How To Operate The Yaesu FT3DR, Menu Setup and Programming
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Its time, lets go through the FT3DR and get it setup for analog and digital repeaters, APRS and other fun things. I will also cover manual and computer programming.
100k subs 7300 giveaway: • 100k Subs THANK YOU! ...
TH-camrs HamFest! • TH-camrs Hamfest 2020
Spirit Morse Key: www.kickstarte...
HRCC Podcast: podcasts.apple... (drop a rating please!)
Links to products in the video: www.amazon.com...
As an Amazon Associate I earn from qualifying purchases.
archive.org/de...
Help support the Ham Radio Crash Course:
/ hoshnasi
Current Shack Config:
ICOM 7300: amzn.to/2sVdpOq
ICOM 2730a: amzn.to/2JqrASg
MFJ-4230DMP: www.mfjenterpri...
Souncloud................► / hoshnasi
Discord.....................► / discord
Facebook.................►goo.gl/cv5rEQ
Twitter......................► / hoshnasi
Instagram.................► / hoshnasi
SnapChat..................► @Hoshnasi
Companies can send demo products to: Josh Nass P.O Box 5101 Cerritos, Ca. 90703-5101
For those of you arriving late to this party, like me, this may help cut to the chase since there is no table of contents:
15:26 - First actual discussion of FT3DR.
17:32 - Set and store a frequency.
19:20 - Show single channel.
19:40 - Set up tones for repeater.
23:37 - Repeater offset - +/-.
25:24 - APRS.
27:40 - Wider bands FMW.
29:15 - AM band select.
29:33 - SW bands (listen only).
29:54 - Air band scanning.
32:24 - Programming with SCU 19 cable.
44:20 - Save to/load from SD card (32gb).
59:00 - APRS.
1:07:52 - Bandscope.
1:10:18 - Record audio to SD card.
1:11:00 - Backup/restore to/from SD.
1:17:42 - Wires X.
1:26:45 - Yaesu system fusion vs Wires X.
1:27:55 - GM feature.
If any errors, let me know and I will edit.
Subscribed newby and grateful to Josh for all his hard work. Suggestion: consider different color scheme for scrolling text, and attention to the background. I can't make out names/call signs as it is, for over half the video.
Also for any TH-camrs who may not know, if you click on the 3 dots at upper right of the video, you get a list of settings. You can speed up or slow down the video. Personally I find 1.25x and 1.5x very useful to get through the non-substantive portions of videos. You can also double tap on the left or right side of the video to backup or advance the video in 10 second increments while viewing.
Thanks again!
ATB!
Holy crap, I can't believe I didn't know about the 10 second increment thing! Thank you sir!
Thanks…. You tried (successfully) to make sense of this very discombobulated video!
Thanks. I've had my Yaesu FT 60 for probably more than 6 years but never used it. I attempted to join a ham club but there was not one nearby or convenient. This hrcc will really reignite my interest. Thanks for offering this.
Thank you for this video. Just passed my Tech test yesterday and saw another video of yours on radios for newbies. Then saw this and decided this is the first radio for me.
I grabbed the FT3DR earlier this month and I'm really enjoying it. Very easy to learn (I'm brand new to HAM), program and operate. After just a couple of days with it, I can confidently navigate the menus and access my numerous programmed memory banks. Still waiting on my callsign unfortunately. Having a great time listening and learning the radio in the mean time.
👍 that’s great!
What did you enter for a call sign to listen? I’m still waiting on my call sign. Can you change the call sign later if you enter something else to listen or once I get my real call sign?
David Byrum If you factory reset it, it’ll prompt you to enter your call, just put 00000. Otherwise just hold the DISP button to get into the settings and select CALLSIGN and you can enter it there.
That is some radio, wow. I'm digging the Yaesu stuff.
I did not know that it was World Amateur Radio Day!
Feels good knowing I set up my newly acquired FT-7900, and got some help setting up a GD-77 and the DMR hotspot I put into mothballs a year ago.
All working!
Say in safe, stay in sane.
73 de N2NLQ
100K subscribers? No hams on the air. They all are on TH-cam looking to see what is going on.
Looking to get this radio very soon. Great content as always!
Keep up the amazing content!
Thanks for doing this.
what antenna do you recommend for the ft3dr? what do you run on your ft3dr? By the way... love the channel.
