Thanks for the video couldn’t find anything about rebuilding them, Bought 3 stators and of course all of them are bad so i really appreciate you sharing the knowledge you’ve acquired!
Great work! I'm about to do this job myself. I bought a blaster with no spark, bought and installed an ebay stator, and now it will start, idle, and not rev at all. The engine bogs like crazy, no matter how much throttle you give it. I'm going to install the Moose Racing coils and inductive pickup onto the new base plate, because it does allow for timing adjustments. The stock stator doesn't allow that unless you're willing to slot the mounting holes. It's well-documented that those cheapy eBay stators are very bad quality, and many people report the same problems.
I have spark, but it's super weak. The atv starts but only if i give it some gas and it wont itdle. Do you think it could be because of the weak spark? I have testet the coil and its ok, i have a new spark plug cap and it is in spec. The cdi is getting only from 1 to 2v. What do you think?
I might have the compression checked cause my top end got blown 2X. The other things besides spark are air and gas flow needed to keep her running.... thanks for the corner stop.!!
@@PappysCorner The engine has been rebuilt qouite recently and before i changed my reeds and painted the atv it was running fine. It is getting a bunch of gas i think its flooding the motor. but what ever i do with the jetting it doesnt change. And yes i have cleaned and rebuilt my carb.
Martain J I need to know Have you install a stater with numbers on it I have one with no numbers and I got one with numbers on it the one with no numbers do not work so I bought one and it has numbers on it what number do I set it to
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](http://i.ytimg.com/vi/VoXYzQ61tRM/mqdefault.jpg)
Thanks for the video couldn’t find anything about rebuilding them, Bought 3 stators and of course all of them are bad so i really appreciate you sharing the knowledge you’ve acquired!
No problem 👍 That's awesome... I appreciate the corner stop and drop.!! you Rock.!!
@@PappysCorner yes sir and my girlfriends blaster now has a beautiful blue spark ⚡️ thanks again!
Great work! I'm about to do this job myself. I bought a blaster with no spark, bought and installed an ebay stator, and now it will start, idle, and not rev at all. The engine bogs like crazy, no matter how much throttle you give it. I'm going to install the Moose Racing coils and inductive pickup onto the new base plate, because it does allow for timing adjustments. The stock stator doesn't allow that unless you're willing to slot the mounting holes. It's well-documented that those cheapy eBay stators are very bad quality, and many people report the same problems.
Awesome keep trying stuff man that's how we gain knowledge.!!!... Thank you for the corner stop and drop you Rock.!!
I have spark, but it's super weak. The atv starts but only if i give it some gas and it wont itdle. Do you think it could be because of the weak spark? I have testet the coil and its ok, i have a new spark plug cap and it is in spec. The cdi is getting only from 1 to 2v. What do you think?
I might have the compression checked cause my top end got blown 2X. The other things besides spark are air and gas flow needed to keep her running.... thanks for the corner stop.!!
@@PappysCorner The engine has been rebuilt qouite recently and before i changed my reeds and painted the atv it was running fine. It is getting a bunch of gas i think its flooding the motor. but what ever i do with the jetting it doesnt change. And yes i have cleaned and rebuilt my carb.
@@SimasMc If it is getting to much gas and you think your jetting is correct, then check the float height. After that, check need position.
can i leave it in and do this? my stator bolts are stripped and ceased up
Not for this one you need access both sides. Good luck with them bolts.
Thank you for the video.
Thank you for the comment.... The re-posted was last fall to meet Utube policy changes.
Martain J I need to know Have you install a stater with numbers on it I have one with no numbers and I got one with numbers on it the one with no numbers do not work so I bought one and it has numbers on it what number do I set it to
@@PappysCorner where did you get the parts
@@KatanaRIDERS. Yamaha dealership. You can probably Google it and find what you need... thanks for the corner stop..!!!
Where did you order the rebuild kit?
RMSTATOR INC - Amazon Marketplace, Good Luck
@@PappysCorner how much you paid??
Wait i also need tp rebuild mine can we buy them new life from the Yamaha company
Used to could.
@@PappysCorner wait so i can buy one anymore