HAMER Front Bumper Replacement | LandCruiser 200 Series | Fitment and First Impressions!
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2020
- In this video I get a really exciting bit of kit fitted to the 200 Series! The Hamer replacement front bumper has transformed the vehicle and given it a new face for the future videos.
Disclaimer: I had a workers permit to travel from Gauteng to KZN and did not do it illegally.
Hamer Front Bumper Link
hamerafrica.co.za
Thank you for watching and don't forget to like and subscribe.
Thank you!
Music
Music
Licensed by artlist.io
Music - www.epidemicsound.com
4x4 Accessories - www.frontrunneroutfitters.com...
Interior Vehicle Protection - www.takla.co.za
Solar Setup - flexopower.co.za
CAMERA SETUP
Canon 7D
Canon 80D
Canon 5D Mark IV - www.ormsdirect.co.za/canon-eo...
Canon 24-105mm - www.ormsdirect.co.za/used-can...
Canon 100-400mm Mark II - www.ormsdirect.co.za/canon-ef...
Canon EFS 18-135mm - www.ormsdirect.co.za/used-can...
GO PRO HERO 6 Black - www.ormsdirect.co.za/gopro-he...
GO PRO HERO 7 Black - www.ormsdirect.co.za/gopro-he...
DJI Mavic PRO - www.ormsdirect.co.za/dji-mavi...
DJI RONIN S - www.ormsdirect.co.za/dji-roni...
RODE Video Micro - www.ormsdirect.co.za/rode-vid...
RODE Video Mic Pro + - www.ormsdirect.co.za/rode-vid...
RODE Rodelink Wireless Audio System - www.ormsdirect.co.za/rode-rod...
ACCESSORIES
JOBY Gorillapod 5K KIT - www.ormsdirect.co.za/joby-gor...
GOPRO Floaty Grip - www.ormsdirect.co.za/gopro-th...
GOPRO Floaty Backdoor - www.ormsdirect.co.za/gopro-fl...
GOPRO Suction Cup - www.ormsdirect.co.za/gopro-su...
FAVOURITE GEAR USED
Thule Crossover 32L Backpack - thulestore.co.za/32l-backpack...
Thule Subterra Power Shuttle - thulestore.co.za/thule-subter...
That monster looks like it could survive anything out in the wild. You guys in SA are really crazy about off-roading and land cruisers.
Cheers
Thanks mate! They are amazing vehicles for sure and it’s done well so far 🙏
Nice verby sien nou eers Hamer wow build for the bos
You look so happy! And I am kinda looking forward to see a demonstration of the winch, in the Delta! :)
Very happy! Can’t wait to get out to the Delta to test it out! 😂🙌 thanks for watching!
That looks great, showing the serious 4x4 off-road looks
Thank you!
Thanks Ed. Need to get one for my Prado :-)
It looks rugged and amazing 🐃
Well I don´t know much about 4x4ing in SA (being in a different area of business) but it is always great to see guys working with stuff they know! The bumper really looks the business! Wish you the best with it and looking forward to more contents. Thanks!
Thank you! Very happy with it! Lots more content to come, thanks for supporting the channel🙌
Rily looks amazing.
Thank you so much!
The transformation is awesome 👍
Thank you! 🙌
Been looking forward to a front bumper on that 200!
Been a long time coming 🙌
Finally got to catch up on YT! Awesome video man! New bumper looks dope!
Thanks bud! Very happy with it!
Also love how hidden that winch is! I'd love to have a more subtle winch on mine one day.
Yeah it’s nice a subtle, I like too keep it under the radar 😂🙌
Hi Edward that looks very GOOD .Only thing left is to test it in the ruff .Enjoy and thanks for sharing .
Thank you for watching again Sarel! Can’t wait to test it out there 🙏
Cool vid bud and the bumper looks mint 👌
Thanks Chris!
Ooooooh Pappie 💥 my goodness Ed it's freeking Awesome!!!! Way to go Edward 👌 I can even spot aNicy iKamper 😆😜 Looks really "Botswana" cool 👍 you're going to love that piece of equipment 👌👍🔥⛺🐾
Thank you Herbert! Really appreciate the constant support and kind comments!
Nice 1 Ed. That bumper looks amazing. Wil work out great in the Botswana bush. BW is awaiting your next visit bro
Thanks Andrew! As soon as the borders open Botswana is going to be my first stop that’s for sure!
Looks really good!
Thank you!
