...the positive airpressure should do the rest
Ooh 👀 now that is pretty! I am moving next month and I was on the fence on what to do to upgrade. I am struggling on where to put a high end rig. I would love a small but powerful rig to put in the main living space and maybe turn the old rig into a plex server but I am not tech savvy whatsoever 🤣 the old computer was my cousins PC. This PC looks amazing though! I love the all white builds they're pretty!
Hi I’ve been seriously considering switching to PC gaming I just have a few questions, I’ve heard you can still have access to xbox game pass on pc? Also I love some of the play station exclusives such as zero horizon dawn, ghost of Tsushima and the new KOTOR remake is said to come out on play station. Rn I have Xbox and PlayStation which is pretty expensive lol so I guess what I’m asking is can I still play all the games I love on pc or will I still need two consoles? I would appreciate any information you can share.
Yes, Gamepass works on PC. But seriously consider the switch. I have never been a console gamer, but its hard to recommend PC parts right now. Price to performance levels are terrible.
hi PC CENTRIC,this is a bit irrelevant to your current video but i saw one the other day and i cant decide whether to buy the samsung oled g8 or neo g8 the one thing that puts me down on the oled is 1440p and a risk of burn in Im using amd7900xtx
18:35 please sir can you please elaborate more about what actually happened? Imagine if that happens to me 😢 loosening the screws seems strange
+1 (happening to me right now, need help)
@@adamysterio67 If you pay attention you will see that the base on which the matherbort rests is warped. On the central screw facing the front of the case, there is a difference of more than 1.5 mm and the screw below a difference of 1 mm. This causes the matherboard to warp when tightening the screws. What a big mistake by Panteks NV5, this case has poor quality control. The most serious thing is that you damage the matherboard. I had to compensate for the unevenness of my case, with washers, just so the mtherboard remained level. Very bad.
@@adamysterio67did you fix it? I really want this case but now I’m scared
amazing video (it came out 35 seconds ago)
amazing video (i came 35 seconds ago)
The video came out 4hrs ago 😁
@@skellig5867video came out 3 weeks ago 😆
@@skellig58674 months ago
@sql64 you CAME or you came?☠️ You know what I'm saying right?☠️
I love this design because most fish tank cases and pc cases in general edge you towards using a 3 in 4 out fan config, unless you want the back fan to be in. Which often times lowers performance compared to a 4 in 3 out config and even just 4 in 4 out. Love to see a case manufacturer innovating which isn’t done much these days other than the glass on dual chamber cases. Correct me if I’m wrong though.
This is honestly the best looking pc you’ve ever built ❤
Thanks!
Great to see you cover this case, so soon. I would very much recommend you do another build with this in the future but showcase the additions the case has.
1. The Premium Vertiical GPU mount
2. Additional RGB (not in stock anywhere at present). What I will say is, having built one in black and using Corsair's latest additions with iCue Link AIO and QX fans.
They are a high price but I have to say they look amazing and are prebuilt as well as so easy to install. Its also very easy to use the case buttons to select a colour for the cases own RGB and then partner that with various presets for the AIO/FANS/RAM.
Where do you get your iCue Link AiO?
Does the qx120 fans get very loud at max rpm like ppl have been saying??? @Mr_Latte_UK
Nice case, but it will be as or more expensive than a Fractal Torrent by the time you buy all the fans. (assuming you buy premium rgb fans) I'm thinking about the Lian Li 216, which includes the fans. The main feature for me is mounting a 360 AIO to the top, and still having airflow fans for the case.
Definetly go with the Lian li 216 its is better.
I have a lian li 216 its awesome air flow is godly
Just chiming in with another vote for the 216. Recently built in one, and my vertically mounted 7900xtx has been super cool and quiet in it.
Great video! I have got those 120mm fans sitting on my desk waiting on other parts for my new build :) Ordered this case just now too looks great and cant wait to build it! Thanks!
what are the name of the fans?
Another great job, just watching the instal makes things make sense. keep up great work
Very tempted to buy this. Went with the NZXT H9 flow instead, I wanted the psu shroud out of sight completely this time round. Great video as always.
One or two wraps of white electrical tape would take care of those ketchup and mustard wires showing.