I use a signal stick on mine. Tbh, the rubber ducky wasn't terrible. I did add a BNC adapter though. Much easier on the radio if you're taking it on and off a lot.
I build & race cars, I'm also a pilot, operating one of these is more complicated than anything I do. Talk about over engineered & complicated!
Edit edit edit: Ok I have learned A LOT. I still don't know why frequencies are "unusual." This is a fun little radio!
Q: Do you have to have the frequencies programed before they are detectable on the band scope, or can you use the bands cope to search for and discover frequencys to save?
FYI If anyone ever has a problem where the screen is lit but blank. there is a very hard to see switch next to the data port that more than likely you bumped in some way. I had this problem a couple days ago, and you can imagine how upset i was till i talked to a tech at Yaesu today. hope nobody needs this info but if you do here it is.
Bruuuuuuh I'm waiting on my ft3d to come in the mail and I don't want to look entirely clueless pulling it out of the box... To myself... I dunno lol. Great vid josh!
I learn so much more seeing you guys figure the stuff out
Ok, I was worried I would lose some of the organization I have with my 878 and DMR. In my mind I can use banks like a have with zones on DMR. Awesome sauce
Hi Josh. I’ve heard you on a repeater from my home in Prescott Valley. Great callsign. .
Dave N7NRE
We’re you connected to our HRCC talkgroup?
I was struggling with my new FT3D [three weeks old] but with this video I'm getting closer to actually using it. Downloaded the FT Systems software tonight - the cable is on the way - but I may try the SD card route - I successfully formatted a 32G micro SD and have it in the radio. Thanks as always for the education.
Thank you for watching Kevin!
If you don't have a license yet can you still power the FT3DR up and listen since you don't have a Call Sign to enter at start up?
You don’t need to lower power. Just don’t transmit. Use 00000 to start it up. You need to add the call when you get licensed.
@@HamRadioCrashCourse Thank you and thank you for your videos
You need a certified technician to operate this HT. The owners manual is a cluster and it reminds me a lot of programming a Baofeng because it is a cluster as well without a computer.
Wow. I am a super newbie some I’m like “ok, I got the cardboard box open. What next?” LOL
So attach antenna before turning on. Don’t turn on yet. Charge battery full first. This is how you charge it. Ok got it
If your pi-star is transmitting you won't be able to join a different channel until there is a break in TX, and the radio can talk to the pi-star to change the "room". It worked for joining cq-uk because there was a break, when you hit the americalink channel the radio was receiving which meant your pi-star was transmitting and not listening. And thanks Josh, you cost me some money with a pi-start hotspot and a new ft3dr. :)
P.pPpp
Getting ready to do my studies for my Armature Radio License. I'm super excited about this new journey. Have watched a couple videos with you in it my friend. Thank you for the information in these videos. Makes me feel more confident about passing this first level of tests.
How did it go?
I just got my FT-3DR today and pushed my first programming setup to the radio. I’ll be testing it out for the first time tomorrow.
This is my first “real” radio other than a Baofeng, so I’m excited to start learning about APRS and YSF.
I have one I’m selling for a friend who just became a silent key and it is a piece of crap in my opinion I would not on it if it were free.
Just passed my tech license yesterday Sunday and am excited to get into the hobby!
Congrats!
Best advice was not to jump into higher priced equipment because by the time you have grown the knowledge to really use it in the future there will be better radios and improvements and that would be the time to spend the extra money, saved me some expense with first radio, really appreciate it!
My very first radio was the VX-7R over 13 years ago, and the radio was so advanced and easy to use that it helped accelerate the learning curve. It was worth it, and just today I ordered a FT3RD as an upgrade, but not a replacement. I have am all for buying the best you can afford because I got a lot of value out of doing that.
I went FT60R- VX6R and now thinking about the FT3R and I still have not been able to get my Tech-General because of CV test suspension. Some bad reviews of FT3R is it worth it over the 2 I already have?
@@skyscratcher8825 I would say YES, only because none of your other two radios are DUAL VFO (dual band yes, but NOT dual VFO). Personally I find that to be a HUGE feature and I use it all the time. Its literally like having two separates radios in one. I have my own crossband repeater and home and with Dual VFO, it simplifies TX/RX needs when operating a local x-band repeater since there is no way to provide a TX shift on the same band. Even useful if its something simple as using talking to someone simplex during a card ride, and monitoring a repeater at the same time in case you go out of range. I wont own anything less than a Dual VFO radio. It doesn't have to be the FT-3DR, but that's the main reason I would pick it over the two you have.
