3 Anti-flickering solutions for LED headlights - What is a decoder and how to install?
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- For more information, visit our homepage: www.novsights....
Get a CB-6 decoder today:
Amazon🎁: www.amazon.com...
Novsight Homepage📣:
www.novsights....
---
Got a pair of new LED headlights but it went flickering? Let us show you 3 ways to fix it!
Chapters:
0:00 Intro about CANbus
0:45 3 Types of decoder
0:53 How resistor works
1:12 Resistor Pros and Cons
1:24 How capacitor works
1:32 Capacitor Pros and Cons
1:40 How a combination decoder works
1:58 Combination decoder Pros and Cons - ยานยนต์และพาหนะ
I have a car with auto stop start and when my car turns back on at stops I get one quick flicker I assume because the engine draws enough power to make my voltage drop below the working range of my led drivers, will this have any impact on that or no? Like I need a capacitor inline or something
Thanks for the video very nice and good
Have question ? The Novsight CB6 Decoder works on 2015 Toyota RAV4?
Hello, yes, it should work on the Toyota
Will a decoder work for my issue novasight cb6
I have a 07 jeep compass and the issue is they turn off and on both sides do it not same time though
Hi friends.
Do you know if this can work on a vectra c 2006?
2010 Honda crv daytime running lights flicker, will this fix it?
Will this help with the led headlights on my 2002 F150 harley davidson edition truck, ever since I switched to LED bulbs in the headlight the radio stations from far away 50 to 100 miles away now sound with static due to the lights. When I had the halogenated bulbs the stations used to come up clean loud and clear. Will this help with the led light static on the radio?
LED headlights HIGH BEAM blue light on the dash lights up immediately, but High Beam bulbs lights up with a delay of 1-2 seconds. Is it an issue with ballast or smth else?
i had a Toyota mark 2 jzx110, has an h4 as foglight in the headlights (not the bumper). while using novsight it flickers on low beam, however works fine on high beam. tried using canbus but the headlight it is connected to stays on high beam but the other light works perfectly fine. and vise versa while using canbus on the other headlight. any solution for this? currently using 3 holders one for canbus(since it was causing the light to stay high the holder is free from connection) other two for the LEDs. works fine but not sure if its okay?
If the H4 only works as high beam, that might be because the decoder didn't work in your car module. Please contact our customer service to acquire further solutions.
@@NovsightAutoLighting please share a link
Will this work on a 2003 Corolla that has daytime running lights?
Hello, it will usually work. Could you please tell me more details about your flicker problem? So I could provide you with better advice.
It works with corolla 2010 high beam drl?
Hello! Yes, it should work.
There are different types of decoders for different types of LED bulbs. Please confirm the LED type on your car and select the corresponding one.
blubs 🤣🤣
I hate this AI commentary so much, stop being so lazy and narrate it yourself!
Thank you for your feedback! All of our scripts are written by our team. We will take your comments into serious consideration and strive to improve.
I have a 2008 doge avenger 2.4 se I got led and hid and every time they will ficker
Me too 2010 avenger still flickers
My 2013 does the same thing
Did y’all try a capacitor?