hice todo al pie de la letra y simplemente no funciono, HAY alguna forma de contactarte para mostrarte. no entiendo por que se presionan 3 botones a la misma vez cuando solo debe ser 1
Gracias por el tutorial! Podrias ayudarme con algun tutorial de como montarlo/instalarlo a mi Logitech G29? He estado buscando en TH-cam como hacerlo pero aun no encuentro como. Gracias por adelantado.
Hola! La palanca funciona independientemente del volante que tengas. Si te refieres a acoplarla en la base, se lo pedí a un freelance que me imprimió la pieza a medida para mí TS-PC
@@albertoliva7954 Entiendo. Tendría que averiguar donde contactar un freelance para que me ayude en este aspecto. Ahi se me complica un poco. Gracias por la ayuda.
i have problem 1. when i press Horn = horn working but it will be lift/put Trailer (T button) as well i'm sure i set H in script + in game 2. when i wiper = game will pause and wiper work as well but game stop with pause game
@@albertoliva7954 ETS2 it is problem some slot of USB zero delay slot 1 lift/Put Trailer Slot 9 game pause (like a F1 button) slot10 stop game to menu window slot11 Horn i have check button in menu surely .it look like auto button itself it can't delete it other slot the button can instead no problem
@@diamondjing2746 do you use the same slots than me? you can check it at this point of video th-cam.com/video/VKIkLWFSkow/w-d-xo.html can you see the board? under monitor.
Hi I don’t know if this is a dumb question but those red and black wires how did you “connect” them to the indicator itself do you have to solder them on I’m new to all this but I really want to make this
Hey! The stupid questions doesn't exist 😊. The cables already have the correct connection to be plugged in the indicator and also to the board. No soldering needed.
Muy buenas, en el gamepad tester si que detecta movimiento, pero luego hago lo del joystick test y no me salen ningun numero como en el video, a que se debe? los ultimos pasos no los veo muy claros
Hey, I know i'm kinda late for party but I am about to do exactly the same thing, my question is it it possible to turn off the signal (like in most real cars) after turning the wheel?
Hey! First of all, thanks for your comment. Never it's too late ;-) regarding your question I can say "YES, BUT". I haven't done this, but the lever has a small spring inside which is able to return the lever to a rest state, thus disabling any blinker signal you may have sent. I don't think it works with the lights or wipers, just the blinker. If you can get a part that you can attach to your steering wheel and rotates in conjunction with its shaft so that it can touch the small spring in the lever when you turn the wheel, you may be able to achieve the desired effect. If you decide to implement it, it would be great if you shared your results :-) thank you!
@@onurkorkmaz22 Sure, you can start by following my tutorial and if you feel like it, you can complement it with this improvement. In the end it is not a big problem to operate the lever with your hand (as you can see I do in the video) and it makes a very natural movement. It's up to you 🙂
@@albertoliva7954 I know it isn't a big deal. I usually turn my signal off manually even while I am driving a real car but still, I'd like to implement it to my sim rig, if I can.
@@albertoliva7954 Just finished the project and it's working like a charm. Now the only and probably biggest issue of mine if finding a good model or some kind of war to mount this into my G29 wheel base and at the moment I am clueless.
Una pregunta, como conseguiste averiguar cual era cada pin de la palanca? Es que mi intención es hacer esto con una palanca de mercedes o de F150 por que estas palancas tienen intermitentes, luces y limpias todo en una. Es una pena que no haya mas proyectos de este tipo o de botoneras para aprender.
Hola! Tengo una palanca de intermitente que regresa sola la posición inicial. Me gustaría configurarlo de manera que cuando jale la palanca hacia el lado opuesto pare el intermitente (por el momento hay que jalarlo hacia el mismo lado para que pare). Seria de gran ayuda, saludos!
Hola! Gracias por tu comentario, el problema es que estamos conectando las pulsaciones de las teclas a las señales que manda la palanca. Quizás se podría modificar el script para que cuando la palanca deje de mandar la señal, se repita la última tecla pulsada. Así "pagarías" cualquier señal que mandases.
