I think he is just bad at working under pressure. If he was taking his time he would have read the bottles and found out that it was power steering fluid but he just had a quick glance and took a chance on it and threw it in. Maybe he should have noticed that it was so thin when he was pouring it but I guess he was just rushing for the video.
That oil filter needs to be torqued to spec, they are supposed to be tighter than your normal oil filter. If it hand tight it can vibrate loose and leak oil everywhere.
You can get a special socket for them and its a lot easier to remove it and put it back … hand tight ?? Never seen that before but thats wfont need to be really tight
For the rusted exhaust manifold you can use "stove polish" (I think its called...) in Swedish it is "Spissvärta". Its like shoe polish but for cast iron stoves, makes them black and takes the heat. I have used this on many cast iron exhaust manifolds. God Bless !
Yesss many people don't know about this and spraying the underneath of your car with fluid film so your car doesn't rust in the winter as bad it saves cars and living in the north I'm surprised I do see more people talking about it. And it's the same stuff the navy used on there ships
@@undercoverwhale6891 fluid film and Krown is what we use local to me. Every crack and crevice gets sprayed. Makes our cars last a quarter as long as Florida instead of a 1/8th lol
MORE GRANT!!! Everyone's videos are better with him in it. Your's, lz's, and tommy's. Lets see more of his drift car too thing is so clean. Bring him to the next track outing.
Love grant as well but his ls bmw isn’t clean. It’s a drift car. Takes a ton of abuse and gets beat up. But it’s deff a solid car and rips. Maybe my so clean is diff tho haha. I think lz’s r34 or one of Tommy’s restored skylines when I think so clean lol
Chris make sure you tell Will to put a new o ring on the oil filter housing and to put some fresh oil on the o ring so it will be easier to get off next service.
@@derekg2132 yea Automatic Trans fluid and power steering fluid are the same generally. But Gear oil for manual transmissions is waaay different, the oil is thicker.
Make sure you replace that belt again when you clean that up, the oil degrades the belt rubber causing it to slip eventually and if you dont have the crank seal guard on there the motor will eat it. Happy for Will that it actually started..
Finally some 135 action again 😁 but fyi. You should always connect chargers and boosters on the conection points in the enginebay on Bmws, because there is a failsafe on them and if you dont your ibc wount know that you charged the battery and can start making issues 😅
Last video I said “I wouldn’t let little Willy change the oil on my car”, and so many butt hurts got mad at me. This dude puts power steering fluid in his transmission the very next video lol. That shit was so funny…
Man i wanna see chris reach a million he so deserve it, man and he sure don’t ask for much but I’ll ask it from Everyone he came along ways and still making it from haggard 💯🙌🏾
Rudnik, moving back to CT was the best decision you made. Love the Florida crew but the content with you, Will, Tommy, Grant, LZ is on another level. Keep grindin guys!!
Finally some content on the 135i. One of the best videos IMHO. Keep pushing, Will. Know that feeling. As I changed the Oilfilter housing gaskets on my N52, I cracket the freakin housing, because the steal bolt and the aliminum housing coroded and baked up the threads, sooo... 3 freakin bolts and I still manageddo destroy stuff!
running without coolant heats up cylinder walls fast since obviously in liquid cooled engine there suppose to be coolant behind "thin" wall transferring heat away, also temp gauge does not really work since there isn't anything to transfer heat to sensor.
Thanks for making winter in the Northeast US bearable right now. Shitty weather with salt on the roads means no cruising around or raging corners on backroads. Its depressing but all your guys' videos help out big time.
Stoked for will. It’s a learning curve and at least he got some serious hands on work. BMW engines are pretty complicated and hard to work on without using oem tools. Just glad rudnik and many others helped will to get the parts and tools. Without them the engine would’ve been done at start up.
The old oil filter was crushed which meant he had the wrong one in there originally, it was too tall and thats why he had to use a wrench to get it to seat.
You should check dme codes in ignition setting before trying to start the car. It’ll tell you any errors you have…be able to tell if have sensors unplugged, plugged/swapped to wrongs place etc…
will you need to make that oil filter tighter, I've worked at a BMW dealer for 6 years, and it uses a specific tool to tighten/loosen it and you usually tighten it to about 13-23nm I think its 12-17 ft lbs
This video was so good I'm watching a 2nd time lol. I still can't believe Willy filled the trans with Ps fluid. Lmao I'm dead. Mistakes happen bro. Huge congrats on the car running again!