I have this case and for me is the best case ever and the price is really fair.
I bought one and I LOVE IT, the only thing is, I don't have any fans other than on my radiator
just built a new system in this case along with the d30 fans and glacierd30 aio and it is such an amazing case and very easy to work with! also a quick note of the gpu bracket- it can be extended out so it hugs the gpu not just hold it
I've seen multiple builds where people don't extend the GPU bracket. It's got the foam pads so you can tell it's made to be extended. I know I did with mine
@@Fredsinator I’ve seen the same, I didn’t need the bracket with my new 7800xt as it just came short so i took it out but kept for future upgrades, plenty of space for when even bigger cards come out
I have the black and will be installing the Premium vertical GPU mount soon, it might look even nicer with this and certain cards
@@Fredsinator
@@Mr_Latte_UK yes, I saw one of the Phanteks subreddit and the premium GPU mount looks really good, especially with the light strip
Hello James, can I ask you please, I'm looking to buy this case, my current case is ugly and a bit old, but very good and silent, BeQuiet 900 rev2, but I don't need such a big case, so my question is is the NV5 good when it comes to sound? doesn't have to be dead silent, but not loud or noisy, my only big/noisy thing is that I have an RTX 3080 12 Gig Aorus master, what do you think? Thank you
That... isn't how the GPU bracket is supposed to be used.. it can go wider and be raised higher to actually cradle the GPU and not just support weight on the widest point, becoming a potential point of failure and breaking or bending. RTFM
Pc Centric a Legend, always delivers and never disappoints 👍🏻
awesome video marcus!!
Such a good looking, clean build!
The GPU support bracket is supposed to “brace” the GPU. You have it sitting on the tip holding it up and that’s the incorrect method.
it makes me feel so much better about myself when a lot of these big PC guys go to power up a PC and have it not start or display out when I've only done 4 PC builds in my life and every one went flawlessly haha. Granted, i also spend anywhere from 4-7 hours on each build triple checking each and every component to make sure there's zero problems before the golden moment while these guys can probably whip one out in 45-60 minutes.....
Marcus I think you should float this idea to some of the manufacturers regarding the HD Audio cable showing the ugly colours. All they have to do during the wiring process is slip over a heat shrink shroud then once the connector is complete just apply some heat from a heat gun and the shroud will shrink completely covering the coloured cables leaving a clean finish. I am a marine electrician and use this process in work everyday.
So what was the issue with the mother board ??? or the Rig? Why did not start?
I just love how generously interested he is in his videos. It's just great
Always dead exited when a pc centric video comes out
Nice! I get mine this week.
“Ketchup and mustard cables. Gets a SOLID shake of the head.” HILARIOUS like always 😂😂😂😂😂
@pc centric any update on the standoffs/ screws in the mother board?
The builds are amazing and this build white case 😮💨😮💨 and the thumbnail is cool
i have the black version of this case and its amazing
PC looks FANtastic...I'm looking forward to a follow-up on the issue with the motherboard. I have this in my cart ready to check out but I want to know the main issue and fix before I commit.
Same
Did you ever get the case? How was it
Your brains goes fast as these which is insane good job.
Did you found out, whats the problem was with the case and motherboard? I'm asking, because i have the same problem.
Same
Sam problem here…
How did you fix it?
@@stephenchisam4267did you ever fix?
In my case it was a defect in the power supply.
“Stop what you’re doing“.
Me, literally ordering a new PC case at that moment: “OK”
As much as I don't like the pricing on Corsair's iCue Link when you look at what you had to go through with this setup it makes sense.
Pc centric, pls do a GT502 build. Flawless case, just like this one
شباب عندي مشكله في البي سي . ابغا ابدل بين مصدر الصوت بين الشاشه و السماعة من الكيبورد ب الختصار بدون ما اطلع من اللعبه واخش ايقونه الصوت في شريط الويندوز.
Keep it up ❤
The recommended RAM for this build on the Amazon store front is CMP64GX5M2B6000C30W. I looked up the motherboard RAM compatibility list and this RAM is not on it. Can anyone confirm this RAM works with this motherboard?
