Bending techniques for square pipes and metal rods // Handmade pipe bending template || DIY

[@AntoniusBoerenbrink]

Honesty , i didn't expect the tube would hold it's square profile while bending it this way. This an is amazingly simple and cheap solution. Respect.

[@JustinPaul1st]

One year later... surely there are more modern ways to do this...but it's the creativity of making that template and the end result that makes the idea amazing...And am s new subscriber👍👍👍

[@restorerestoration4705]

Nice job you did on restoring the old jack

[@AM-dn4lk]

Very nice work. I particularly liked drawing the circle with the square. Thanks for sharing.

[@ironwelder1001]

Glad you liked the idea 👍

[@elalacran37]

How is that kept steady?

[@buffalobob7172]

I bent twice as large and thicker square tube had problems with it kinking some solved the problem with plain sand pored inside it kept the shape then pour out and weld as you did.

[@ironwelder1001]

Estoy asombrado por tu fuerza 😁

[@workonitm8]

Great ! I never would have believed that square tube could have been bent that easy.

[@juanpabloserranoquispe48]

Buen trabajo y siempre dando las medidas gracias maestro desde lima peru

[@degeneratewelderznation]

Super sick!! I concur with the circle using the Square. Thanks a lot!! Now time for me to try it. Let's go!

[@guillermonieri4203]

Great tool. Thank you.

[@zalayeta007]

Perfection yet very simple, thank you, true genius

[@marperf]

Thanks. It's nice to see someone actually weldinstead of tacking

[@marvinwilson-dq8ec]

Great craftsmanship, I like that bending tool 👍💯

[@leslieedgardlindop7202]

Great .comes in handy cheers les from Adelaide south Australia

[@SultánMehned]

Great. 🙋🏻‍♂️ Cusco 🇵🇪.

[@danielsaavedra69]

Great Idea!

[@juanjoseblanco1872]

Realmente me sorprendió por la simplicidad y efectividad de la herramienta , mis más sinceras felicitaciones por su altruismo , saludos cordiales desde Catamarca Argentina

[@ironwelder1001]

Muchas gracias ✌

[@technicware]

What size and thickness of tube you blended in the video?

[@joserubiogonzalez2526]

¡Genial excelente!
Gran máster felicitaciones

[@citronmetalworks2220]

Beautiful work!

[@JohnVHLife]

Cool tool, people still use stick welders?

[@blackmasculine1]

This is fantastic thanks for sharing and you have a new subscriber. Keep up the great work❤

[@hemtet5500]

What were those used for?

[@percivalscott6636]

Wow wow wow wow wasn't expecting that

[@onesmusengineer6768]

Great job ,,,

[@MJKarangkobar]

thanks for sharing, very nice and excellent work.

[@whathappened2230]

Thank you for this video! I really like your way, simple and effective!

[@ironwelder1001]

Muchas gracias ✌

[@GranPrime-ul4cy]

@@ironwelder1001 bbb

[@GranPrime-ul4cy]

@@ironwelder1001 b

[@letteriogallico1931]

Complimenti ottimo lavoro !

[@robsonrobsonlmatias4210]

Very very good!!!! 👏👏👏👏👏👏

[@marcossuelos5883]

Parabéns perfeito 👏👏👏👏

[@ironwelder1001]

Obrigado 👍

[@luisguerra3644]

​ 😅😅😅😅😅buenos

[@tortaotalk]

Very good idea, I've been following.

[@ironwelder1001]

Thanks 👍🏻

[@manuelfonsec3631]

Me gusta su técnica de doblado May gracias

[@sunnyahmad1076]

Mantap tuan...!!!

[@Ponimancp]

Sangat bagus hasil nya ...

[@JackieJackson-w1z]

Great video. Do you have a list of materials and thicknesses?

[@tiredoldman5329]

Great idea! Going to have to try that! Thank you for sharing!

[@roneydeoliveirayoneda8933]

🎉🎊👍👍👍 Nice. Thank you 🙏

[@cddvdbluerai]

Top das galáxias...

[@romancatabay917]

Can you bend unistrut framing with this design?

[@ironwelder1001]

No! I'm not strong enough to overcome

[@delipambaram3392]

What size tubing you bending

[@AdiLas-my3xb]

Sungguh kreatif sangat membantu dan menambah wawasan

[@kentdixon5716]

Thats really cool, I have to make one, thanks for posting !!

[@fromthepeanutgallery1084]

Pro's always have the best skills, tools, protective gear and workbenches. Learned a lot thanks;.

[@gokilchannel6485]

tehnik menabjubkan...

[@leopoldsaroyan3439]

Very good ! You save my life !

[@ironwelder1001]

✌👌

[@carloshenrymayorga893]

Thank you for sharing this video and teaching this technique to bend square tubes, excellent work!

[@ironwelder1001]

Thank you friend!🤝

[@tracollgreg78]

Simple tool but great results

[@JagathPalitha-f8b]

Very nice thank you

[@idekreatifofficial]

Idenya mantap bos qu 👍👍👍👍

[@ironwelder1001]

✌🤝

[@ricosalditos4570]

Perfect 👍

[@sayedirfanurrahman8787]

10/10 Great Job

[@bengkellasndeso4913]

Sangat kreatif 👍

[@southern0949]

Nice and simple. Thanks for sharing. What size and wall thickness square tube can you bend this way?

[@ironwelder1001]

I bent a maximum thickness of 2 mm

[@CraigHollabaugh]

That's impressive. Thanks, I have some new ideas now.

[@dellamphear9367]

Outstanding!!!