At least it started! Pretty sure charge pipe is not mounted on all the way u need to pull/push the charge pipe towards the manifold harder and the clip will click into place. And u do want to tighten that oil filter housing cap tighter with the tool, it should not just be hand tight. Will cracks me up man!! Almost there dude!! Get all that oil off the belt u don’t want that slippin off!
Bruh lmfao the moment 😂 🤣 the engine started and then bam an ad comes and you gotta wait little to skip it never fails when your Watching a vid and your into it.
MaN I swear I was as nervous for Will as he was nervous for his engine blowing up 😂 like glad it started and all but the true test is getting it on the road
Imagine the productivity if you had a 3rd person to keep on top of back ground stuff, from cleaning to keeping batteries charged. That would increase your video quality I think
I had a hard time buying the o ring for the charge pipe good luck! They want you to buy a whole charge pipe assembly. The aftermarket one you have with the bov needs the o ring from the oem.
You didn't throw the links to FCP in the description :) Honestly though, big ups to Will and everyone else who helped make this happen for him. That first startup is always so gd nerve wracking.
The open oil cooler connections aren’t a big deal if just a few seconds on idle. If you drain the oil in the engine you will find you spit out less than a qt. I’ve done this before on an E36 w/ loose vanos oil line. Low oil pressure and oil spitting out of top side of vanos oil line. I was freaked but It’s not nearly as bad as might think.
Sooo fuxking stoked for you Will !! You put in the work and did it all your self. Yeah you made some fuck ups but that’s part of learning. Proud of you man
You're missing the o-ring on the charge pipe.. You will have a massive boost leak with out it. his is why it's loose on the throttle body.
+1 on this
Rudnik will read this
second this, I work on bmws, a lot of n54s and can confirm
Bump
Yep... good old BMW quick clip plastic couplers always use new O-rings!
I fucking died from laughter when they realized that Will put the powersteering fluid instead of gearbox oil in the trans :DDDD
Same lmfao 😭💀
I fucking live for the will, Tommy, and rod knock content lmfao. Tommy laughing in will’s face in the beginning had me losing my shit LOL
LMAO soo gooood
That laugh definitely had me crying!
I about pissed myself 😅😅
When the fake laugh turned into a real laugh 🤣🤣🤣
It's hilarious. Loving it.
Will is literally the least prepared person I’ve ever seen lol love that guy but dang. Happy nothing was damaged. I just want to see him win once.
I think he is just bad at working under pressure. If he was taking his time he would have read the bottles and found out that it was power steering fluid but he just had a quick glance and took a chance on it and threw it in. Maybe he should have noticed that it was so thin when he was pouring it but I guess he was just rushing for the video.
My god, I've waited so long for this.
Right dude I wanna see wills face when he does the first pull lol
Could have ls swapped it by now
Same
@@undercoverwhale6891 could have done any swap known to man by now lol
@@undercoverwhale6891 that ain't any fun
That oil filter needs to be torqued to spec, they are supposed to be tighter than your normal oil filter. If it hand tight it can vibrate loose and leak oil everywhere.
And they are hard as fuck to get threaded Will aint crazy. At least on the older bmws you could use a 36mm
Correct, hopefully they see this
need to be lightned to 25Nm
You can get a special socket for them and its a lot easier to remove it and put it back … hand tight ?? Never seen that before but thats wfont need to be really tight
That’s why some cartridge filter housings have a 22/23mm 6-point nut head on the lid
Grant: “That was a weird move Will” 😂😂😂😂
Imagine if Grant was there for oil spray 22:19
@@StrangeRealityVlog 🤣🤣🤣
😂😂😂😂
15:15 "I'm sorry to myself" Same Willy, Same.
For the rusted exhaust manifold you can use "stove polish" (I think its called...) in Swedish it is "Spissvärta". Its like shoe polish but for cast iron stoves, makes them black and takes the heat. I have used this on many cast iron exhaust manifolds. God Bless !