QVL lists aren't a set in stone list of compatibility, it just means the mobo manufacturer tested those specific kits and got advertised speeds - they can't test every kit on the market. I use the same RAM SKU for my board which also isn't on the QVL list and get 6000 mhz on my EXPO/XMP speeds just fine. AM5 boards aren't as picky with RAM as AM4 used to be so you should be all set.
That sounds like you pinched a cable somewhere, maybe an RGB or a fan cable is sending some power into the case. If it was truly a design flaw that would be catastrophic.
This is probably the best case for the cost tbh
It’s Phantastik!
If you pay attention you will see that the base on which the matherbort rests is warped. On the central screw facing the front of the case, there is a difference of more than 1.5 mm and the screw below a difference of 1 mm. This causes the matherboard to warp when tightening the screws. What a big mistake by Panteks NV5, this case has poor quality control. The most serious thing is that you damage the matherboard. I had to compensate for the unevenness of my case, with washers, just so the mtherboard remained level. Very bad.
that is the BEST LOOKING RAM kit I have ever seen ❤
Its the new Titanium Dominator / White or Grey for EXPO kits
Sweet a fishtank case that shows off your pretty looking build!
I'm gonna put noctua fans in it. 😏
i dont think you provided a link for the optional RGB kit. i was really hoping to pick one up but I cant find links anywhere
Marcus, whats the point of that HD audio connection if the case IO only has 2 usb As and a usb C @5:30? No front IO audio jacks
It's a shame the pump cable to rad could be made, which are hidden through the motherboard and then hidden.
If you know what I mean
For this case our with the Phanteks fans with the reversible ones cos they look awesome works
Out to be about 200 quid
Yo love your videos man keep the good work❤
Can i use 400mm aio nucleus d360 lux in this case???
360mm maximum (3x120)
@@kevindhaussy3042 it's not a true mate. Easy 400mm on the top in this case :) ive got nucleus d360 on this case , size 400mm. Looks great.
Best looking case
I wish this case was released when I built my PC
Yet again, amazing. Can I ask what you do with the modded case. Do you sell them.. asking for a friend 😮
@pccentric what was problem after as iv just bought this case. And building on weekend 😊
Still not sure, think it was maybe a stand off not in the right position
@@PcCentricdid you ever figure it out?
Where's the link to the extra RGB lights for the case?
This sounds silly, but is that singular fan at the bottom a necessity? As I'd rather have a pop or something in that space but dont want to compromise performance.
What do you think about antec c3? You think nv5 is better?
Do you prefer this or antec c3?
where did you get the fan controllers? or did they come with your fans?
You are right. For example t30 is the best fan...THE BEST
How would you go about syncing the case rgbs with the corsair fan rgbs?
What is the difference between the NV5 and the P600 and which is better? thanks.
Great content, I would love to see the very best gaming PC for under £1500. Maybe prebuilt versus DIY build & just how much better the spec if building your own? If I’ve missed something similar that’s fairly recent, please can someone point me in the right direction. Thank you.
If the Montech King 95 doesnt release in the next few weeks i gonna go for the Phanteks NV5.
Can you buy a GPU cable for corsair power supplies like yours? I've got the RM850x but the cable for the GPU doesn't fit properly below the motherboard.
does this case have USB ports anywhere?
how did you disable the RGB light strip that's on the case?
I will not stop what I am doing.. because I am watching this video!😂
do i need that exact power supply and 4070 ti if i want to make this build? because i cant find those exact ones anywhere
where are the storage drives in this build?
the link to your mousemat never opens , is there a problem with the link ???? been trying to get hold of one of these for ages .
how do I change the RGB light bar on the slant inside the case? so I can make a full single color theme
Plug the led strip in the controller then plug the controller in your motherboard. Be careful, the led strip cable is really short.
Is it possible to mount vertical gpu holder on that case if we imagine the phanteks holders doesn't exist? Thanks!
How much would this cost in total?
