Thank you for this video. I didn't realize that the white tube was a sheath and didn't understand why it wasn't going down. Didn't realize it was hollow.
Greetings! Regarding that printer, does it have the ability to print any size, both something very small and something a little large? Or does it only print specific sizes?
@@CJScratch it's way more than fun :) printing really well actually. I stil search how and for what, to use that usb type-c port. i can't see any program to recognize it for direct printing.
Greetings! This printer, compared to the Kobra Plus, which one could you recommend based on your criteria or experience? Of course, if you've tried both. It would be the first time that the person would use it and I would like to make a good choice since between the two I do not know from what sizes of pieces they can be created, among other things.
Thanks for the video. I just got this printer and this was super helpful. Question, does the boat print come pre loaded on the SD card that comes with the machine?
Salve dopo aver montato la stampante seguendo il tuo prezioso video seleziono Auto-level ma compare Error Printer Halted - please reset. Cosa suggerisci di fare?
What software do you use for slicing for this model? I’m wanting to buy this since it’s on sale on Amazon but I want to make sure there is a good app for slicing
Hi, great video! Does the anycubics software wipe the nozzle? I'm using Cura right now cause that's what im used to and it's working perfectly except the nozzle wipe, I suppose there's gcode for that or is there any way to have that before prints? Thank you@@CJScratch
@@brekekee Just use a skirt to adjust the Z offset. The skirt also acts like a nozzle wipe as you call it. The purpose of the Nozzle wipe is just to get the filament flowing so it doesn't blob when starting a print.
I'm disabled and want to get into 3D printing, one of my main struggles is being able to find tune turning things to level beds. Does this do it automatically so I don't have to manually level? It isn't entirely possible given my conditions
Hey!! I just got one for Christmas and I am having some issues with the printer. When it moves up and down it makes a really loud rubbing noise that I can’t seem to fix! Do you have any recommendations to fix it??
Hi! I received the kobra 2 neo, I tried the automatic calibration but the nozzle is not centered, the calibration takes points outside the print bed. What can I do? it's normal? Looking at your video it seems like there is the same "problem"
Good overview, I'm yet to see much content out there for the kobra 2 Neo. I'm brand new to 3d printing I got mine a few days ago and have been having fun experimenting. So far had alot of luck on simple prints but really need to dial in some settings to get more complex things to come out. Currently getting alot of stringing but I'm working on that. I'm liking Orca slicer after trying pretty much all of the main ones
Hi, I bought the same printer. Could you tell me where did you connect one cable with "E" label? It is next to "X" one for stepper, but the instruction doesnt say a word about that one :) Also how tight should the belts be? Thank you in advance
Thanks for the video. It was very helpful. I have a problem though. The printer fails the auto leveling and fails calibration. It gives the error message that homing x failed. It only will start auto leveling if the module is all the way to the left, my left when I'm standing in front of the machine facing it. But it doesn't move from that position. It will go up and down but then fails the calibration as soon as it touches the plate. Any thoughts?
@@CJScratch Thanks for the reply. In settings there is an option to reset to defaults which I did but it didn't seem to have any effect. I'm currently waiting for customer service to get back to me.
Late reply, but the extruder is direct drive. It has a bowden tube because the spool is on the side of the printer. And also, bowden tube printers will print tpu when set up well, especially the ones that aren't super soft. My ender 3 v2 neo prints 92a tpu just fine, both big and small prints even with retraction and pressure advance enabled, still has a bowden setup but the extruder is replaced with a bmg clone.
While assembling mine, I have an extra plug with letter 'E' that seems to have nowhere to plug into. Am I missing something? I did notice that there is a wire hanging down in this video. Is it the same?
Hi! I received the kobra 2 neo, I tried the automatic calibration but the nozzle is not centered, the calibration takes points outside the print bed. What can I do? it's normal? Looking at the video it seems like there is the same "problem". Do you have the same problem?