I loooove it! Congrats!👏👏👏
Thank you so much Blaise 🙌
Looking sick, Ed. Really transforms the stance of what was a gentleman’s car and is now an off-roader. Reckon those shackles need colour coding like on the @4x4Ventures Ranger😉. Bet you can’t wait to get dusty again!
Thank you so much Neal! Red shackles are on the way! 🙌😂 can’t wait to get out there you are right! 🙌
Looks awesome 🇿🇦🇿🇦
Thank you bro!
I love your videos and now can you do a review in your car please your channel is💯✌😘.😉
Gidday, Edward, maaate!!
Your LC is looking like a beast. Well done.
I still have the wild dogs in my head!
When do you reckon you'll get back to Bots?
God bless,
Dave
Thank you Dave! As soon as the borders open but unfortunately it doesn’t look like it’s going to be anytime soon 👎 supposed to be camping on the Khwai River in Moremi tonight so pretty bleak!
Nice dude!
Thanks mate!
Looks too good !!
Thanks!
Edward, splendid video! What about topping it up with a Factor 55 Flatlink? Was the electrics for the winch relocated into the enginebay? Brgds
Thank you so much Peter! It’s quite a pricey item but when finances allow it’s definitely an addition I plan on adding! 🙌 have you had experience with the Factor 55? There was enough space behind the grill for the winch electrics 🙌 so I can either plug the controller in there or use the wireless controller
@@EdwardBath No worries :-) Yepp, they are priceybut the safety-factor when winching such a heavy vehicle as a bogged down J20 as You have, cannot be underestimated. I love the F55 Flatlink but I am considering (....!) the Ultrahook (abt 2xPrice....) I ONLY use softshackles these days. When in doubt, I grab my Bubbarope Gator-Jaw shackles.
As for the electrics, I have found them better protected in the engine bay provided there is room :-) That being said, we suffer way more hammering from the elements in the arctic hemisphere... Brgds
Awesome thanks for the advice Peter! I’m still new to the winching game so thanks for the help, will definitely be investing in the future to make recoveries as safe as possible!
Wait is over with new video....
Very good looking bumper, you mention it did not sag after the fitment, did it change now after having it fitted? It does not look very heavy when the guys picked it up?
Thank you Henk! The springs have settled a little but you won’t notice it unless you have a measuring tape, they were 2 pretty strong fellas but the bumper weighs around 70kgs with the winch weighing in at 40kgs 🙌
@@EdwardBath Thanks, this video got me thinking, so I went and put 50 kg on the front of the Fortuner. Dropped by 5 mm (I have OME).
So I’ve got the bar and winch application springs on the front so I’m sure that’s why it hasn’t really dropped 🙌 which springs have you got?
@@EdwardBath Thanks, Yes, I have OME. Thinking of taking the plunge... First need to fit new tyres this week...
I would love this, but they only ship on australia
That is one sexy bumper, do they make them for the 100 series?
Hey bud! They do look great hey 🔥 speak to Safarico 4x4 and they will give you all the info you need 🙌
Ed how much weight does the bumper and winch add to the 200? Would you say it is worth the money to do this? It certainly looks nice and aggressive
Around 60kgs on the bumper and 55kgs on the winch 🙌
How did you cross provincial lines during lockdown? 😎 what reason did you use? Im asking for a friend
As I stated in the description I did work in KZN so I had a work permit. 👍
hi is the bumper solid enough when hit animal? Thanks.
Hi, depends what animal and what speed but generally yes it is.
Why didn’t you go for a hooped bar? Just thinking that if you are remote touring Africa, cows and goats are also sharing a lot of the roads.
I enjoy the look of the king series bar, I avoid driving at night so the risk of an animal strike are minimal as the visibility is generally good. The looped bars definitely provide more protection but this still adds value and I really like the way it ties into the lines of the vehicle 🙌
Not familiar with that winch manufacturer - what cost we looking at for 1300 option
It’s an Australian brand and it’s R14k for the 13 000 pound option so that’s the reason I went for it, very affordable 🙌
@@EdwardBath yeah that is affordable. Uhmmm, interesting
Other brands you are looking at 20-25k for similar so it’s worth it 🙌
Precision fit 5:12 ......., as the guy files down the new bull bars/bumper presumably to make it fit ..... LOL
Key word in your comment is presumably, well you presumed and you were wrong. It’s filing off the edges of the steel plating removed to insert the headlamp washers.
Hi, I like the bumper. Your channel and review is great. But I think you need to work on better back ground music. Hope you don't take offence.
Hey bud! Thanks for the compliment! Music is impossible, it takes hours to find the right song. Some people love the music I use and some people don’t, it’s impossible to please everyone. Cheers 💪