✅✅
Nice, I never though about that!
it think barkeepers friend is the same thing
Yesss many people don't know about this and spraying the underneath of your car with fluid film so your car doesn't rust in the winter as bad it saves cars and living in the north I'm surprised I do see more people talking about it. And it's the same stuff the navy used on there ships
@@undercoverwhale6891 fluid film and Krown is what we use local to me. Every crack and crevice gets sprayed. Makes our cars last a quarter as long as Florida instead of a 1/8th lol
Since it's direct injection you guys should replace the pcv and put a catchan on to try and keep those intake valves clean as long as possible
What's a catchan 😂
@@unfknknown9678 i think its one of them pokemon things
@@shifty1927 oh rodger that 😂
@@shifty1927 bruh💀🤣
You mean replace the valve cover?
THE OIL COOLER! XD Wills face when he heard stop was so worth it.
Literally priceless 22:19
@@StrangeRealityVlog thats a meme right there
Me and my brother were just waiting for it to happen It was so funny
MORE GRANT!!! Everyone's videos are better with him in it. Your's, lz's, and tommy's. Lets see more of his drift car too thing is so clean. Bring him to the next track outing.
I agree, grant is such a good dude
Love grant as well but his ls bmw isn’t clean. It’s a drift car. Takes a ton of abuse and gets beat up. But it’s deff a solid car and rips. Maybe my so clean is diff tho haha. I think lz’s r34 or one of Tommy’s restored skylines when I think so clean lol
@@annadarby7224 it’s a diff type of clean. The execution of the build is what I meant not ascetically.
Chris make sure you tell Will to put a new o ring on the oil filter housing and to put some fresh oil on the o ring so it will be easier to get off next service.
That oil pissing everywhere was the best payoff after waiting so long for the first start 🤣🤣🤣🤣
Bro I was crying 🤣🤣😭😭😭😭😭😭
Literally Priceless !! Can you imagine if Grant was there...
Putting power steering fluid in the trans was just as good lol. Never seen either of those happen before lol
Will is such a good dude. Love seeing the bond you, Will, Grant and Tommy have. Legit content. Moving back was the best move you’ve made Ruddy.
And Sammit !!
Will putting power steering fluid in his trans killed me 💀
Idk about BMW but Ford and Honda other cars older cars its the same you use red tranny fluid for both
And thats why I dont bring my car to dealerships to get a service haha
@@derekg2132 yea Automatic Trans fluid and power steering fluid are the same generally.
But Gear oil for manual transmissions is waaay different, the oil is thicker.
Honestly he was most likely super nervous and knew he was about to start it for the first time, so he ended up making silly mistakes, shit happens.
@@derekg2132 Correct, but in this case, the power steering fluid was actual power steering fluid, not ATF like those cars call for
I'm nervous for Willy I am seriously hoping for the best though!
😞my cardne asada burrito has a bone in it bru
@@carnalescarclub154 bruh pull it the fuck out and EAT THAT THANG
hey we're the same guy
Right I wish Chris would have helped him more and kept more an eye on what Will was doing so it would go back together right
@@coreycrosswhite8890 I agree him and papa tom threw him to the wolves to fend for himself
Not even a minute in chris and tommy fighting 🤣🤣
Grant out here teaching you guys lessons he learned the hard way. What a G
Make sure you replace that belt again when you clean that up, the oil degrades the belt rubber causing it to slip eventually and if you dont have the crank seal guard on there the motor will eat it. Happy for Will that it actually started..
Gotta thank tommy, without all the sh*t he says maybe that thing wouldn't be running, defenetly gives you a reason to persevere
Lol. Tommy is the only reason they took it apart as far as they did. Lots of new parts now, but it could have been running a lot sooner.
@@StanleyKubick1 My english ain't perfect, Good to know tho, I'll remember
Finally some 135 action again 😁 but fyi. You should always connect chargers and boosters on the conection points in the enginebay on Bmws, because there is a failsafe on them and if you dont your ibc wount know that you charged the battery and can start making issues 😅
this comment needs to be higher up
More people need to know this, I see this so many times lol
Last video I said “I wouldn’t let little Willy change the oil on my car”, and so many butt hurts got mad at me. This dude puts power steering fluid in his transmission the very next video lol. That shit was so funny…
Hilarious but he was nervous as hell. Obviously he wouldnt be while doing your oil..
