Thanks for the vevor review. I personally missed a sale price on a Skil complete with rack and pinion table/fence... they were out of stock. I went back a couple weeks later and found one in the box unmarked. I grabbed a mgr and he scanned it up at $180. The LORD is GOOD! Missed the sale and saved a bunch more! It is not a bosch or dewalt bit it is super for my needs. I learn something from each review i see. Thanks again!
Mike , thanks for sharing another great video with us . I bought the Skil , red one , after watching your review on it . Best saw in the $300.00 dollar price range. Thanks again Ed
Have you considered looking at the rigid 4518? I just picked one up and I’m not sure if I got lucky or not but I’ve had great luck with it and I mainly used it for making tongue and groove boards for a custom cedar fence with zero issue. I’m curious to see if you have the same experience and your thoughts compared to other saws as I only have experience with it and one other ancient table saw
I got this saw before seeing this review. Two problems, the one you found with the fence, I have to set the alignment to the blade each time the fence is moved and the riving knife is permanently attached so you can't put in a thinner blade. as the riving knife is the thickness of the factory blade.
Great video again Mike. I am very interested in finding a reasonably priced table saw to work with as a hobby. I did notice that Menard's has a Rikon table saw on sale for $269. It is the RIKON 10" Jobsite Table Saw with Folding Stand and Model Number: 11-600S. If you could possibly review this table saw someday that would be great. I noticed that this saw could possibly be as good as the Skil table saw you reviewed but I wanted to see what you think.
A cheap table saw is a dangerous table saw. Spend the money to get something safe, or just don't buy one. The money you save on something like this will be nothing compared to the hospital bills you end up with.
Another good one, Mike. That saw is no worse than the first Craftsmen I bought about 30 years ago from Sears when I first got home from the Army. It went right back and I resolved myself to spending some real money on the workhorse of the shop. But, if you are making birdhouses for the PTO fundraiser, or have no idea what you are doing yet, this may work. It'll be interesting to see what the safety stats will be on it in the future (oh, who am I kidding?). Good weekend.
Thanks Meat! That fence is bad but I could make it work. Add the wobble and loose housing and it’s too much bad for me. Pushing the budget a little gets you some pretty good options. Thanks for watching and have a good weekend!
@@ProjectsForAllReviews Now that would have been the saw to give away. I wonder what the liability is on raffling off a tool that may not be 100%. Any way, you know that we love your stuff. Enjoy!
The wobbling blade is a feature to cut a wide knerf so that the blade does not get stuck in the material. /S 🙂 The little brother to this saw is the WEN TT0811 8-1/4 table saw with a 11 Amp motor. Same frame and fence (it also weights about 13 pounds less). There are no reviews of the Wen that I can find. Could it be that Vevor hung a 10 Inch saw in a frame designed for a 8-1/4 saw ?
Good review, Mike. The wobble is likely form the arbor run-out, and is way out of tolerance for what any table saw should have. If I was on a really tight budget, I could live with the fence. It's a PIA to have to measure at the front and back of the blade before making a cut. But to have a table saw vs. not having one at all I could tolerate it. That wobbling arbor is a whole other issue though. With the stress of that much run-out spinning at over 3000 rpm I would have serious concerns that the added wear and tear would some day cause the saw to fly apart. Gives me a creepy Final Destination vibe. Hard pass on this one.
Yep I agree. I usually keep all the tools I purchase or are sent to me for future reference and for comparisons. This one’s most likely getting cut in half and put in the alley. Thanks for watching!
Just curious, could the blade wobble be a hardware tightening issue? Maybe the mounts need tightened? Shouldn't need to do that but if that's all it is, it's not a big deal. The fence looked to be about on par with the Ryobi I had and the main reason I upgraded to the Skil (after seeing your review of it, thanks for that one by the way!)
Honestly I decided after the Hercules mess I’ll no longer try and fix serious out of the box defects. Especially potentially dangerous issues like this. That Ryobi review is on the horizon. Thanks for watching Viking!
Disturbing it is Gary! There’s been a few tools now that are so bad I would not resell them on the secondary market. I’ll probably keep this for reference and cut it in half when I’m tired is storing it. Thanks for watching!
When did you get this saw? It doesn't look like any of the ones on Vevor's website. They have a plastic-body saw with the same crappy fence system and a tube-body saw with a rack-and-pinion fence like on the dewalt.
Hello. Are you in the US? I just checked the website and I see this saw and a similar style with a stand. No rack and pinnion. I checked Amazon also and same. Thanks for watching!