I'm brand new to HAM and bought the FT3DR not too long ago. After about 3 days of tinkering, it's programed into 6 memory banks, I can quickly access the scope, memory functions, APRS, and digital. It's a very easy HT to learn and I love it.
Does the Yeasu sw write to the SD card ?
Going to change the question pool for the EXTRA class license? Where do I get a list of questions that are on current test for all three? I have been studying back and fourth between the 3 test randomly. But if there is copies of current test questions? I would love to know those. :)
I am relatively new to Ham radio, and upgraded my HT to an FT3. This video has been EXTREMELY HELPFUL. Thanks so much, Josh!
I think I'm going to be watching this a couple of times to learn to work my new FT3DR.
I hope it helps!
Just bought an FT-3DR, and have a question - My volume knob (the lower larger one) wobbles a bit. Seems looser than it should be. Is this normal for this HT? Thanks!
Will the FT3DR allow monitoring only for new test passers waiting on data base display? If so what if anything do you enter when you boot up the radio? Thanks for your help; anyone?
Hi, I'll set the correct time on my radio. But once shut off, it reverts back to a 5 hour time differential. Example-if I set the time at 6:15, it will go to 10:15 if I shut off the radio and turn it back on. Help
Thanks for the informative videos Josh!
Just in case anyone was wondering the significance of the hyphen between your callsign and SSID: it is not a negative number as he states in the video, it's just a hyphen to distinguish it from your callsign. I'm sure he was just trying to say hyphen, but I wouldn't want anyone to think that hyphen has any significance to the APRS system beyond what I stated above.
Great timing for this video. Just passed my tech exam last night thanks to the HRCC/GLAARG remote session. Just picked up an FT-3DR at my local HRO.
Congrats! And great pick on the radio. Money well spent.
i very un happy how greed is taking over ham radio all the cheap skate buying the boa Feng radio and the top 3 has done nothing about it wait until boa feng comes out with a dual bander with side band the tight wads will buy them the poor be suck into buying them the tope 3 at least come out with a mono bander with side band take the sale away from the boa feng and other cheap model
My question is: Is the FT3DR approx. $400 better than a Baofeng UV-5RE? And Why? Asking for a friend.
Thanks for all the great information you've shared over the past years. I've learned so much from you. Question on this one: at 36:26 you're showing the repeater book search, which I have now opened up using version 6.2.6 of FT-3D Programmer from RT Systems, but my window does not have a colored column header bar, and I cannot sort by clicking on "Repeater Notes". Is there an obvious reason this would happen?
Is APRS still a thing? I heard the guy died and destroyed the code. Also when I had tried it it kept pinging the repeater and they didn't like it. So what are suppose to connect to and ping your locatio and stuff?
Just got this one and at ground level ....starting Ham Hobby...woo hoo!
I just got it too, and I have no idea about radios , did you find it easy to program it ?
Hey ! I buy one ! It's your fault ;) any recommandation for the antenna ? ( I will use 430-446mhz and scan the rest) thanks for the videos which allow me to come back to this hobby :)
Paul Harrell is the man. I am looking for a HT but I want it to be made in a country that does not have a habit of suppressing technology when it suits them. I am looking for a radio that will continue to work after the PRC have shut down all other forms of communication, can any one recommend a HT not made in the PRC? Thanks in advance.
The radio in the video is made in Japan.
Also, I think Paul Harrell is great.
@@HamRadioCrashCourse Thanks man I was hoping it was still made in Japan. You rock.
This is great
How is this compared to the vx 6r in terms of the analog capabilities?
Just got the FT3DR. Love the video. It helped out a lot.
Would be cool to see a demo of the ability of its GPS in navigation. Finding others and backtracking.
@@USMichigunPrepper If only to see and understand the practicality of it as a spare piece of gear/technology if a primary GPS or compass were to fail.
@@USMichigunPrepper FWIW, GPS is a positioning system. It tells you where you are. Navigation is something you do WITH a GPS coordinate.
If you want a radio that does navigation as well, they are $1000+. But seriously, you're better off spending $400-$600 on a handheld nav and using a separate radio. It would suck to have both on one unit. You'd need a battery the size of Texas to keep it operational.
@@nilpo I probably missed this (these are SOOO long, even played back at 1.25x or 1.5x), but is there a way to toggle gps send on/off with this radio? Thank you!