How is it doing now? I hope you are aware that Anycubic has precision tuned this printer for the benchy. Try something a bit larger. You will more than likely need to do a lot of dialing in. Anycubic is notorious for the lack of quality in their printers. After about 2 months, you will probably notice a deterioration of your print quality and maybe some failing parts. I have owned 2 anycubic printers. My first one was the Mega Zero, bowden tube printer. My second was the Kobra, a direct drive extruder. Both worked great out of the box. But both also started failing within 2 months. Mostly parts failing. It took over 4 months to finally get the last extruder from them. I got discouraged and turned everything off and never looked back. I wanted to print things, not dink around with fixing things. It was extremely frustrating.
i have the i3 mega as well it worked great my only issue with it was bed leveling i hated it cause it was a constant issue .. this printer has been solid so far no issues as long as its free from dust build up and for 160.00$ its solid ..
ive had a kobra max for little over 4 months and the only issues ive had was with a fan but anycubic sent me a new one within a week but no issues after
Thanks for this video … definitely helped me with the setup … I cannot get my filament to feed through the extruder … I am cutting at an angle and pushing the button on top of the extruder to load but it will not feed through … anyone reading this have any tips .. I’m not sure how to troubleshoot from there 😞
yeah im not sure why ift did that in the final upload .. i think it has something to do with the way it uploaded on youtube because my final edited version did not have the pink flashes .. unfortunately i already deleted the original footage so this is what we are left with ..
![[TH] 2024 PMSL SEA W1D1 | Summer | เริ่มโดดแรก ระเบิดความมันส์](http://i.ytimg.com/vi/fnPAjQmWzWE/mqdefault.jpg)
Thank you for this video. I didn't realize that the white tube was a sheath and didn't understand why it wasn't going down. Didn't realize it was hollow.
me too
Greetings!
Regarding that printer, does it have the ability to print any size, both something very small and something a little large? Or does it only print specific sizes?
Thank you! I was getting worried!
Thanks for this, helps a lot.
Amazing video, helped me a lot. thank you
you are very welcome
I ordered mine today, going to pick it up tomorrow.
its a fun little printer to have
@@CJScratch it's way more than fun :) printing really well actually. I stil search how and for what, to use that usb type-c port. i can't see any program to recognize it for direct printing.
Greetings!
This printer, compared to the Kobra Plus, which one could you recommend based on your criteria or experience?
Of course, if you've tried both. It would be the first time that the person would use it and I would like to make a good choice since between the two I do not know from what sizes of pieces they can be created, among other things.
kobra plus
has a bigger build plate and ability to make bigger prints
both printers are great
Thanks for the video. I just got this printer and this was super helpful.
Question, does the boat print come pre loaded on the SD card that comes with the machine?
Yes it does
@@BigDogMemes Thanks!
correct it does
Salve dopo aver montato la stampante seguendo il tuo prezioso video seleziono Auto-level ma compare Error Printer Halted - please reset. Cosa suggerisci di fare?
Good video. Would you still recommend this printer? Does it print fast? I'm thinking of asking for one for xmas but is it worth it?
yes for the price its a great printer i use it daily
What software do you use for slicing for this model? I’m wanting to buy this since it’s on sale on Amazon but I want to make sure there is a good app for slicing
im using aAnycubics own branded slicer as of now .. it works fine …waitng on cura to update to add this model..
i ordered mine direct from anycubic.com
Hi, great video! Does the anycubics software wipe the nozzle? I'm using Cura right now cause that's what im used to and it's working perfectly except the nozzle wipe, I suppose there's gcode for that or is there any way to have that before prints? Thank you@@CJScratch
@@brekekee Just use a skirt to adjust the Z offset. The skirt also acts like a nozzle wipe as you call it. The purpose of the Nozzle wipe is just to get the filament flowing so it doesn't blob when starting a print.
hi, thanks for the video. How loud is this printer? I heard his fan being noisy
I have the printer, and it isn’t too loud
Thank you thank you thank you, we got it done first try, no problems
glad the video helped
3idea Kobra 2 Neo 3D Printer filament size?
Hi, do you know how to level de z offset?
