Hey there! I hope the video was useful and thanks for watching! If you're into home automation with Shelly devices, you've come to the right place. I'm planning to create more content, so if you want to stay up-to-date with all the latest videos, be sure to hit that subscribe button! It will really help the channel grow! Much appreciated and thanks for your time!
I love it when somebody takes the time to do a demo that is clear concise and we can fully understand from start to finish. Sounds simple yeh, but in reality i spend half my day scrolling through the BS to get the one that actually gets the job done. **************Thank you Sir this is the one we've all been waiting for.****************
Thanks! I'm glad you found it useful!!! I spent a lot of time looking at videos and searching online until I installed my first Shelly on a roller shutter.
Thanks for the video very clear. 2 question please. I have a blue neutral wire but not split as yours with connector, what should i do? Also would you advise how to connect also the lights? Inthe same socket of the roller shut swiths i have also the switch for the light
This description and the video seems to have an error. It says to add the black wire (Active) to only one of the L terminals on the Shelly. Later in the video it then connects the L terminal of the switch to the other L terminal on the Shelly. This is how I connected mine but the Shelly would only operate in Relay mode. To make it operate in Roller Shutter mode I had to connect an active supply to BOTH of the L terminals of the Shelly and an active wire to the L terminal of the switch and then it all worked fine. The wiring diagrams of the Shelly device show an Active wire going to both of the L terminals of the Shelly device and also to the L terminal of the switch.
Já tentei mas não consigo por meu a trabalhar, eu tenho 2 estores com duas caixas d botões de parede. Cada um e individual mas já fios que passam “em linha” para cada comutador. Consegues ajudar me? Obrigado
Muito bom! passado alguns anos ainda funcionam? vi alguns videos onde relatavam que passado 2 anos começavam a fazer um barulho e acabavam por morrer... existe alguma melhor alternativa?
Excelente video. Não sou nada de mexer em instalações deste tipo mas graças ao teu video consegui instalar shelly 2.5 em dois estores electricos. Obrigado
Obrigado pelo video! Poderia confirmar se é possivel instalar sem usar um neutro? O controle da minha janela tem apenas o line e os dois cabos para subir/descer. Muito obrigado.
Congratulations on a helpful review. How can I get feedback on the condition of the blinds, whether it is open or closed. I think on this principle to drive a pair of garage doors. The garage door automation has a magnetic sensor that sends a status signal, but how do I connect it to the relay?
Thanks for yout feedback! For shelly 2.5, you have a setting called positioning controls. See here imgur.com/a/akT5mE4 For garage door positioning controls, I'm not sure you can do it with a shelly 2.5. I think for garage door automations you need to use a Shelly 1, which has something called dry contact. But best thing is to post your question on the Shelly support group: facebook.com/groups/ShellyIoTCommunitySupport/ There is always someone that will reply quickly. :)
Obrigado! Vai depender do tamanho da caixa. No meu caso ficam mesmo à medida. Fica tudo muito juntinho e por isso é que tento meter o shelly o mais perto possível do interruptor.
If you get a "Device failed to connect or include" error message when you want to add a new device jus try it from another phone. The app is very buggy but from another phone was successful.
Hi friends, can I use din version ? (I build my new house and I have all wire from switches and electric blinds to switchboard..) I found shelly 2 pro or shelly 4 but is alternative to shelly 2.5 ?? Thanks !!
Parabéns pelo excelente tutorial. Tenho 5 estores, em todos eles tenho 6 fios. Julgo que isto se deva ao facto de ter um interruptor central que comanda todos os estores em simultâneo. Existe algum tipo de tutorial sobre esta minha situação?
Obrigado pelo feedback! Aquando das minhas pesquisas para instalar um shelly 2.5 nunca me deparei com um vídeo desses :( Penso que o melhor será meter um post com fotos no Shelly support group: facebook.com/groups/ShellyIoTCommunitySupport/ Normalmente o pessoal costuma responder rápidamente.
Great video, but there is one issue. The switch on the video has 2 x STOP and 1 x UP and 1 x DOWN. The Shelly only has 2 x Switch outputs. The problem I have now after installing the Shelly 2.5 is that Shutter doesn't stop when I push the STOP button. Without the Shelly I can stop the roller shutter by pushing STOP, with the Shelly the STOP doesnt work. I saw you have switch Efapel 21291, I have 21290.. I that why?
