Thank you, Both are SPI interface, but detailed setup is different. Orginal LCD is SPI mode 3 but OLED is SPI mode 0. SPI mode is type of signal detection timing. Clock, initialize code are also different. Please check here : github.com/DongkwanYi/OLEDBOXER
I've just done this on the Zorro, all working fine on edgetx 2.9 Very beautiful, thanks for this. The board wiring is easy to figure out. Looking at the LCD connector wit the Backlight connector on the left the pinout is 1 to 12 from left to right so opposite as the boxer pinout. There's a vertical row of capacitors just above the LCD connector. The right side of the bottom one is pin 7 (3.3V). The horizontal row of resistors to the right of the capacitor are pins 8 to 12 from left to right all looking at the board with the backlight connector left and the LCD connector right. I just took GND from the backlight connector and soldered all the other wires directly onto the resistors or the cap.
Absolutely awsome, the only thing i don't like ahout the boxer, is that low contrast LCD screen. The OLED mod just fixed it right, can't wait to upgrade mine, thank you for the great work!
Thank you. Actually, after a few weeks field test, At direct sunlight condition, the default LCD is better readable than OLED. The brightness of OLED need to be a little brighter(by firmware fix or more hardware mod), protection sticker suffer OLED brightness. I make window at protection sticker. Except direct sunlight condition, OLED is looks good for me!
Nice looking mod, though I'll probably stick with the original screen. At some point, I'd like to mod the pocket folding antenna onto the boxer. I see radiomaster is now selling the antennas on their website and hopefully some of the more local shops to me will carry them soon.
Thank you!! It seems like there are a lot of people who would rather have a toggle switch than a push button. I'll try it, but it takes some time. I'm busy at this season.
Yes, It is my model name. Ugilder and INAV setup : th-cam.com/video/1nyaZPlXg9s/w-d-xo.html If you want to change the model name, MDL->choose the model and go SETUP 2/12.
Love this mod. I just received my boxer today. I will be doing the mod later on down the road. I was wondering if you might have any idea how to replace the two 2 position switches with 3 position switches???
Thank you, 2POS switches has 2 pin connector, 3POS switches has 3 pin connector. I think it needs resource mod and hardware mod. I'll trying it, but cannot be guaranteed.
Hi, I look at the boxer's PCB, I found a MCU(15W408) for switch/pot interface. The MCU and hardware wirings and firmware resource reallocation are needed for your requirement. It is hard for me. I'm sorry for not being able to accommodate your request.@@blakelove4058
What are you expecting to gain by doing this? or did you do it because you could? I would love to know what the visibility of the screen is in direct sunlight.
I'm hoping for better visibility initially, the results at direct sunlight were not as desired. But except in direct sunlight, like under the shade or room condition, OLED is looks good for me. To be precise, it is a cosmetic aspect, personal preference. Because of Brightness issue at direct sunlight of OLED, I'm in the process of improving the OLED mod. As you know, the screen for monitor has evolved from LCD to OLED. I would appreciate it if you could understand in this context.
Thank you, nice work! Could you please compile version 2.9.1 and add source code to the github repository(and may be a short description of modified files)? I've tried to build it for tx12mk2, by only adding modified lcd_driver_spi.cpp , but couldn't get working internal elrs module.
Well, frankly, direct sunlight condition mean varies. At peak summer sunlight , stock LCD is more readable. In other condition, OLED is superior. And flickering at fast screen movement is less.
Great work - but why? You've replaced a 128x64 low power monochrome sunlight readable display with a 128x64 high power monochrome poor in sunlight display. Or did I miss something?
You are right. At direct daylight, default LCD is better than OLED. For this reason, I make a window at LCD cover(part name : Lens sticker). Except direct daylight, like in shade or room condition, OLED is looks good for me. OLED power consumption is acceptable, I think. At 10% pixels on, it draw 0.5mA(6.5mW) typical, at 100% pixels on, it draw 17mA(71.5mW) typical.
Boardside : github.com/DongkwanYi/OLEDBOXER/blob/main/pinout_boardside.png OLEDside(silk) : github.com/DongkwanYi/OLEDBOXER/blob/main/photos/diymore2.42OLED12864_bottom.jpg Boardside pin connector(pin order) is same both Zorro and Boxer. Check here : github.com/DongkwanYi/OLEDBOXER
I'm sorry for more detailed information. I don't have Zorro. But I'm sure about feasibility for Zorro. Because Zorro, Boxer, TX12MK2, Pocket has far similiar circuit and firmware. They even use the same MCU.