@@igorkierownik1303 thanks for your compliment. Unfortunately I can't help you. I don't have the file, and it seems to be impossible to contact the person who created the box 😣
Hi sir. I have carefully carried out all the procedures till the end. My indicator stalk and USB joystick are also working but don't know why Hotkey is not sending commands to the game. I'm in real trouble and I think I should discuss it with you in detail. Can we connect on other social media sites? I m already using 1 joystick as H shifter. A vJoy device for steering control and now its 3rd device(indicator stalk joystick). I'm totally messed in it.
@@albertoliva7954 I don't even know where i am wrong... I have installed autohot key.... I have wired up my stalk with joy and even tested its keys(working properly) and then i carefully edited the commands in ahk file... But after launching ATS... Nothing happens
@@albertoliva7954 One joystick i use for H shifter(homemade) and other joystick is actually vjoy i use for steering. So i can't give up these 2 joysticks.... And those are working good as well
@@Eloybyadn No creo que pueda hacerlo. Yo solo podría hacerte la parte electrónica, la parte de la impresión de la caja y acoplar la palanca a la base del volante tendrías que hacerlo tu. Además, si al conectarla al PC tienes problemas de conectividad no te. podría dar soporte y te habrías gastado el dinero para nada.
@@albertoliva7954 Gracias por contestar, he comprado la palanca, lo que no me queda muy claro es la parte del script, no se que hacer en esa parte del blinker, lo del notepad, lo de asignar cada boton a su tecla, como se cada boton, te lo apuntastes en un papel? o como hicistes? siento molestar tanto, pero tengo muchas dudas, gracias de antemano.
Que brutalidad que guai queda amigo, oye he creador una botonera también con una placa pero delay, pero a la hora de asignar un botón para el arranque tengo que presionarlo 4 veces(es un interruptor, subir bajar(encender), subir y bajar para apagarla, sabrías como configurarlo? Alguna aplicación para mapearlo? Gracias de antemano! un nuevo seguidor 💪
Buenas Francisco, muchas gracias a ti! Referente a lo que me cuentas, has probado a usar cualquiera de los otros puertos de la placa? Sé que según el puerto esperan una señal u otra para hacer joisticks direccionales o pulsadores. Creo que lo que necesitas conectarlo a un puerto es que espere un interruptor pulsador. Si no es eso... se me acaban las ideas :(
@@albertoliva7954 al final logré que funcionara!! Se ve que era la versión o del juego en el que lo estaba mapeando o la versión del joytokey! Gracias por responder compi!
th-cam.com/video/jVhm9MZV-tQ/w-d-xo.html Don't know if you're still looking, but here's the English tutorial that this video was based on. Also says so in the description.
hice todo al pie de la letra y simplemente no funciono, HAY alguna forma de contactarte para mostrarte. no entiendo por que se presionan 3 botones a la misma vez cuando solo debe ser 1
Did you buy that mount or make it yourself? if you bought it could you please tell me the name of it
How do you mount it in wheel?
thanks
I ask someone who has a 3D printer to make a 100% custom TS-PC support.
Gracias por el tutorial! Podrias ayudarme con algun tutorial de como montarlo/instalarlo a mi Logitech G29? He estado buscando en TH-cam como hacerlo pero aun no encuentro como. Gracias por adelantado.
Hola! La palanca funciona independientemente del volante que tengas. Si te refieres a acoplarla en la base, se lo pedí a un freelance que me imprimió la pieza a medida para mí TS-PC
@@albertoliva7954 Entiendo. Tendría que averiguar donde contactar un freelance para que me ayude en este aspecto. Ahi se me complica un poco. Gracias por la ayuda.
@@albertoliva7954 Podrias pasar los planos para la pieza? Tengo un Ts PC tambien
@@EricEBP tendrías que contactar con el freelance que contraté para que me hicera la pieza a ver por cuanto te los deja. ¿Te paso su contacto?
@@albertoliva7954 Si, pasame el contacto porfavor
i have problem
1. when i press Horn = horn working but it will be lift/put Trailer (T button) as well i'm sure i set H in script + in game
2. when i wiper = game will pause and wiper work as well but game stop with pause game
1. Check if T is set for lift/put trailer in game.
2. Check if pause is configured with same key that wiper is
@@albertoliva7954 ETS2 it is problem some slot of USB zero delay
slot 1 lift/Put Trailer
Slot 9 game pause (like a F1 button)
slot10 stop game to menu window
slot11 Horn
i have check button in menu surely .it look like auto button itself it can't delete it
other slot the button can instead no problem
@@diamondjing2746 do you use the same slots than me? you can check it at this point of video th-cam.com/video/VKIkLWFSkow/w-d-xo.html can you see the board? under monitor.