Thanks for the video. You are being too kind to this saw. It's has only cons in my book. The fact that you did not want to rip the 4x4 due to safety concerns says it all.
@@ProjectsForAllReviews you know the other one I’m looking at is this one …WEN TT1015 15-Amp 2 HP 10-Inch Industrial Benchtop Jobsite Table Saw , Black, just wondering why it’s 469.00
Man I gotta start a channel just to get free tools lol...never won a free lunch in my life...never even heard of this brand...fare review of this, I mean for 200 bucks though...that fence is a deal breaker...these and all company's need to realize if they don't, that a fence is all to important, I mean even that Bosch fence is garbage IMO..,bad fence equals no sale for me...
Not unreasonable. I've probably used worse. It's like anything else...just respect it and pay attention. The one time I didn't, I ended up taking a couple of chunks out of my thumb... lesson learned.
The thought of reviewing that Ryobi has been hanging around like a bad smell. I know I have to do it eventually. We’ll prob get it out of the way soon. Thanks for watching Roy!
@@ProjectsForAllReviews The Ryobi table saw is possibly the worst built one out there. The table has one channel. That channel has ridges to hold the cheapest miter guide you've ever seen in place. wobble wobble. The ridges make it impossible to run a sled down the channel. I suppose one could grind off the ridges, but still you would have only one channel. I could name more problems of this horrific table saw, but I'll let you go over them with your review video.
We have 2 vevor successes. Wife bought a magnetic vibrating table that is fine and i bought an over the top creeper to perform maintenance on my truck due to disabilities. It was worth the money the first time used.However i would think carefully b4 buying a high tech device from vevor unless bought from Amazon with prime.
I’ve owned 2 red Skil table saws now and there is zero comparison. The Skil is a well designed and good quality saw for about $75 more than this. Thanks for watching!
Mike just tell it like it is, don't buy this saw a new wood worker buys this saw gets hurt and ruins the whole experience not worth it. Pack up the saw and send it back.
@ionutmystic Try this one! Can You Get Pro Table Saw Features On A Budget? || Skil TS6307-00 || Review | Calibration | Demo th-cam.com/video/0utyLO3Ym4o/w-d-xo.html
Wtf, vevor sells a $56 table saw. I started listening to this abd your gounf on and on about how ultra budst it is. If this us ultra budget wtf is one that cists 1/4 of this???
I only have this one product as an example but it definitely isn't confidence inspiring. They offered a couple more product of my choice to check out and I haven't taken them up on it yet. Not much in the way of power tools. Thanks for watching!
I Usualy Stay Away From Off Brand Powertools. Cause I Think About How Eazy It Is To Get Parts. That's Why I Chose Ryobi Cause I Know Where I Can Get Batterys & Parts & Accessories For Them.
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
thanks for the video mike! you have answered my question about the cheap table saw fence adjustments. keep em coming buddy!
Glad to help Matt! Thanks for watching!
Thanks for the vevor review. I personally missed a sale price on a Skil complete with rack and pinion table/fence... they were out of stock. I went back a couple weeks later and found one in the box unmarked. I grabbed a mgr and he scanned it up at $180. The LORD is GOOD! Missed the sale and saved a bunch more! It is not a bosch or dewalt bit it is super for my needs. I learn something from each review i see. Thanks again!
Thanks for the review. You are not unreasonable. I bought the Skilsaw SPT99-11 a few months ago after watching your review. Love it.
No comparison between this saw and yours Porkchop. For $75 bucks more you’d be crazy not to get the Skil! Thanks for watching!
Mike , thanks for sharing another great video with us . I bought the Skil , red one , after watching your review on it . Best saw in the $300.00 dollar price range. Thanks again Ed
Glad to hear it worked out well Ed!
Between the fence and the blade wobble, this isn't just a bad saw, it's a very dangerous saw.
You’ll get no argument from me.
Great Job Mike!! Kept me glued to the Tube! --Joe P
Lol! Thanks Joe! Good to see ya again
Great video Mike
Thanks for watching Michael!
Thank you! You saved me some $$$
Another good review. I agree with you 2 very crucial point that is fell short. BUT is it a manufacture defect of that particular saw.
Have you considered looking at the rigid 4518? I just picked one up and I’m not sure if I got lucky or not but I’ve had great luck with it and I mainly used it for making tongue and groove boards for a custom cedar fence with zero issue. I’m curious to see if you have the same experience and your thoughts compared to other saws as I only have experience with it and one other ancient table saw
12K subs!