@@johnbauman4005 Yes. It's not configured by default. You can also turn it off in the menu. Long press Disp and I believe it's the center menu on the bottom row. Sorry, I don't have the radio in front of me at the moment.
@@nilpo Thank you sir! Much appreciated. ATB!
Josh, will all the procedures in this video for FT3DR will these procedures work with the FT5DR that I have just bought???? Thank you for your videos you are one of the best teachers on Ham Radio on TH-cam!!!
Most likely yes.
Hi there!... Thanks for a great video!... I've just ordered a shiny beautiful FT3DE (UK) but still haven't passed my Foundation Licence... (a few more weeks...) Can I still turn it on as a listen-only device?... Can you bypass / enter a temporary call-sign?... In advance, thank you very much for your time. 73
00000
@@HamRadioCrashCourse ...it was THAT simple!!!... 🤣 ...all my apologies, I must be very tired... Anyway, THANK YOU and have a nice evening!... 👍🏻
So can I program it on a Mac book Catalina ?
Almost ready to take my tech test.. I like the yeasu FD3 DR..but I am in the house most of the time ( I'm old) can you connect an antenna that will mounted outside..I live in a mobile home in a valley (vt) or look for a mobile or base? Something comparable to the FD 3.
can't afford $1000.00 + radio..thanks I learned alot front channel..
Please quit the supper chats. No one cares.
Just have to add this......and not meant to be "that guy" but some that watched may be put off by the problem. So, did you figure out that you were clicking ok before clicking receive? Needed to tell the radio what it was doing, before doing it.
I am considering buying this Radio. I already have the VX-6 and FT-70, both each with it's programing cable, from RT Systems. Do I need to purchase a new programing cable to work with the FT3D or can I use one of these cables?
I don't want to be starting any "Digital cola wars" of HTs however, I will be getting BOTH this radio and the AT-D878UVII Plus. Everything is set for me to get the FT3ER on Friday and the other one the following month
Do I still need to watch the FT2 video to understand my FT5DR
They are similar. But I have videos the ft5 too.
Can these radios be used as police scanners as well?
Yes, but not as effective as a scanner as a proper scanner is. Further, this doesn’t do p25
I got mine in February, at a discount because open-box, a couple of weeks before passing the Technician exam (studying for General now). I EDC it with a Signal Stick antenna, which I tie in a loop when I put it away at work. Thanks for the video! KN6NPZ, 73
will this transmit on 161.100 mhz
Thanks much. Been with the VX-6 for a long time. Stumbled across your channel and have the FT3D on the way. Im prepared via your video. Liked and sub’d
With a little extra effort, you can program any HT with CHIRP, rather than spend an average $50 more for software and a proprietary cable from RT Systems.
Does anyone know well this radio (FT3DR) receives AM radio and SW with the rubber duck? I have a FM VX-3R that actually does well with the stock duck.
Nice looking radio. Maybe it could be an upgrade from my Baofeng UV-5R.
That's what I did. My UV-5R doesn't get any love anymore.
My plan
Hi! Could you do a fast test for me? to input 27.225mhz and set the receive mode to FM? I need a confirmation that this works since it's a deal breaker in buying this ht and there's no shop near me that has it in stock to do a real life test
Paul Harrell is the man. I am looking for a HT but I want it to be made in a country that does not have a habit of suppressing technology when it suits them. I am looking for a radio that will continue to work after the PRC have shut down all other forms of communication, can any one recommend a HT not made in the PRC? Thanks in advance.
Thanks for the informational video well done. I would like to know if anybody knows how to dial up a irlp repeater using a Yaesu ft3d? No key pad for dialing? I would love to figure it out. Thanks
Just got my fr3dr. Thank you for the vid. Got on my repeater today. How do you shut the display when it’s on standby. Thank you
Question: are you related to joe and John nass,.. that used to live I. St. Joseph, mo
I don’t know.
Does the RT software for SD card download via site no cable needed as i read it. Does it have all the frequency channels available for me to thumb through or must I add them manually on the spreadsheet?
I have a yaesu ft 70r I love it
Is the battery life as bad as everyone says? I have thought about buying one to upgrade from my Baofeng.
At 28:30, you have to enter three digits to get the dot in the right place. My favorite over-the-air FM station here in Dallas, TX is KLUV, 98.7. I enter it as 0987 and the decimal will be correct.