Just over $2500 USD
$219.99 -motherboard
$324.99- CPU
$254.99- CPU cooler
$119.39- RAM (vengeance 32gb 6000mt/s)
$129.99- 2tb storage
$958.99- GPU
$99.99- Case
$219.99- power supply
$180- 2x 3 packs of fans (AF120 elite whites)
$2503.30- Total (From PC part picker)
so the H150i comes already with a iCUE Commander. What did you use the extra LED Hub for in this case? I wanna make this exact iCUE and NV5 combo and i wish to know if i need to buy a LED Hub as well.
W Case Phanteks!
A motherboard for an i7 14700k, I don't need the OC + 4070ti, 9 argb fans, 1000w power supply? Different from the Z790 series. Help me, all I need is the motherboard to complete the setup. Thanks
You will need a Z serie for this cpu, it heats so much on a B serie motherboard.
@@kevindhaussy3042 thanks
that end of the video here 6:15 got me
I don't know anything about pc. But i think i like this build. 😁✌️
I have the same case and i have a problem. The Light bar which is placed at the Power supply doesn't work on my build. Any help?
Like I said on a previous comment : plug the led strip in a controller and plug it to your motherboard.
I have a question, I really like the Corsair D7000, but I feel like its going to be huge, so would you recomened it or should I just go for the D5000?
Just go 5000D if you don’t need the space. Even the 4000D is nice if you don’t need room for a bigger graphics card.
"Now smile to the camera monitor, or I'm shivving you with this screwdriver"😃
Can i put a 3.5" HDD on the bottom instead of the fan?
I put a 1 tb hdd on mine don't know the inches tho
Lian Li's XL case is my safe place
Can you do a complete build with a Ryzen 9 7900x with this case please. I plan to buy this case and my first time building a pc.
Should of used the Phanteks D30 fans. They look so much better.
Oooo that case i beautiful 🤩
Finally, a fish tank case that I can actually afford
Montech sky two is awesome too
What was the problem then? Anyone know?
IDK i didnt see any notes explaining it
The 360 fan spot at the back of the case the hole at the back is triggering obviously it won’t be there with back panel but just knowing it’s there is annoying
But the nv5 is one of my favourite cases
Do people ever use air coolers for these? i love how the case looks but i dont care for watercooled CPUs, but the sideways fans seem.. bad? for normal air-cooling a CPU...
if air cooling would have 3 intakes side, intake at bottom and aircooler with one exhaust at back..leave top empty...will put positive air pressure in case and with air cooler and exhaust fan get the hottest air moving out of the case...the positive airpressure should do the rest
Centric what case would you recomend for an rtx 4070 amongst the Phanteks NV5, H5 Flow & Lian Li Lancool 215?
Still waiting for the Lian li o11 vision and evo rgb do you got any idea when it’s going to release
Wondering if it can fit my huge 1200W powersupply, literally it won't fit in my current case, so it's on my desk.
Ooh 👀 now that is pretty! I am moving next month and I was on the fence on what to do to upgrade. I am struggling on where to put a high end rig. I would love a small but powerful rig to put in the main living space and maybe turn the old rig into a plex server but I am not tech savvy whatsoever 🤣 the old computer was my cousins PC. This PC looks amazing though! I love the all white builds they're pretty!
Can anyone tell me how much that pc costs?
Beautiful case and not expensive, but can you install the asrock b650e taichi lite, I'm to use the taichi for my new upgrade.
Hi I’ve been seriously considering switching to PC gaming I just have a few questions, I’ve heard you can still have access to xbox game pass on pc? Also I love some of the play station exclusives such as zero horizon dawn, ghost of Tsushima and the new KOTOR remake is said to come out on play station. Rn I have Xbox and PlayStation which is pretty expensive lol so I guess what I’m asking is can I still play all the games I love on pc or will I still need two consoles? I would appreciate any information you can share.
Yes, Gamepass works on PC.
But seriously consider the switch. I have never been a console gamer, but its hard to recommend PC parts right now. Price to performance levels are terrible.
As a guy with 12TB, i need more hdd mounts in the back.
hi PC CENTRIC,this is a bit irrelevant to your current video but i saw one the other day
and i cant decide whether to buy the samsung oled g8 or neo g8 the one thing that puts me down on the oled is 1440p and a risk of burn in
Im using amd7900xtx
Avoid the OLED hype for now. Burn in is still real and it will happen, no matter what you do.