[@SurenderSingh-lp4cp]

can we bend flat bar also ?

[@ironwelder1001]

Yes, sure

[@wimdekoker9153]

Brilliant!!!

[@GUSTAVO-i3r5f]

Exelente!!!👌🏻

[@JoseLopez-ci9gg]

Excelente maestro gracias por compartir

[@ironwelder1001]

✌🤝

[@IslamicAmericanTutor]

Wow, that one handed cut on an angle grinder was simultaneously incredibly impressive and horrifying to watch.

[@randallmccorquodale3290]

Great video. Thanks for posting!

[@ironwelder1001]

Thanks bro

[@codingchewie]

What’s the spec on the square tubing?

[@franklinduarte9379]

Con esta herramienta Puedo doblar un tubo rectangular de 1.5* 3 pulgadas ???

[@ricardojimenezescobar5438]

No conocía su canal, me gusto mucho su trabajo. Quedo suscrito con campana y like. Saludos desde Veracruz. México.

[@ironwelder1001]

Muchas gracias ✌

[@sawargijayalas]

Kerja bagus mantap

[@juancortez4726]

Awesome! Thank you!!

[@ironwelder1001]

Thanks

[@martinwahyudi3081]

Amazing.... Thank a lot...

[@odenkediri]

Apakah bisa untuk pipa besi yang lebih tipis ??

[@ironwelder1001]

Tentu saja

[@pintobengkel8112]

Hadir nyimak boss

[@ferwinrodrigo7480]

Anu poh size limit Nyan s square pipes?

[@dennynugrahanatajaya6665]

wow verry amazing you are so genius sir. good luck

[@ironwelder1001]

Thanks 🤝

[@mariooddoero2389]

Que espesor es el caño que usa

[@ironwelder1001]

1,5 mm

[@j4junaid917]

Good job bro

[@federerkrugger4200]

Genioo!!

[@adeyeraoluwaseun5288]

Awesome video!! Pls do the uneven stresses that occur as a result of that bending matter/affect the strength of the rod?

[@ironwelder1001]

No. A circle is always stronger than a straight line

[@jackies8538]

my question is why didn't yours dimple on the inside of the outside I see some of these experts saying you got to do this and do that they all say they bend and put dimples on the inside and the outside why didn't yours it looks like it's thick.

[@tano1747]

Depends on the bend radius

[@ironwelder1001]

Whether there are dimples or not, it depends on the diameter of the metal being bent

[@Luisppk2812]

Very good. But, how to do with a circle 5 or 6 times bigger?

[@jerrylewis7702]

there is a thing called "elementary school"

[@jaimesaavedrap9437]

exclente un saludo,, y para un circulo de 40 cms de radio

[@johnjohnson6196]

Why does this work? Why don’t the sides crimp or collapse?

[@ironwelder1001]

Because bending occurs in a smooth circle

[@brianb-p6586]

It will crimp, depending on the combination of bend radius, tubing size, wall thickness, and metal alloy and temper.

[@jacquesmartin9370]

Perfect bon bagay much Bueno great

[@ironwelder1001]

Thanks 🤝

[@jorgearturofonsecahidalgo5875]

i love it

[@anestoroliveira3166]

Genial prbens

[@Elcartel_24]

Nice🎉

[@narrowroadtransport8318]

Badass 🎥 I had no choice but to subscribe after lol great work

[@ironwelder1001]

Thank you friend 👍🤝

[@jorgegabaldon5069]

Que calibre es ? Y mesida del perfil !!

[@Ali-qc6cr]

Hehat om bagus sekali

[@manuelantoniovargas2121]

Estas matrices solo sirven para trabajos en serie
Pero mi taller recibe trabajos muy variados

[@manuelfuentes4693]

EXCELENTE VIDEO. PEROOOO CUANTO ES LA MEDIDA DE CADA DETALLE. MI HNO XFAAA

[@aliorr9356]

To make the mandrel I have seen people use a cars rear brake disc. It’s a good solid handy instant perfect circle

[@zapa1pnt]

That could, certainly, be good. You just have to make sure whatever you use will fully support
the material you will be bending, to avoid possible distortion. 😁✌🖖

[@argenisuceta]

ESO ES UN PERFIL (PTR) CUADRADRO DE 1'' X 1'' PERO PODRIAS DOBLAR TAMBIEN 2X2 O RECTANGULAR 3X2, 4X2, ETC???

[@estelamedina7941]

pocas manos blancas se ven trabajando .solo veo manos negras trabajando hasta el momento .victor

[@ironwelder1001]

la forma en que es

[@juanzimbron5202]

Very good video...thanks for sharing

[@ironwelder1001]

I'm glad you liked it 🤝

[@nationalwelding9463]

Nice work bro

[@ironwelder1001]

thanks bro

[@GMetalArt]

Nice ideas

[@ironwelder1001]

Thanks 👍

[@joelongstaff7601]

Great video Sir thank you. What was the wall thickness of that tubing? I am now a subscriber looking forward to more.

[@IsaqueSena08]

Thanks😊

[@jimrt1738]

Nice jig 👍

[@ironwelder1001]

Thanks 👍

[@davidmstein1149]

Perfeito 🇧🇷👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👏👏

[@ironwelder1001]

Obrigado 🤝🤝🤝🤝🤝🤝🤝

[@chrissample3047]

Cool neat

[@rsrawatkimoli5805]

Thank you

[@piait.yunususkywatcher2977]

Good idea

[@felipeaca]

Mi bro tiene todo un taller pero no tiene compas