Thank you for the very clear explanation, my husband was very happy with the result. fri gr Sil from the Netherlands - Dank je wel voor de zeer duidelijke uitleg, mijn man was heel erg blij met het resultaat. vr gr Sil uit Nederland.
Thanks man. I tried not to reverse it after the loop, and a realized it started to spiral around itself. Didn't look great but that might be useful to know.
@@cullenduplechin3889 One end has a split ring that is attached to my pouch and the other end has a swiveling spring clip on it. and I made the lanyard long enough that I can put it through a couple rolls of electrical tape then clip the spring clip onto the split ring.
Hello, I made your paracord keychain with carabiner after watching your excellent TH-cam video. It looks AMAZING! 👍🏻 I cast the para cord on the split key ring with individual loops as instructed, but I now cannot freely twist the key ring around 365° because those open parts of the key ring get caught on the Paracord loops. Am I twisting the key ring inappropriately, did I tighten those initial 2 Loops Way too hard or tight or is there something else I might be having a problem with or done wrong? Thank you, Brad
Hello, I love this carabiner except the key ring gets stuck in the two loops that originally were put onto it and I can’t twist it 365° around to put keys on because they get caught on those two loops evidently because I tightened it when I originally put them on can you please give me some advice on how to free the key ring all the way around 365 and/or other ring or rings I need to buy to accommodate for this to hang each key on?
Vc deveria ter colocado no vídeo, as medidas das cordas e a distância da dobra entre o mosquetão e a argola; assim ficaria o tutorial mais didático.🤔. Rio de Janeiro.Brasil.🇧🇷
Hello, you need to make the knots rotational: one time you start from the left side and for the next knot you start from the right side, then again left, right... otherwise it twists really like a DNA... but this is another Paracord procect: th-cam.com/video/P1dTAEbGtDk/w-d-xo.html
Yeah I know... it is a little bit tricky to follow a youtube tutorial, i am sorry that I couldn´t do it better, so that everyone can follow the steps I am showing.
Thank you for the very clear explanation, my husband was very happy with the result. fri gr Sil from the Netherlands - Dank je wel voor de zeer duidelijke uitleg, mijn man was heel erg blij met het resultaat. vr gr Sil uit Nederland.
All I needed, brilliant and straight forward, managed one in a few mins, once you get going..... Boom :)
Thanks...followed your directions and made a nice lanyard in a couple of minutes
The instructions are very easy to follow, thank you!
Just started my first cord keyring, thanks so much 👍
Glad to hear that! Thank you for watching the video!
Thank You for the video. Thank for the measurement in inches. Fun video.
Thank you for watching :-)
Thank you Sir for this video... i successfully made myself n my friends a few paracord keychain based on ur vidz.. 👍👍🤲
Wanted a quick and easy craft for Veterans at the VA. Thanks. Good Instruction......
Thank you very much for that positive feedback!
Awesome job at description. Thank you. 😊
Nice..i will try to make mine..thank you..for sharing your talent..
Just made one of these for my EDC, thank you for the tutorial
Thank you so much. Great video and you went slow enough that my first ever paracord keychain looks great.
:-) Glad to hear that! Thank you very much for your comment!
thanks, me and my son now have a matching key chain.
Nice ... they are very useful, right ?
You are the best in making stuff I thank you from my heart thanks
Nice. Thanks for the WIDEO
Thank you for the feedback!
Thank for the help.
Thanks man. I tried not to reverse it after the loop, and a realized it started to spiral around itself. Didn't look great but that might be useful to know.
Easy to understand and quick, cheers!
Thank you for this positive Feedback!
Got it on the 6th attempt looks great thank you
Very 👌 nice, thanks 🙏
Nice! Made myself a slick tape roll holder for my tool pouch.
Nice!
How are you doing it
@@cullenduplechin3889 One end has a split ring that is attached to my pouch and the other end has a swiveling spring clip on it. and I made the lanyard long enough that I can put it through a couple rolls of electrical tape then clip the spring clip onto the split ring.
thank you for the tip on what side to start the loop on
Thank you for watching :-)
Don’t be this guy and tie the key chain or the carabiner to tight or you’ll never get a key on the hoop
Gostei do vídeo
Видео прикольное, для тех по английски не говорит,было бы не плохо размеры написать, а так супер
Hello,
I made your paracord keychain with carabiner after watching your excellent TH-cam video.
It looks AMAZING!
👍🏻
I cast the para cord on the split key ring with individual loops as instructed, but I now cannot freely twist the key ring around 365° because those open parts of the key ring get caught on the Paracord loops.
Am I twisting the key ring inappropriately, did I tighten those initial 2 Loops Way too hard or tight or is there something else I might be having a problem with or done wrong?
Thank you,
Brad
Thanka dude
Excelente me encanta
Hello, I love this carabiner except the key ring gets stuck in the two loops that originally were put onto it and I can’t twist it 365° around to put keys on because they get caught on those two loops evidently because I tightened it when I originally put them on can you please give me some advice on how to free the key ring all the way around 365 and/or other ring or rings I need to buy to accommodate for this to hang each key on?
How do I know what length the paracord should be to get the result I want?
Trims vidio tutorialnyo ngaB ⭐⭐⭐⭐⭐
Well done, thank you!
Thank you for watching!
thanks man👍
You´re welcome :-)
Great video! How much rope did you use?
5 ft and 3 inches ... or 160cm :-)
Vc deveria ter colocado no vídeo, as medidas das cordas e a distância da dobra entre o mosquetão e a argola; assim ficaria o tutorial mais didático.🤔. Rio de Janeiro.Brasil.🇧🇷
thanks !
Glad to help :-)
Very good
Thank you!
Excellent tutorial thank you. Can you tell me if the paracord you use is 550?
Hello,
thank you for your comment;
yes, I use the normal Paracord 550.
thank you very much great vid i subsribed and liked the vid thanks a gain
Ty very much ... I am glad that you like my video :-)
How would you add a dog tag in this middle of this?
it is a good tutorial and very practical to use!
Thank you!
Heinrich Dieter ๅๅ
Como se llama el hilo
What is the mm of paracord thread?
Hello, it is 4mm.
Where do you get the Cavia and key ring?
I got them from amazon.
Can someone explain me why mine alwys twists around itself like a DNA?
Hello, you need to make the knots rotational: one time you start from the left side and for the next knot you start from the right side, then again left, right... otherwise it twists really like a DNA... but this is another Paracord procect: th-cam.com/video/P1dTAEbGtDk/w-d-xo.html
Such a great video. So easy to follow. Question: what size is your carabiner? 2"? Thanks!
Thank you very much!
The size of the carabiner i used is 6cm, that are about 2.4".
OK. Thanks! I thought it looked smaller than the 3".
What size para cord please
whatever size you want then you clip it at the end, did you even pay attention?
Er du Dansk? 😊
Who is the other person there, as you keep referring to 'we'? just curious
well you, the person who watches the video :-)
Never seen a carabiner made out of paracord... oh wait I still don't... ??
lay off the weed bro
call me an idiot but i couldnt follow or see what he was doing
Yeah I know... it is a little bit tricky to follow a youtube tutorial, i am sorry that I couldn´t do it better, so that everyone can follow the steps I am showing.
Set the speed at 0,5 !!!
This video sucks!!! Cant figure it out!
Easy to understand and quick, cheers!