Руки и инструмент! А к этому ещё и голову и вообще всё будет супер. Вот пример - ШРУСа на стопорах разжимных, не зная где должны находиться края и имея не тот инструмент сделать будет очень проблематично. А имея всё делается за 30 секунд. А те кто не понимает потом пишут "херня, пробовал, пришлось пилить"
After 20 years of learning how to use a flat block to a high degree of precision, I find blocks like that to be difficult to use, with limited applications they can be used on.
Ооодааа какой же это кайф😍 Я помню студентом проходил практику а одном автосервисе (бешенный моторы) Там занимались тюнингом российского автопрома😊 Так вот до сих пор помню какая там была везде чистота и порядок, у них было очень много всяких разных инструментов на любой случай! Это было здорово🤟
@@fightersforfreedom27,какая разница? Во-первых, ничего не поцарапается, потому что автомобильный лак очень крепкий. Во-вторых, какая разница, если это не видно под обшивкой?
If the door clip (lantern clip) is in that position, you've broken the dog housing bracket on the door. It's hardly worth removing it unless you're replacing the door card.
Perhaps you would be surprised to hear how often the manufacturer has poor castings on the clip housings, resulting in clips being left behind with an intact door card removed.
The Spanish, Chinese, English, Russian, etc all agree. Thr right tool, for the right job, makes life much easier. We all agree on at least 1 thing, lol.
I'm a mechanic, that body clip remover is better than the standard type. It works against itself instead of having to pry against the vehicle. Where can I get that?
Man, that's perfect. Didn't know there was a door alignment tool.
RIGHT! Absolutely needed one three months ago
There's a tool for everything.....
I fit mustangs for a living there's a lot of tools lmao
Doesn't it bend door hinges, like deforming metal
yes it bends the door hinges slightly, but that's the desired outcome for the repair
Something magical about watching specialized tools do their one job.
Yup. It's just 'satisfying'
The shape of the tool makes it useless for almost everything, except performing the function for which it was designed with excellence.
Never seen an old timer just sit huh😅
Yeah
It looks even more magical to see when you're used to having to improvise all the time with incorrect tools
Правильный инструмент, половина успеха
Руки и инструмент! А к этому ещё и голову и вообще всё будет супер.
Вот пример - ШРУСа на стопорах разжимных, не зная где должны находиться края и имея не тот инструмент сделать будет очень проблематично. А имея всё делается за 30 секунд. А те кто не понимает потом пишут "херня, пробовал, пришлось пилить"
А в отдельных случаях 99%.
@@nurgender2381шрусЫ.
Man aint that the truth
Nope with the right tools it tends to be more lkike 80%
As an auto body student, the sanding one is amazing
Yeah, where can I can buy it from or what is it called?
@@healthystyle FACOM CR.SBS
Yea that sanding block is awesome
After 20 years of learning how to use a flat block to a high degree of precision, I find blocks like that to be difficult to use, with limited applications they can be used on.
Delightful
Nada como tener la herramienta adecuada para cada uso. 👍👏👏
Для этого нужен отдельный склад озон
И руки,чтоб им пользоваться
For real
Ооодааа какой же это кайф😍
Я помню студентом проходил практику а одном автосервисе (бешенный моторы)
Там занимались тюнингом российского автопрома😊
Так вот до сих пор помню какая там была везде чистота и порядок, у них было очень много всяких разных инструментов на любой случай!
Это было здорово🤟
😊
That tactical car door mirror reload was pretty sick. These reload animations are looking more real every day.
É muito gratificante ver um profissional trabalhando!
I wonder why You and the "professional" aren't joined up together and turned into a herd of wild horses✨?
Why aren't You and the "✨ professional ✨" joined up together and turned into a herd of wild horses?
Dad built a door adjuster probably 30 years ago, still works great to this day
Love all these specialized tools. Especially that contouring sander
Having the right tool always makes the job easier. That being said outside of a hammer and screwdrivers I've always had to improvise the correct tool.
This brings back memories when I used to be a technician for general motors.
É o que meu avô e pai já diziam, existe a ferramenta certa pra cada tipo de serviço.
専用工具にはロマンが詰まってる
ただ、専用ツールは汎用ツールに比べ需要が低くなる為お値段が高い…。ただでさえ良い工具は高いのに…
Amen! 🙏
Нет, нам не дешевле купить новую машину 😂
You got it !
Uau! Além de preciso, foi poético!
Для фары на кайенах присоска крайне удобная 😊
real
i think too :D
xaxaxaxa
Lol that’s funny
Сейчас эти фары от Кайена никому не интересно
Work that magic gentlemen. Love seeing these cars go back to looking and working good.
This is just satisfying to watch. I love having the proper tools for the job. And body shop tools are amazing!
Мне нужна такая присоска для зеркал, пойду на парковку деньги зарабатывать.
Обычную купи для переноса и установки стекол 300р
Трёху можно заработать...
@@pavelvoronov2442 а можно и инвалидность заработать)
Тут как "повезёт"..
@@pavelvoronov2442за зеркала не более 2. Еще и доказать нужно будет
Пробовал по работе, 10% может и снимется.
У клипс так же великолепно отлетают шляпки 9))
Металом по фарбі👍🏻
Я бокорезами цепляю и вынимаю, ничего не вылетает. Правда у меня тойота 2000 года.
@@fightersforfreedom27,какая разница?
Во-первых, ничего не поцарапается, потому что автомобильный лак очень крепкий. Во-вторых, какая разница, если это не видно под обшивкой?
@@user-by9di9yv2tбудет ржаветь
This was a pleasure to watch, I love innovative tools! 💪😁👍
And as always, the correct tool used in the right way makes life amazingly easy
Boa noite !!!!!!