@@celeselements Grazie magari qualcuno con la zorro farà un video a riguardo... Stavo proprio attendendo che radiomaster facesse questo upgrade cosi da poterla acquistare..sono vicino💪
Literally just ordered an OLED for this mod a few days ago! Can't wait to do this mod.
Good luck!
Wonderful work! Thank you for sharing your discoveries!
What was the communication protocol used to talk to the original LCD?
Thank you, Both are SPI interface, but detailed setup is different. Orginal LCD is SPI mode 3 but OLED is SPI mode 0. SPI mode is type of signal detection timing. Clock, initialize code are also different.
Please check here : github.com/DongkwanYi/OLEDBOXER
Excellent work, I was literally thinking about this a week ago.
Thank you!
Try it!
Great mod, and now you can use the old backlight output for the stick lights, makes them dimmable etc.
Thank you, Someone in the ELRS channel on discord implemented what you said.
You can make stick lights dimmable with the knobs too. I made a short tutorial on it.
@@nadabird5349got a link?
Great!@@nadabird5349
@@celeselementswhich discord server is that?
I've just done this on the Zorro, all working fine on edgetx 2.9
Very beautiful, thanks for this.
The board wiring is easy to figure out. Looking at the LCD connector wit the Backlight connector on the left the pinout is 1 to 12 from left to right so opposite as the boxer pinout.
There's a vertical row of capacitors just above the LCD connector. The right side of the bottom one is pin 7 (3.3V). The horizontal row of resistors to the right of the capacitor are pins 8 to 12 from left to right all looking at the board with the backlight connector left and the LCD connector right.
I just took GND from the backlight connector and soldered all the other wires directly onto the resistors or the cap.
Thank you, Great!
"Backlight connector on the left the pinout is 1 to 12 from left to right so opposite as the boxer pinout."
Important!
This is amazing news for us as a Radiomaster zorro owner. Would you like to share the detail mod for zorro ? We would like to watch that
Is Zorro using the same OLED screen as Boxer?
Yes, same as boxer.@@Ptorpong
@@celeselements Thanks.
Absolutely awsome, the only thing i don't like ahout the boxer, is that low contrast LCD screen. The OLED mod just fixed it right, can't wait to upgrade mine, thank you for the great work!
Thank you.
Actually, after a few weeks field test,
At direct sunlight condition, the default LCD is better readable than OLED.
The brightness of OLED need to be a little brighter(by firmware fix or more hardware mod),
protection sticker suffer OLED brightness. I make window at protection sticker.
Except direct sunlight condition, OLED is looks good for me!
@@celeselements Can you invert the colors for readability?
Yes, I made a firmware for you!
github.com/DongkwanYi/OLEDBOXER/tree/main/firmwares
Check README and firmware!
Nice looking mod, though I'll probably stick with the original screen. At some point, I'd like to mod the pocket folding antenna onto the boxer. I see radiomaster is now selling the antennas on their website and hopefully some of the more local shops to me will carry them soon.
Thank you.
Actually, after field test, outdoor at direct sunlight condition, default LCD is better than OLED.
Boxer on folding antenna is cool!
Nice work!
Any chance you're planning on flipping the momentary & 2-position switches? That's a video I'd really like to see!
Thank you!! It seems like there are a lot of people who would rather have a toggle switch than a push button. I'll try it, but it takes some time. I'm busy at this season.
Wonderful. Thank you for this video. everyone should see this 😊😊😍
Thank you!
Hi, what is the ‘UgliderINV’ screen you gave setup? Looks interesting and I would like to try it on my boxer
Yes, It is my model name.
Ugilder and INAV setup : th-cam.com/video/1nyaZPlXg9s/w-d-xo.html
If you want to change the model name, MDL->choose the model and go SETUP 2/12.
Love this mod. I just received my boxer today. I will be doing the mod later on down the road. I was wondering if you might have any idea how to replace the two 2 position switches with 3 position switches???
Thank you, 2POS switches has 2 pin connector, 3POS switches has 3 pin connector. I think it needs resource mod and hardware mod. I'll trying it, but cannot be guaranteed.
@@celeselements Thank you, I look forward to your findings. Its guys like you that make this hobby so interesting..
Hi, I was just wondering if you had any free time to look into the switch mod?@@celeselements
Hi, I look at the boxer's PCB, I found a MCU(15W408) for switch/pot interface. The MCU and hardware wirings and firmware resource reallocation are needed for your requirement.
It is hard for me. I'm sorry for not being able to accommodate your request.@@blakelove4058
What are you expecting to gain by doing this? or did you do it because you could? I would love to know what the visibility of the screen is in direct sunlight.