KC3QAC here, I am frustrated because I’ve gone through all the setup steps but APRS pro refuses to acknowledge my beacon and mark my location on the map! 73 de Tom
Problem - only chirp can copy repeaters from the internet! and I find this invaluable!
RTSystems software can do that too.
@@HamRadioCrashCourse - Yeah but I am cheap! :)
Cool I'm looking for one
Turned a 45 minute video into an hour and fifty four minute video... Great! Have another beer.
Most awesome demo. Watch say how easy it is followed by not knowing what to do. This is super.
Instead of sorting by the notes you can choose to only see 2m and 70cm by the search bar at the bottom center of the RT screen.
Forgive me a silly question, but what is the character limit for displaying a channel name?
What cable do I need to be able to program the ft3dr?
Usb a ton usb mini.
What antenna are you using there for the APRS?
On the radio I almost always use Signal Stuff Signal Stick antennas. signalstuff.com/?ref=622
Mine will not "read from SD card". When I push that it does nothing. It's a new SD card and I even formatted it beforehand too. Anyone have any ideas? Thanks.
Did you use the radio to format?
@Ham Radio Crash Course yes I did and it said it was successful. Then when I put the SD card back in the computer all the channels are gone. I kind of suck at this stuff and I can't figure it out. I save it to the card but it just isn't working and I can't find any info on it.
I’d format on the radio. Then use the Yaesu software or RTSystems to load channels. Then put in radio and load.
Sorry didn't get notified that you responded. Just checked and saw that.
Thats what I tried to do. It's probably too complicated to message about but thanks for the help anyway.
Someone said this was easier than DMR. But this looks way more complecated than DMR.
It’s easier.
@@HamRadioCrashCourse Must just be the myriad of features! Well guess I'm going to have to get one (Said every Ham ever) lol! Great video by the way.
@@arlo12345678910 agree. Many features are rewarding if you put the time to learning and exploring
@@MrTonyd1954 Learning and expoloring is what it's all about! 73!
Thanks for the video! Helped familiarize me with the FT3DR in places where I had questions...
Can you get the FT3dr to work with APRS DROID? Or would you still need a TNC for that? Thanks!
I wanted to buy an Icom but I think the ID52 fell short of the mark in relation to this and the time to buy is now.
What is the aunt. that your holding. KJ6WYU
Hello from k2csx mark in lockdown new York city
If you purchase the RTS Software for Mac (Download version), program and then save to Micro SD- Can the saved frequencies be uploaded to radio from card port after installation? (would avoid buying cable) ?
Hello...can you listen to shortwave on this radio..lsb usb?
Shortwave yes. As it will tune shortwave frequencies. But the mode of operation is only AM.
If I don't have a call sign yet, how do I bypass the prompt?(Yes, I understand that I'm not allowed to transmit, including kerchunking.)
just plug whatever in, it does not really matter unless you are using the APRS or transmitting on a digital mode. You can always change it in the menu too when you get your license.
like the look of this but isn't the functionality of the id51a with nearest dstar repeater finder better
Maybe in that specific aspect sure. But the ft3dr does more.
Both radios have their pros and cons. That’s why I have both. I love the touch screen and extra features of the yeasu. I also like the if-51 for its menu system design. Can’t go wrong with either radio. Great investments, addictive hobby
Are there any base stations that aren't 4 grand with a built in power supply?
No. Most ham radios do not have built in supplies. Further, you don’t really want that anyways.
Is software cable necessary( any advantages over SD?) or SD card is just fine for RT Systems?
Need Clone / Receive Goes to "wait" then hit OK
how do you set up full duplex mode on the FT3DR. Cant find anything in their manual to do this. Trying to setup for satellite work
The fr3dr does not do full duplex.
Thanks Josh great video 👍👍👍
Is there a 12 volt charger option for this, for traveling,that I can charge with solar or cigarette lighter?
Got a question I have an old tv antenna that sits on Top of a tower On my property is there a way to rig that to use for a ham radio?
Haha... Only one way to find out!
probably not, the feed line is like 75 ohms, versus 50 ohms.
So with the RT software do I actually need different saofrtware for each of my radios .... i have a ftd3dr and a ftm-400x
Yes, it is a different software for the mobile and the HT.
Any reason not to use CHIRP?
If CHIRP can program it, sure.
Thanks Josh, I appreciated
Om my, I have to look forward to the car warranty people finding my on radio too.