I've owned this case for a while now, have sat in front of it almost every day since building in it... and never knew it had a protective peel on the glass.
I wouldn’t have noticed it either had the white instruction sticker not torn a small fragment of it off when I peeled it. The protective peel was incredibly difficult and unsatisfying to remove.
guys i read on some Chinese forums to know that is actually a explosion proof film. you are not supposed to remove it and that’s prob why it’s so hard to remove 😂
@@subliminalbanana2442 the three vertical fans are reverse bladed fans that came with the case, so they are intaking. So 4 intake and 4 exhaust in this build.
@@SM_Higgs The case comes with 4, 3 reverse flow and 1 normal. It appears the fans can't be bought separately as of yet, or weren't the last time I checked.
I have the same case and I want to buy the JONSBO-SL120, are they good fans and is there a good airflow because currently with other temporary fans (I have only 3 in total) my CPU is a little too hot.
Generally, the top is for exhaust. Adding a filter there only helps keep any dust inside, possibly clogging the entire vent and retaining all the heat. If the holes on the panel where the fans are intaking are are small enough [and it has good porosity], you wouldn't want a filter there either because the holes are small enough to keep out larger dust particles. Adding a filter at that point would impede airflow.
Ummm....I'm pretty sure that nice CPU watercooling block is supposed to cover the CPU completely. Oh, and I'm also pretty sure the hoses from that same nice CPU watercooling block are not supposed to block the PCI slot. Is this your first time?😂
I've owned this case for a while now, have sat in front of it almost every day since building in it... and never knew it had a protective peel on the glass.
I wouldn’t have noticed it either had the white instruction sticker not torn a small fragment of it off when I peeled it. The protective peel was incredibly difficult and unsatisfying to remove.
guys i read on some Chinese forums to know that is actually a explosion proof film. you are not supposed to remove it and that’s prob why it’s so hard to remove 😂
@@madkeeb🤣
does it come with 4 fans?
@@Ragey235yes, 3 reverse fans and 1 regular fan
clean build man
so let me get this straight you have 1 intake and the rest are exhaust? judging by how the fans are positioned.
@@subliminalbanana2442 the three vertical fans are reverse bladed fans that came with the case, so they are intaking. So 4 intake and 4 exhaust in this build.
@ thanks for clearing it up for me.
how to install i/o shild to this case?
Why isn't the bottom fan reverse?
Better as intake in that position.
@@losslessthoughts i mean why it is not reverse fan - like 3 fans on the side.
@@SM_Higgs The case comes with 4, 3 reverse flow and 1 normal. It appears the fans can't be bought separately as of yet, or weren't the last time I checked.
@@losslessthoughtsOh, now I understand. I saw only version without fans in my country.
Can fit a capture card under the 4080 in that port? In this build?
How's the build quality on this case? Any issues with the project zero board and connecting the cables in the back?
Build quality seems solid, no complaints so far. The project zero board fit perfectly with plenty of room for cables in the back.
7:43 Damn man, that film is not to take off.
The film was torn after peeling the white sticker off. PC sits on a desk 24/7, no real need to leave that film on.
im having trouble with the fans this case comes with. how do i link them all together without a fan hub?
They are daisy chained, One chain for the power, one chain for the RGB. At end of the chain plug into the board.
Is there no little holding support for the graphics card?
The support stand included with the GPU didn’t fit with the bottom fan attached, so I ended up making on from Legos. Not in the video though.
I have the same case and I want to buy the JONSBO-SL120, are they good fans and is there a good airflow because currently with other temporary fans (I have only 3 in total) my CPU is a little too hot.
hi the fans are included in the case ?
@@draco_6473 Yes. The case came with three reverse 120mm fans and one regular 120mm fan. I added my own for rear exhaust.
@@spddmn_videos thank you
класс,
самая вкусная распаковка видеокарты которую я видел!
The one thing that pissed me off with this case is that both the intake and the top don't have dust filters, only the bottom. Make it make sense!
Generally, the top is for exhaust. Adding a filter there only helps keep any dust inside, possibly clogging the entire vent and retaining all the heat. If the holes on the panel where the fans are intaking are are small enough [and it has good porosity], you wouldn't want a filter there either because the holes are small enough to keep out larger dust particles. Adding a filter at that point would impede airflow.
Why you pill off the anti break film ?
Film was already torn on arrival and generally looks bad. No reason to leave it on, PC just sits on my desk.
Ummm....I'm pretty sure that nice CPU watercooling block is supposed to cover the CPU completely. Oh, and I'm also pretty sure the hoses from that same nice CPU watercooling block are not supposed to block the PCI slot. Is this your first time?😂