I'm disabled and want to get into 3D printing, one of my main struggles is being able to find tune turning things to level beds. Does this do it automatically so I don't have to manually level? It isn't entirely possible given my conditions
yes it has auto leveling just need to turn knob to setting on screen select auto level and it does it all for you
Nice video! How many Z screws have this printer? I only could see one in your video
for this model one,,
My z height is showing -2mm as well. Have you found any way to reset/zero that z level?
you can do recalibration through settings
Hi, do you by chance have the slicer settings for this printer in cura? Maybe you can make a quick video on setting it up in the slicer!
i haven't tried cura cause at the time i purchased this curry did not have this model as an option … i will have to check
No worries, I am just using anycubic slicers since it already had a decent profile made for it! @@CJScratch
Hey!!
I just got one for Christmas and I am having some issues with the printer. When it moves up and down it makes a really loud rubbing noise that I can’t seem to fix! Do you have any recommendations to fix it??
rubbing noise kinda vague .. im not sure what you mean .. i would have to see whats happening
The rubbing noise is a loud noise sounding like it’s stuck or having trouble moving up and down. I have tried losing the wheels and that did nothing.
Hi! I received the kobra 2 neo, I tried the automatic calibration but the nozzle is not centered, the calibration takes points outside the print bed. What can I do? it's normal? Looking at your video it seems like there is the same "problem"
you can go into settings do a factory reset and try auto leveling again
have you tried the usb-c plug? i haven't been able to get anything to show up
no i just use the sd card
I have a question can you please help does it work if I use it with cura or what did you use To slice it?
as of now i couldn't get it to work with cura . im using anycubics own branded slicer
@@CJScratch All right thanks
thank you
no problem
Good overview, I'm yet to see much content out there for the kobra 2 Neo. I'm brand new to 3d printing I got mine a few days ago and have been having fun experimenting.
So far had alot of luck on simple prints but really need to dial in some settings to get more complex things to come out. Currently getting alot of stringing but I'm working on that. I'm liking Orca slicer after trying pretty much all of the main ones
Super easy to use perfect for beginners
My stringing issue was purely filament related. My Neo prints perfectly now
@@Betruet a solid printer for a great price
@@Betruet which filament was giving you trouble and which is working better?
Does the neo had the input shaper?
yes it does have this feature
Hi, I bought the same printer. Could you tell me where did you connect one cable with "E" label? It is next to "X" one for stepper, but the instruction doesnt say a word about that one :) Also how tight should the belts be? Thank you in advance
I just set mine up, and you don't connect it to anything. I can't tell you what it's for, but mine printed great so 🤷🏼♂️
@@vashaddams816 ok thanks
not required for this model
Quick question how do you remove the filament tube if you accidentally push it too far in?
I’m also wondering that too
Me three
It's so hard to line the next reel up cos it's so close to the black box xxx
Thanks for the video. It was very helpful. I have a problem though. The printer fails the auto leveling and fails calibration. It gives the error message that homing x failed. It only will start auto leveling if the module is all the way to the left, my left when I'm standing in front of the machine facing it. But it doesn't move from that position. It will go up and down but then fails the calibration as soon as it touches the plate. Any thoughts?
go into settings do a factory reset
@@CJScratch Thanks for the reply. In settings there is an option to reset to defaults which I did but it didn't seem to have any effect. I'm currently waiting for customer service to get back to me.
lol. I just found info about how to do a factory reset with updating firmware using the sd card so I'm going to try that.
Am I able to use different filaments collors at once or can I only use one on it
you can only use one at a time .. you could pause the print add new color but that would be a little inconvenient .
@@CJScratch thanks for letting me know
How does this print TPU with that tube? Does it not cause issues?
Late reply, but the extruder is direct drive. It has a bowden tube because the spool is on the side of the printer. And also, bowden tube printers will print tpu when set up well, especially the ones that aren't super soft. My ender 3 v2 neo prints 92a tpu just fine, both big and small prints even with retraction and pressure advance enabled, still has a bowden setup but the extruder is replaced with a bmg clone.
Where does the e cable go?
E cable is not needed for this model
Can this print other material ? like ASA ABS TPU?