Hi I don’t know if this is a dumb question but those red and black wires how did you “connect” them to the indicator itself do you have to solder them on I’m new to all this but I really want to make this
Hey! The stupid questions doesn't exist 😊.
The cables already have the correct connection to be plugged in the indicator and also to the board.
No soldering needed.
@@albertoliva7954Damn bro thanks for the quick response you a real one gonna definitely try this out
Muy buenas, en el gamepad tester si que detecta movimiento, pero luego hago lo del joystick test y no me salen ningun numero como en el video, a que se debe? los ultimos pasos no los veo muy claros
Did everything as instructed... But Hotkey not working at all...
Hello,2.8 or 4.8mm pins?
No idea my friend. Sorry, can't help.
Hey, I know i'm kinda late for party but I am about to do exactly the same thing, my question is it it possible to turn off the signal (like in most real cars) after turning the wheel?
Hey! First of all, thanks for your comment. Never it's too late ;-) regarding your question I can say "YES, BUT". I haven't done this, but the lever has a small spring inside which is able to return the lever to a rest state, thus disabling any blinker signal you may have sent. I don't think it works with the lights or wipers, just the blinker. If you can get a part that you can attach to your steering wheel and rotates in conjunction with its shaft so that it can touch the small spring in the lever when you turn the wheel, you may be able to achieve the desired effect.
If you decide to implement it, it would be great if you shared your results :-) thank you!
@@albertoliva7954 I will need to research more and if I ever achieve this, I will share the results :)
@@onurkorkmaz22 Sure, you can start by following my tutorial and if you feel like it, you can complement it with this improvement. In the end it is not a big problem to operate the lever with your hand (as you can see I do in the video) and it makes a very natural movement. It's up to you 🙂
@@albertoliva7954 I know it isn't a big deal. I usually turn my signal off manually even while I am driving a real car but still, I'd like to implement it to my sim rig, if I can.
@@albertoliva7954 Just finished the project and it's working like a charm. Now the only and probably biggest issue of mine if finding a good model or some kind of war to mount this into my G29 wheel base and at the moment I am clueless.
Where can I download blinkerlever and joysticktest?
Are the links in description not working?
@@albertoliva7954 The links work, but which link is it?
Una pregunta, como conseguiste averiguar cual era cada pin de la palanca? Es que mi intención es hacer esto con una palanca de mercedes o de F150 por que estas palancas tienen intermitentes, luces y limpias todo en una. Es una pena que no haya mas proyectos de este tipo o de botoneras para aprender.
Busqué la datasheet de la palanca y me la leí 🙂
@@albertoliva7954 gracias
Hola! Tengo una palanca de intermitente que regresa sola la posición inicial. Me gustaría configurarlo de manera que cuando jale la palanca hacia el lado opuesto pare el intermitente (por el momento hay que jalarlo hacia el mismo lado para que pare). Seria de gran ayuda, saludos!
Hola! Gracias por tu comentario, el problema es que estamos conectando las pulsaciones de las teclas a las señales que manda la palanca.
Quizás se podría modificar el script para que cuando la palanca deje de mandar la señal, se repita la última tecla pulsada. Así "pagarías" cualquier señal que mandases.
could you please re-upload the script? the original dropbox is not working,. thank you
I will. Let me see if I have some time in the afternoon.
www.dropbox.com/s/6jcnohyemmxgah3/blinkerlever.ahk?dl=0
The Box for Blinker / Indacator you Made self?
Maybe you can send me the stl. File?
Not me. A friend. But he is unreachable now... Sorry.
Is the mounting box 3d painted, if so have you got a link to the files please? If not where is it from? Thanks!
It's maked by a friend. I have not the files, sorry
@@albertoliva7954 oh, that is a shame, I've been wondering how to nicely mount it. Thanks for your reply.
