APM 2.8 Flight Controller GPS Telemetry kit
ฝัง
- เผยแพร่เมื่อ 29 ก.พ. 2016
- this video explains the contents of APM 2.8 GPS Telemetry Kit.
Get MissionPlanner, ArduiPilot Planner: firmware.ardupilot.org/
MissionPlanner, 1.3.22 is used. See screen shot snag.gy/e457nw.jpg
Get early access to my videos via Patreon and have your name mentioned at end of very videos I publish on TH-cam : robojax.com/L/?id=97
I need your help. I appreciate it.
Please subscribe to my other channel
bit.ly/2tGgYc4
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
#robojax
For all your drone and hobby needs, please visit RoboJax.com
roboJax.com - วิทยาศาสตร์และเทคโนโลยี
Is there any you can recommend a mini fpv camera that is easly compatible with apm2.8?
Why does the GPS Compass not work and the Compass on the main board only works? And when I try to calibrate the GPS/Compass it always say error
What's different between Telemetry 433 and 915 and which one is better for long range fly ?
433Mhz and 915 Mhz are frequency band ISM. The industrial, scientific and medical (ISM).. 915Mhz is used in the Americas. 433Mhz is used in Europe, Arfican and Middle east. The lower the frequency the better the range.
Could you provide any link from where the version of apm planner software which one you are using in the video can be download
I used mission Planner 1.3.22 snag.gy/e457nw.jpg and the link is added in the description.
if I don't want camera and I still need telemetry information such as coordinators and other flying information is it possible?
Yes of course. Telemetry will send you your GPS location, orientation, direction, voltage and other data.
Is the APM2.8 still relevant today, especially now that Mission Planner has moved on so far ahead while APM2.8 is stuck with the old software due to its outdated hardware..?
I have not tested it but I believe it is one of the best cost-effective options with huge features.
👍
Hello I am having APM 2.8 and the compass is not being calibrated I have tried connecting the wires of external compass to the GPS port and 12c port and also tried after connecting it with the port present at the downside of the GPS port .please help. I have removed the compass jumper in the APM .
I don't have the product in hand at the moments, but it should work. Please this page and follow ardupilot.org/copter/docs/common-compass-setup-advanced.html
how can I set up osd while telemetry is connected ?
it needs separate video. I will see if I get a chance to do it.
Dear respected sir i have same apm2.8 flight controller with flysky fs-i6 RC tx/rx . But it is not flying please please help me and guide me . Kindly i need your help
Hi, this is big question. When you say it is not flying, there could be 100s of issues.
Do you get connected via software?
When you move your sticks on the remote (Transmitter), do you see the result or change on the computer screen?
let me know and I will follow with you.
Hi can you please help me, I am having a hard time with the compass Im getting error when trying to calibrate could you help ? thanks
Hi, it would be very hard to help someone with little information. There could be 10 or reasons that it is not working.
Explain it here and other people might offer help.
thanks for the reply I have sorted it now I just installed a beta version of mission planner and it worked and the GPS calibrated .
Can we use APM board without telemetry ?
Yes you can. Telemeter is extra feature.
How much maximum distance we can fly with this kit?
on air from 100m to 300m. Regulation in countries will not allow more than that.
How can you connect and configure it for flyerwing?
Hi Plane, you follow this page: ardupilot.org/plane/docs/arduplane-setup.html
Thanks
Can I used the ardupilot 2.8 in aerial fotography 3d?
Yes you can. this could be the best option. You would use position hold to keep the drone at a point or film.
Thanks, But I'll need help... I guess.
is it avoid obstacles on it's way automatically??
NO. this is flight controller to receive command to from transmitter and control the motors. Then you need to use you computer to send commands to fly it to any GPS location you want. It cant' avoid as there is no hardware or camera to detect obstacle and avoid it.
can we add ultra sonic sensors to it to avoid obstacles?
ultrasonic sensor can be used for short distance of less than 3 meter. If you want 3 m obstacle avoidance, you can do it.
Can I power my apm without power module
yes you can. Just connect your ESC and APM gets power from it.. Power module is to know the level of battery and if you use telemetry it will display the current and voltage and also you can program the APM when the battery capacity reaches certain level, the drone can return automatically before battery runs out.
Robojax , can I have ur contact number can I WhatsApp you
I want things let me see I can buy from ur store
We are not selling locally for retail. We are in transition to education selling to schools like colleges and Universities. However we are still selling on Amazon.ca.
cost???????
it changes. so check eBay and AliExpress
you started out good, but then crashed by not giving any information on how to connect everything.
connection of wires is related to setup. So setup and connection will need
multi-part video which was not intended to be done in this video. I will
try to a have complete series of videos on APM flight controller.