Grats, Mike!
Thank you!
I got this saw before seeing this review. Two problems, the one you found with the fence, I have to set the alignment to the blade each time the fence is moved and the riving knife is permanently attached so you can't put in a thinner blade. as the riving knife is the thickness of the factory blade.
Great video again Mike. I am very interested in finding a reasonably priced table saw to work with as a hobby. I did notice that Menard's has a Rikon table saw on sale for $269. It is the RIKON 10" Jobsite Table Saw with Folding Stand and Model Number: 11-600S. If you could possibly review this table saw someday that would be great. I noticed that this saw could possibly be as good as the Skil table saw you reviewed but I wanted to see what you think.
A cheap table saw is a dangerous table saw. Spend the money to get something safe, or just don't buy one. The money you save on something like this will be nothing compared to the hospital bills you end up with.
dont be a dumb ass and you should probably be alright@@MAGAMAN
I’ll have a look at the Rikon Paul. I’d love to find a couple decent alternatives to the Skil for similar cash. Thanks for watching!
Another good one, Mike. That saw is no worse than the first Craftsmen I bought about 30 years ago from Sears when I first got home from the Army. It went right back and I resolved myself to spending some real money on the workhorse of the shop. But, if you are making birdhouses for the PTO fundraiser, or have no idea what you are doing yet, this may work. It'll be interesting to see what the safety stats will be on it in the future (oh, who am I kidding?). Good weekend.
Thanks Meat! That fence is bad but I could make it work. Add the wobble and loose housing and it’s too much bad for me. Pushing the budget a little gets you some pretty good options. Thanks for watching and have a good weekend!
@@ProjectsForAllReviews Now that would have been the saw to give away. I wonder what the liability is on raffling off a tool that may not be 100%. Any way, you know that we love your stuff. Enjoy!
That's why I went Dewalt for rack and pinion
Have you reviewed the Metabo 10 inch portable table saw? its on sale now---need to know!--thanks
The wobbling blade is a feature to cut a wide knerf so that the blade does not get stuck in the material. /S 🙂
The little brother to this saw is the WEN TT0811 8-1/4 table saw with a 11 Amp motor. Same frame and fence (it also weights about 13 pounds less).
There are no reviews of the Wen that I can find. Could it be that Vevor hung a 10 Inch saw in a frame designed for a 8-1/4 saw ?
Good review, Mike.
The wobble is likely form the arbor run-out, and is way out of tolerance for what any table saw should have. If I was on a really tight budget, I could live with the fence. It's a PIA to have to measure at the front and back of the blade before making a cut. But to have a table saw vs. not having one at all I could tolerate it.
That wobbling arbor is a whole other issue though. With the stress of that much run-out spinning at over 3000 rpm I would have serious concerns that the added wear and tear would some day cause the saw to fly apart. Gives me a creepy Final Destination vibe. Hard pass on this one.
Yep I agree. I usually keep all the tools I purchase or are sent to me for future reference and for comparisons. This one’s most likely getting cut in half and put in the alley. Thanks for watching!
Just curious, could the blade wobble be a hardware tightening issue? Maybe the mounts need tightened? Shouldn't need to do that but if that's all it is, it's not a big deal. The fence looked to be about on par with the Ryobi I had and the main reason I upgraded to the Skil (after seeing your review of it, thanks for that one by the way!)
No, it's a cheap plastic chinese garbage issue.
Honestly I decided after the Hercules mess I’ll no longer try and fix serious out of the box defects. Especially potentially dangerous issues like this. That Ryobi review is on the horizon. Thanks for watching Viking!
I would have to bet that you are an expert at "some assembly required". Haha!
You're not lyin Joesph! Practice make perfect for sure. Thanks for watching!
Thanks for this budget video. That wobble is a bit disturbing to see along with a fence that is not straight.
Disturbing it is Gary! There’s been a few tools now that are so bad I would not resell them on the secondary market. I’ll probably keep this for reference and cut it in half when I’m tired is storing it. Thanks for watching!
When did you get this saw? It doesn't look like any of the ones on Vevor's website. They have a plastic-body saw with the same crappy fence system and a tube-body saw with a rack-and-pinion fence like on the dewalt.
Hello. Are you in the US? I just checked the website and I see this saw and a similar style with a stand. No rack and pinnion. I checked Amazon also and same. Thanks for watching!