Man where is your friend to buy the stl file ?
@@Kelvin-w6s we don't know xD I wish I could give you a response but... Nobody knows.
Hi could you help me with the turn signal ? When I close it it dosnt close in the game so do you mind helping me today?
I fixed the hot key thing buttons work but where do I put the script to let it work in ETS2
You can put the script were ever you want. But you need to execute it before execute ETS
@@albertoliva7954 how to excute it? And also can I have your discord to talk to you if I had any problems? I’ll try to do it after 2 hours
@@aviationisbest8432 just double click in the script in order to execute it.
@@albertoliva7954 ok I’ll try and tell you if it worked
Nice video!!! I have one question could you send me blinker box stl.file?
@@igorkierownik1303 thanks for your compliment. Unfortunately I can't help you. I don't have the file, and it seems to be impossible to contact the person who created the box 😣
Hi sir. I have carefully carried out all the procedures till the end. My indicator stalk and USB joystick are also working but don't know why Hotkey is not sending commands to the game. I'm in real trouble and I think I should discuss it with you in detail. Can we connect on other social media sites? I m already using 1 joystick as H shifter. A vJoy device for steering control and now its 3rd device(indicator stalk joystick). I'm totally messed in it.
Hello! Can you please tell me in which step are you bolcked?
@@albertoliva7954 I don't even know where i am wrong... I have installed autohot key.... I have wired up my stalk with joy and even tested its keys(working properly) and then i carefully edited the commands in ahk file... But after launching ATS... Nothing happens
@@albertoliva7954 One joystick i use for H shifter(homemade) and other joystick is actually vjoy i use for steering. So i can't give up these 2 joysticks.... And those are working good as well
@@FaizFaizoo hace you tried using only the steering wheel and the indicator stalk without any other joystick connected?
@@FaizFaizoo make sure the script is running before launching ATS
I would like to recreate this, can you send me the file for the 3D printing part?
@@markkramper Hi, sorry but I don't have the files.
buen video, quisiera saber si vives en España?
Gracias, sí, Barcelona 🙂
Vivo en BCN y quisiera saber si podias darme precio si me lo podias hacer tu, ya que no entiedo mucho y es para regalarselo a mi hijo
@@Eloybyadn No creo que pueda hacerlo. Yo solo podría hacerte la parte electrónica, la parte de la impresión de la caja y acoplar la palanca a la base del volante tendrías que hacerlo tu. Además, si al conectarla al PC tienes problemas de conectividad no te. podría dar soporte y te habrías gastado el dinero para nada.
@@albertoliva7954 Gracias por contestar, he comprado la palanca, lo que no me queda muy claro es la parte del script, no se que hacer en esa parte del blinker, lo del notepad, lo de asignar cada boton a su tecla, como se cada boton, te lo apuntastes en un papel? o como hicistes? siento molestar tanto, pero tengo muchas dudas, gracias de antemano.
Thank you!
I don't have .ahk files.
Que brutalidad que guai queda amigo, oye he creador una botonera también con una placa pero delay, pero a la hora de asignar un botón para el arranque tengo que presionarlo 4 veces(es un interruptor, subir bajar(encender), subir y bajar para apagarla, sabrías como configurarlo? Alguna aplicación para mapearlo? Gracias de antemano! un nuevo seguidor 💪
Buenas Francisco, muchas gracias a ti! Referente a lo que me cuentas, has probado a usar cualquiera de los otros puertos de la placa? Sé que según el puerto esperan una señal u otra para hacer joisticks direccionales o pulsadores. Creo que lo que necesitas conectarlo a un puerto es que espere un interruptor pulsador. Si no es eso... se me acaban las ideas :(
@@albertoliva7954 al final logré que funcionara!! Se ve que era la versión o del juego en el que lo estaba mapeando o la versión del joytokey! Gracias por responder compi!
bro the smartest thing you can do is make the video in English. now i have to find a different tutorial..lol
You're right. It's in progress. So I will release the complete English version in few days. 😉
th-cam.com/video/jVhm9MZV-tQ/w-d-xo.html Don't know if you're still looking, but here's the English tutorial that this video was based on. Also says so in the description.
I do not understand your video since you says it in spanish