GPz 900r Anti Dive Unit Rebuild
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2023
- A video of what's involved in rebuilding the 1989 GPz900r front fork anti-dive units. Parts available from the GPZ Zone in the UK. The top brake fluid portion of the unit is a throw away item and has no parts. How to test both halves is in the bike manual.
- ยานยนต์และพาหนะ
After asking you if the unit comes apart I went on my work shop (shed) and had an old unit with broken nipple in used an angle grinder and cut it in half its threaded probably a 17 hex or 18hex with hole on middle will try to undo mine because piston will not move,
Good video, the kit is no longer available, do you know where to gt one
Hey Mate , You can try a fella named Sean. He runs the GPZ900r shop on Ebay (Skycaptain 789). send him a message.
Thanks have contacted him, question the top part of the unit with bleed on it is it supposed to move or is it fixed
I beleive it moves down A very small amount (1-2mm) when brakes are applied.
Did you manage to get the kits? I can not find the user on ebay. Thanks Richard
All my parts were in good condition so I put it together after a bit of white grease Sean said he will contact me when he has the kit
@@andymoorhouse8820 thanks for your reply. I managed to contact Sean too. There is an underscore in his username, which is why I couldn't find him initially. Skycaptain_789. Mine don't look too bad either now they are disassembled and cleaned, but I will replace all the l rings for prudence.
Hi,this anti dive systemis the same of Gpz 1.100 1984?
Thank you !
Don't know that unit, if its looks the same then I guess it would be similar internally.