Thats a quick way to change your oil Will lol Stocked for him it sounded good !
Man i wanna see chris reach a million he so deserve it, man and he sure don’t ask for much but I’ll ask it from Everyone he came along ways and still making it from haggard 💯🙌🏾
Absolutely love the Will content lately lol. The close up on his face "no stop stop" was that of sheer panic and fear lololol.
Priceless 22:19
Rudnik, moving back to CT was the best decision you made. Love the Florida crew but the content with you, Will, Tommy, Grant, LZ is on another level. Keep grindin guys!!
Finally some content on the 135i. One of the best videos IMHO. Keep pushing, Will. Know that feeling. As I changed the Oilfilter housing gaskets on my N52, I cracket the freakin housing, because the steal bolt and the aliminum housing coroded and baked up the threads, sooo... 3 freakin bolts and I still manageddo destroy stuff!
running without coolant heats up cylinder walls fast since obviously in liquid cooled engine there suppose to be coolant behind "thin" wall transferring heat away, also temp gauge does not really work since there isn't anything to transfer heat to sensor.
Hell yeah. Bought an Oil Change off FCP just for helping the boy out
Thanks for making winter in the Northeast US bearable right now. Shitty weather with salt on the roads means no cruising around or raging corners on backroads. Its depressing but all your guys' videos help out big time.
tommys punches cant hurt he never lifts a finger but to smack you around
Hope to see the car on the road soon. Wishing the best for Will.
Knowing Will. it’s gonna be till it’s spring on east coast so like 2 months
It will be on the road, then off when the next thing goes 🤣 jk.. kinda
wrong fluid, and the heart rate monitor were so funny! happy to see the car start
Stoked for will. It’s a learning curve and at least he got some serious hands on work. BMW engines are pretty complicated and hard to work on without using oem tools. Just glad rudnik and many others helped will to get the parts and tools. Without them the engine would’ve been done at start up.
I didn't know how much I missed seeimg Grant in your videos until right now. He has come in clutch for will on a few different things
The power steering fluid in the trans 🤣🤣
Hell yeah Will need to get it wrapped up soon the 135 is my fav build honestly
Dude will reminds me way too much of myself I always be fuckiing shit up😂😂
Proud of you will. Get a o ring for your charge pipe and get a good catch can for that beast!
Let’s just pray the 135 doesn’t get rodknock 🙏🏽😭
So happy to see Will being excited about the start-up. Hope he gets it back up and running!
Truly the video of the century. I’ve been so stoked for this upload
22:15 to 22:30 had me in fucking tears lol. Wills face man LOL
The learning curve is steep. Go Will.
Doood the oil waterfall part got me freaked out Im impressed that will didnt pass out cause I would 😂
And congrats willly, happy for you boii
The old oil filter was crushed which meant he had the wrong one in there originally, it was too tall and thats why he had to use a wrench to get it to seat.
Damn smart thinking
Mine looked kinda like that on my N55 E90 when I changed the oil. Idk who did the last oil change but that shit sketched me out.
Damn lol I felt all of wills nervousness. I'm so happy to hear that car run! It sounded good dude !! Loud but good!
Thanks to everyone who sponsored this…fcp thanks a lot.
I’m so excited to see this car run! I’ve always loved this car! When chris sold it I was bummed.
You should check dme codes in ignition setting before trying to start the car. It’ll tell you any errors you have…be able to tell if have sensors unplugged, plugged/swapped to wrongs place etc…
“I’m seeing black dots”. LMAO
Great stuff
Good job guys
Ruddy you are the ultimate hype man, that's so rad you're giving him the kick in the ass and positive vibe to get it done 👏
I got my fingers crossed for you lil willy but after seeing the fluid mix up I'm kind of worried about the rest of the build especially the timing 😂
will you need to make that oil filter tighter, I've worked at a BMW dealer for 6 years, and it uses a specific tool to tighten/loosen it and you usually tighten it to about 13-23nm I think its 12-17 ft lbs
This video was so good I'm watching a 2nd time lol. I still can't believe Willy filled the trans with Ps fluid. Lmao I'm dead. Mistakes happen bro. Huge congrats on the car running again!