I'm hoping for better visibility initially, the results at direct sunlight were not as desired.
But except in direct sunlight, like under the shade or room condition, OLED is looks good for me.
To be precise, it is a cosmetic aspect, personal preference.
Because of Brightness issue at direct sunlight of OLED, I'm in the process of improving the OLED mod.
As you know, the screen for monitor has evolved from LCD to OLED. I would appreciate it if you could understand in this context.
Hey, will this work even with the I2C type display? Think you said it doesn't matter, just making sure
Some OLED panel is switchable between SPI and I2C. Check it.
BOXER support only SPI interface.
Do I need to download EdgeTX 2.9.0 to my radio first? I currently have 2.8.0, can I upload the OLEDBOXER292 firmware?
Please check it :
6:17 at th-cam.com/video/LZEmpTxd5Lc/w-d-xo.html
Love your work, Just want to ask if its possible to install a Color screen? 🤔i really like boxer but not color less screen
Color screen is a different animal. It is impossible for me.
@@celeselements i did some research, now I know indeed they're
Thank you, nice work! Could you please compile version 2.9.1 and add source code to the github repository(and may be a short description of modified files)? I've tried to build it for tx12mk2, by only adding modified lcd_driver_spi.cpp , but couldn't get working internal elrs module.
Thank you!! I upload V2.9.1. Please check it. I'm sorry for late.
Can this mod be done to the Taranis QX7?
I don't have QX7. I think it might be possible to modify it.
❤
Thank you!
hope you have tutorial for radiomaster zorro oled screen conversion
I'm sorry I don't have Zorro. But it is very similar Boxer.
This is best mod❤
Thank you!
Thanks you! Can I make it for Radiomaster tx12?
Yes, of course.
But how readable is it in direct sun light?
Well, frankly, direct sunlight condition mean varies. At peak summer sunlight , stock LCD is more readable. In other condition, OLED is superior. And flickering at fast screen movement is less.
Is it possible to change the color of the LED to blue?
I didn't tried blue, but I think it need different supply voltage.
@@celeselementsI think he's talking about the power LED indicator
@@Yaroslav_Tselovanskyi Yes, Thank you! I confused it. The power LED indicator control code is on line 130~136 of the board.cpp
I like this idea, could maybe do this for a zorro too
Yes, Boxer, Zorro and TX12 have electronically almost same structure.
@@celeselements Makes sense
Great work - but why? You've replaced a 128x64 low power monochrome sunlight readable display with a 128x64 high power monochrome poor in sunlight display. Or did I miss something?
You are right.
At direct daylight, default LCD is better than OLED.
For this reason, I make a window at LCD cover(part name : Lens sticker).
Except direct daylight, like in shade or room condition, OLED is looks good for me.
OLED power consumption is acceptable, I think.
At 10% pixels on, it draw 0.5mA(6.5mW) typical,
at 100% pixels on, it draw 17mA(71.5mW) typical.
Hi For zorro radio The pinout where to solder?
Boardside : github.com/DongkwanYi/OLEDBOXER/blob/main/pinout_boardside.png
OLEDside(silk) : github.com/DongkwanYi/OLEDBOXER/blob/main/photos/diymore2.42OLED12864_bottom.jpg
Boardside pin connector(pin order) is same both Zorro and Boxer.
Check here : github.com/DongkwanYi/OLEDBOXER
@@celeselements thanks
I'm sorry for more detailed information. I don't have Zorro. But I'm sure about feasibility for Zorro. Because Zorro, Boxer, TX12MK2, Pocket has far similiar circuit and firmware. They even use the same MCU.
@@celeselements Grazie magari qualcuno con la zorro farà un video a riguardo... Stavo proprio attendendo che radiomaster facesse questo upgrade cosi da poterla acquistare..sono vicino💪
Elrs Model Can make? Thanks you!
Any RF modes are available. Mine is 4in1 initially, but I replace it with ELRS.
need for qx7
I don't have QX7. I think it might be possible to modify it!
Can you give me Game forder? Thanks you!
You can download here : www.radiomasterrc.com/pages/firmware-updates
Download any file for Boxer(SD-content->SCRIPTS->TOOLS).
@@celeselements thanks you very much!
The screen is flickering, the original is better...
That’s just from the camera shutter speed
@@MrJohnston123 Not sure, it's also because the screen has a bad PWM refresh !
my friend in the video meters first er284 then er 285 why? I can directly put the latest version OLEDBOXER290_mode2.bin
Latest version update brightness control. Please use 2.9.0.
I'll upload for 2.9.1.