To me for just a little more money I'll still stick with my Skill just like the one you gave away
Yep I would do the same!
Thanks for the video. You are being too kind to this saw. It's has only cons in my book. The fact that you did not want to rip the 4x4 due to safety concerns says it all.
Yep. There’s no hiding it Abel. Should be back to the drawing board with this one. Thanks for watching!
That blade wobble in dangerous AF!
Yep. As soon as a saw that I knew the review was over.
Delta 36-6023 10 Inch Table Saw with 32.5 Inch Rip Capacity….. Can you make a review on this one it’s 465.00 and have been scratching my head over it.
This Deltas been on my radar for a while. We will get to it soon. Thanks for watching!
@@ProjectsForAllReviews you know the other one I’m looking at is this one …WEN TT1015 15-Amp 2 HP 10-Inch Industrial Benchtop Jobsite Table Saw , Black, just wondering why it’s 469.00
Glad I came across your Video 👌🏻. I'll won't buy this one . Thank You
maybe you can repurpose it into a whirlygig
Man I gotta start a channel just to get free tools lol...never won a free lunch in my life...never even heard of this brand...fare review of this, I mean for 200 bucks though...that fence is a deal breaker...these and all company's need to realize if they don't, that a fence is all to important, I mean even that Bosch fence is garbage IMO..,bad fence equals no sale for me...
Not unreasonable. I've probably used worse. It's like anything else...just respect it and pay attention. The one time I didn't, I ended up taking a couple of chunks out of my thumb... lesson learned.
If you ask me I say Don't leave it to Vevor. LOL
well, it's better than the Ryobi... but that's not saying much.
The thought of reviewing that Ryobi has been hanging around like a bad smell. I know I have to do it eventually. We’ll prob get it out of the way soon. Thanks for watching Roy!
@@ProjectsForAllReviews The Ryobi table saw is possibly the worst built one out there. The table has one channel. That channel has ridges to hold the cheapest miter guide you've ever seen in place. wobble wobble. The ridges make it impossible to run a sled down the channel. I suppose one could grind off the ridges, but still you would have only one channel. I could name more problems of this horrific table saw, but I'll let you go over them with your review video.
Yeah...that fence is total garbage. I'm also not thrilled about using power tools with no electrical ground.
Yep that was on my list to mention but when the blade wobbled I forgot about it. Good call Jeff!
A total disasta...!
Vevor Apply directly to trash can.
Lol! Thanks for watching MAGAMAN!
We have 2 vevor successes. Wife bought a magnetic vibrating table that is fine and i bought an over the top creeper to perform maintenance on my truck due to disabilities. It was worth the money the first time used.However i would think carefully b4 buying a high tech device from vevor unless bought from Amazon with prime.
Looks like it’s from the skil tablesaw
I’ve owned 2 red Skil table saws now and there is zero comparison. The Skil is a well designed and good quality saw for about $75 more than this. Thanks for watching!
Mike just tell it like it is, don't buy this saw a new wood worker buys this saw gets hurt and ruins the whole experience not worth it. Pack up the saw and send it back.
You said it! For a few bucks more you can get decent, reliable safer saw!
@@ProjectsForAllReviewswhat is a good cheap saw you can recommend?
@ionutmystic Try this one! Can You Get Pro Table Saw Features On A Budget? || Skil TS6307-00 || Review | Calibration | Demo
th-cam.com/video/0utyLO3Ym4o/w-d-xo.html
@@ProjectsForAllReviews is not available in Europe :(
Wtf, vevor sells a $56 table saw. I started listening to this abd your gounf on and on about how ultra budst it is. If this us ultra budget wtf is one that cists 1/4 of this???
I didn't see a saw that price? Just this one and one with a stand for more money. Thanks for watching!
You can only cut so many corners until you're just being dumb. It takes Skil to recognize the value in a purchase! :)
This was a couple corners too many! Thanks for watching Bobby!
DO NOT BUY anything from Vevor the products are a waste of money..I had the worst experience with their products and the company.
I only have this one product as an example but it definitely isn't confidence inspiring. They offered a couple more product of my choice to check out and I haven't taken them up on it yet. Not much in the way of power tools. Thanks for watching!
I Usualy Stay Away From Off Brand
Powertools. Cause I Think About
How Eazy It Is To Get Parts. That's Why I Chose Ryobi
Cause I Know Where I Can
Get Batterys & Parts & Accessories For Them.
Smart advise! Thanks for watching Roger!
6