Between will putting power steering in the Beamer trans fill, and Chris singing Bob Marley. These boys are definitely baked… or maybe it’s just me 🌿💨😂
For them oil filters instead of using a metal tool on them or buying a kit, I use a 27mm spanner and an alternator belt as a strap, works every time
That thing started right up, sounds good af. Now to just button it up and finally drive it
So happy for Will I've been there a few times well I'm there now on my project it's very stressful but rewarding at the end !
So happy for Will! I was concerned about the timing but that first start up is huuuuge 💪
At least it started! Pretty sure charge pipe is not mounted on all the way u need to pull/push the charge pipe towards the manifold harder and the clip will click into place. And u do want to tighten that oil filter housing cap tighter with the tool, it should not just be hand tight. Will cracks me up man!! Almost there dude!! Get all that oil off the belt u don’t want that slippin off!
The 135 still needs a tune with the new turbo's and intakes. Hyped to see it run though!
Tommy laughed and I immediately gave a thumbs up 👍
Damn i would love to see Jack tuning this thing👌😎
Never comment on videos but i’m genuinely happy for Will..
One of the most exciting videos in so long
You got to love Will, He is like a human Labrador.
Good upper cylinder lubrication.
Bruh lmfao the moment 😂 🤣 the engine started and then bam an ad comes and you gotta wait little to skip it never fails when your Watching a vid and your into it.
Greet for the win. Dude is the best vlog drop-in.
Words of wisdom by Grant, what a good guy! 👍🏻
MaN I swear I was as nervous for Will as he was nervous for his engine blowing up 😂 like glad it started and all but the true test is getting it on the road
This started when I moved into my college dorm and now I’m starting my second semester lmaoo. But ups to will for keeping the project going!
I got some good laughs from this video! 😹 Congrats on the first start Will! I hope you can relax some now lol. Keep up the awesome content guys! 👌 👍
I found your channel during Thanksgiving break. You guys crack me up!!! 👍😎🤘
Just got an e46 330ci and definitely already made an FCP Euro order. Super quick on getting stuff shipped
Imagine the productivity if you had a 3rd person to keep on top of back ground stuff, from cleaning to keeping batteries charged. That would increase your video quality I think
Hopefully Will can get this together and gain some confidence from it. You got this bro!
Lmao when the oil came out like milk out of your nose
Congrats on finally getting first start
I was just looking through your page Chris thinking i missed this! Let’s go Willy boiiiii
Badass will!!!! I knew you could do it, was just a matter of time!!!!
Can't wait for all of you guys to cruse together in the Bimmers
I had a hard time buying the o ring for the charge pipe good luck! They want you to buy a whole charge pipe assembly. The aftermarket one you have with the bov needs the o ring from the oem.
you and tommy are a dynamic duo, but your videos have went to a whole new level since going back home.
So glad to see it start up good on you guys and happy for you will
You didn't throw the links to FCP in the description :)
Honestly though, big ups to Will and everyone else who helped make this happen for him. That first startup is always so gd nerve wracking.
WOO HOO! Been waiting for this day forever! Congrats Will!
Really putting out some quality content bro. So glad that will and you are together again
Watching this shit while out snow wheeling in the jeep! Vlogmas continues beezy b
Must be a BMW thing ! Last owner of my E46 Put Power steering in the Coolant
Also the oil filter cap is actually very hard, and you need a special tool to get the top off 😂😂.
The open oil cooler connections aren’t a big deal if just a few seconds on idle. If you drain the oil in the engine you will find you spit out less than a qt. I’ve done this before on an E36 w/ loose vanos oil line. Low oil pressure and oil spitting out of top side of vanos oil line. I was freaked but It’s not nearly as bad as might think.
I keep going back to 22:24 .....LOL!!!! camera zoomed in is priceless
That was sick fellas 👍🏼
Also I love how Will pointed out it was just a little more than 3 days to get it started
tommy in the videos is so funny man 😭
Please put a catch can on the 135!!!
Sooo fuxking stoked for you Will !! You put in the work and did it all your self. Yeah you made some fuck ups but that’s part of learning. Proud of you man
Dude fuck yeah!!!! “YEAHHHH!!!… NOOO NOOOOOOO”😂 good job Willy. Looking forward to more of this
Install a crank belt guard on the front so if the belt ever shreds it doesn’t go Into the motor👏🏼