Realmente, a ferramenta certa faz o serviço ficar mais fácil.
Obrigado pelo vídeo e parabéns pelo canal.
Abraço do Brasil.
А где ссылка на инструмент???!
А должна быть?
У Алиски спроси.
Это же выпендрёжный контент, а не просветительский или рекламный.
Having the right tool for the job makes all the difference
Хороший инструмент и знания, залог успеха)!
Брусок зачёт,где купить?
Нафига? Подложи между рукой и абразивом губку для посуды или тупо тряпку - будет намного лучше.
В центре нагрузка больше, бесполезная вещь
Competente 👍
Ferramenta correta pra serviço específico. 😮
Excelentes herramientas ❤
Esa " L " de tiro de succión es de la empresa MARTECH se llama Fast Puller.
If the door clip (lantern clip) is in that position, you've broken the dog housing bracket on the door. It's hardly worth removing it unless you're replacing the door card.
Hold up what?
@@evandiamond421 what?
Perhaps you would be surprised to hear how often the manufacturer has poor castings on the clip housings, resulting in clips being left behind with an intact door card removed.
Sometimes, but most often not
@tintshady2049 I guess but depends on the material. It'll be mangled in any case.
Sensacional essas ferramentas 😊
Eso pasa cuando tienes las herramientas adecuadas, excelente!
Profissional sem a ferramenta certa, é um mero mortal…
Continua sendo um mero mortal, mas com ferramenta
Единственная годная штука править дверь, а колодка это вообще шедевр говна с ней ни когда не сделаешь форму
Это не сильно поможет, на видео даже дверь не закрылась😅😅😅
This is such an amazing talent!!!! So many tricks, tools to get this done. Personally ive never seen the door or sanding tool.
かなり工夫された技術ですね(^^)✨
色々考えてますからさすがです(_ _)✨
Bien se dice "no hay que trabajar más duro, sino más inteligente"
prático 👍👍
Always great to use the right tool for the job.
A proper tool gives a proper job. Thanks for sharing.
Ну бруск гибкий тема 👌💯🤔
Мне тоже очень понравился. Теперь ищу где его купить
Я думаю, что узнав о его цене в 25 тысяч рублей, Вы продолжите обычными тереть.)))
Так гибкий оближет бугорок из шпатлевки.. он не работает)
Trabalho tranquilo 😊
What baffled me was how specific the items were to preform the repair. It must cost quite a bit have these tools in shop.
Thanks so much for the side mirror one!! I wanted to take a look behind the mirror to diagnose an issue but didn’t know how.
تحياتي لك. ايها المخترع ❤من جزائري
Nada como ter a ferramenta correta para execução perfeita do trabalho.
Esse lixador manual é perfeito.
This is artistic work these guys do!Love the door alignment tool.
Right tools is everything !!!!
As a motorcyclist I will definitely be buying one of these
С каждым годом всё больше и больше приспособ для более удобной и бы строй работы в автомалярном деле. Круто!
Lindas herramientas
I love how everything is easy with the correct tool.
Yeah, work smarter not harder. Using the right tools is a huge part of that philosophy. 👍
I actually have one or two of these, can speak as a car audio guy the clip remover tool is amazing for all kinds of retainer clips in/on vehicles
Oooooh useful gadgets. Very fancy
La herramienta es la mejor de las inversiones. Los bienes solucionan los males.
I too take my door alignment tool and press it against the paint corner very hard. Yes, very good for paint.
These are awesome tools! 🤯
This is what you call the right tool for the right job👍
That flexible sanding pad was dope wish I had that restoring my grandpas car
Having the right tools always makes the job easier.
The door alignment tool is the bomb… I might have to make one now myself
That door bar tool is too familiar. I used it at the time when working at the EV plant.
The Spanish, Chinese, English, Russian, etc all agree. Thr right tool, for the right job, makes life much easier. We all agree on at least 1 thing, lol.
Right tool for the right job makes things so much easier
Хорошо когда в мастерской есть все нужные и очень необходимые инструменты
Nothing like the right tool for the job.
That's cool.
Thank you for the door hinge tool, didn’t know that existed, just ordered one
There's nothing like having the right tool for the right job😊
Thus is the first time I've ever felt the ....
"So satisfying" sensation from a video!
Absolute art work
These are guys that love doing their job. You’re not gonna get this kind of care 2/3 of the time.
One of my favorite bosses told me. There is nothing like having the right tool for the job.
便利な工具が増えたね。😊
Cars are awesome and the professionals who can fix them with no problems are awesomer
Love the right tools for the right job
That sander!! Would save me a month!!
really dig watching human ingenuity
All these tools do satisfying work
Muito top trabalho de qualidade
Having the proper tools for the job, saves time and money, keep stress at bay and profits rolling in.
Nada como a ferramenta certa!
Это выглядит чудом 😍
It’s all about having the right tools.
Aqui no Brasil todas as ferramentas de ajuste se resumem num martelo😅
The right tools for the job is so satisfying
Cool tools I could use them all.😎
I need that fender puller. 😊
Buenisimas yo ni sabia que existían las herramientas para eso
Works 60% of time every time!
Oh my God!! That door lifter!!!❤❤❤
Trabalho certo, com a ferramenta certa.
Dude... so much satisfying mechanics tools?? This id a dream come true video....
Algunas las conocía, como la garlopa, o ese quita grapas del principio, pero otras no las había visto nunca
Trabalha com essas ferramentas que deve ser maravilhoso lkķk
Alright these are very cool and useful
Right tool for the job.
I don't think I've ever seen half of these tools though.
I'm a mechanic, that body clip remover is better than the standard type. It works against itself instead of having to pry against the vehicle. Where can I get that?
Good to have the right tools for the job
أدوات رائعة