PLA/ABS/PETG/TPU
nice
Just out of curiosity… am I the only one looking at pink flashes initially?
No 😂
yeah unfortunately when the video was decoded it had some glitches which resulted in the flashes you see …oh wel...l hope it still helped
@@CJScratch don’t worry bud… I just wanted to be sure, nothing wrong at my end… ❤️
I saw em starting around 4:30
Migraine inducing!
While assembling mine, I have an extra plug with letter 'E' that seems to have nowhere to plug into. Am I missing something? I did notice that there is a wire hanging down in this video. Is it the same?
that wire is not needed for this specific model
Thanks for your reply.
it’s for a filament captor
@@fedhimimouna4321 What is that? I'm brand new to filament and new to resin.
Hi! I received the kobra 2 neo, I tried the automatic calibration but the nozzle is not centered, the calibration takes points outside the print bed. What can I do? it's normal? Looking at the video it seems like there is the same "problem". Do you have the same problem?
I have vyper never have problem 2 years now
How is it doing now? I hope you are aware that Anycubic has precision tuned this printer for the benchy. Try something a bit larger. You will more than likely need to do a lot of dialing in. Anycubic is notorious for the lack of quality in their printers. After about 2 months, you will probably notice a deterioration of your print quality and maybe some failing parts. I have owned 2 anycubic printers. My first one was the Mega Zero, bowden tube printer. My second was the Kobra, a direct drive extruder. Both worked great out of the box. But both also started failing within 2 months. Mostly parts failing.
It took over 4 months to finally get the last extruder from them. I got discouraged and turned everything off and never looked back. I wanted to print things, not dink around with fixing things. It was extremely frustrating.
so what have you used thats better?
i have the i3 mega as well it worked great my only issue with it was bed leveling i hated it cause it was a constant issue .. this printer has been solid so far no issues as long as its free from dust build up and for 160.00$ its solid ..
ive had a kobra max for little over 4 months and the only issues ive had was with a fan but anycubic sent me a new one within a week but no issues after
I've got a few printers from them and they all produce great quality prints.
Thanks for this video … definitely helped me with the setup … I cannot get my filament to feed through the extruder … I am cutting at an angle and pushing the button on top of the extruder to load but it will not feed through … anyone reading this have any tips .. I’m not sure how to troubleshoot from there 😞
you can contact me on facebook messenger
Bro how did you fix it
Any idea how to wire it to computer I have the cord in a port but I can't locate the device on my computer
Use a USB to USB type c to connect
Does it support resin printing?
unfortunately no
Can anyone tell me if i can print using a chromebook? Thanks guys. Im a complete newb and will be using this printer in a few days.
What about the profile for Slicers?
you can use anycubics slicer or the pursa slicer .. cura says its compatible but as of now i haven't found the model of this printer ..
Do you have any slicer settings for this printer? The one the give doesnt work that well...@@CJScratch
Do you know what is the plug E? Cuz i dont find where to plug it😅
do not need it or this model
That got me too, nice to know I'm not the only one.
Where does E terminal go?
Hey if you figure it out lemme know :)
is it easy to setup
so easy
3idea Kobra 2 Neo 3D Printer filament size???
1.75mm
@@CJScratch thanku brother 😍
can somebody provide usefull cura profile for pla? that what is on anycubic site is ultra slow
Yeah im not sure why cura isn't working with this model yet
It is showing homing failed z while I am auto leveling can you please help me
i would recommend doing a full reset through the settings option
Honestly great video, but honestly bad because of the pink flash
yeah im not sure why ift did that in the final upload .. i think it has something to do with the way it uploaded on youtube because my final edited version did not have the pink flashes .. unfortunately i already deleted the original footage so this is what we are left with ..
im having calibraition issues after this setup
try calibration a couple times also go through check your bane tightness and screws make sure they are snug
Weird how the fan kept turning on and off when the z raised lol
not sure why it does it but thats the default
@@CJScratch Seems like all the new machines that went out did that. I think I'm going to order one for Black friday sale. 139 shipped is a steal!