HI Paulo! Thanks for your comment! I think the only difference between the 2 EFAPEL buttons is that in mine (when doing it without Shelly) I have to manually stop before activating the opposite action. I think in terms of connections to the Shelly they are probably the same. I'm thinking if it might be a configuration on the shelly side. How do you have your Device Type, Input Buttons Mode and Button Type? Mine are set to Roller Shutter, Open & Close Buttons and Momentary.
Hmm, not sure. With Shelly 2.5 you need the N wire. There are other shellys that do not require N like the Dimmer. Maybe ask here - facebook.com/groups/ShellyIoTCommunitySupport/about/ super helpful community!
You will need to thread another line for the N. There are smart devices now that don't require N with some electrical "magic" but I think they work for lights. Not sure if it will work with motors...
Tenho um shelly a funcionar, mas agora com os botões físicos não consigo parar a persiana a meio (apenas abre/fecha tudo). É suposto? Com a aplicação consigo controlar tudo direitinho
Que tipo de butões são? São parecidos com os do vídeo? É suposto parar qdo os butões ficam "off". Pode ser alguma das definções do shelly na aplicação. Por exemplo, tablez a opção button type. Ou mesmo o modo de funcionamento (relay ou roller shutter). Aqui vai um screenshot com as definições que tenho no meu imgur.com/a/akT5mE4 Espero que ajude!
Muito Bom !!! Tenho 2 Shelly para montar apesar de o interruptor ser diferente (botão unico para subir e descer) espero que ajude. Obrigado pela partilha
Obrigadi! Nas ligações é capaz de ser parecido. Na aplicação é que poderá ter uma configuração diferente. Na minha está assim: imgur.com/6CJKsDm Qualquer dúvida aivsa!
Your explanation is very crisp and video is very clear. Is the setup (color coding of wires) for Germany? Can you also do similar videos for Shelly 1/1PM.
Exelente tutorial. Mais claro que isto, não há, realmente. Fazem falta mais videos destes. No entanto reparei que aos 2:04 é mencionado, na narrativa, que no O1 liga o cabo castanho, e no 02 liga o cabo preto, mas na imagem vemos o inverso a ser executado. Mas mais adiante, aquando da ligação dos cabos mais pequenos, tudo bate certo com o video, portanto assumo que tenha sido erro de narrativa. Certo? :) Abraço e MUITO obrigado mais uma vez.
Hey there! I hope the video was useful and thanks for watching! If you're into home automation with Shelly devices, you've come to the right place. I'm planning to create more content, so if you want to stay up-to-date with all the latest videos, be sure to hit that subscribe button! It will really help the channel grow! Much appreciated and thanks for your time!
I love it when somebody takes the time to do a demo that is clear concise and we can fully understand from start to finish.
Sounds simple yeh, but in reality i spend half my day scrolling through the BS to get the one that actually gets the job done. **************Thank you Sir this is the one we've all been waiting for.****************
Thanks! I'm glad you found it useful!!! I spent a lot of time looking at videos and searching online until I installed my first Shelly on a roller shutter.
This is exactly what I needed - Very helpful - I have now automated several of my shutters!
I'm glad the video was useful! Thanks for watching!
Is the roller shutter based on dc or ac. I am looking for DC bidirectional smart switch. Thanks a lot.
Wel done! You are good in teaching. All is understandable! Bravo!
Thank you! 😃
Best tutorial for that so far! Thanks!
Hey! Thanks for the feedback! I'm glad you liked it!
Dessa maneira ficam a funcionar os interruptores de parede na mesma correto?
Olá! Sim! É a parte mais fixe dos Shelly :)
hello, great video, may i ask you if can use the same Shelly also for a sectional garage door? or you suggest to use the shelly plus 1? thanks
This is super useful. One question: if I just have a remote control: what should I do? Can I connect it directly to the shutter?
Excelente tutorial. Prático e explicativo. Permitiu-me a instalação de um shelly 2.5 com sucesso. Obrigado. Continua o bom trabalho.
Muito obrigado! Ainda bem que foi útil :)
Our shutters have a turning dial, left for down and right for up.
will this also work?
Thanks for the video very clear. 2 question please. I have a blue neutral wire but not split as yours with connector, what should i do? Also would you advise how to connect also the lights? Inthe same socket of the roller shut swiths i have also the switch for the light
This description and the video seems to have an error. It says to add the black wire (Active) to only one of the L terminals on the Shelly. Later in the video it then connects the L terminal of the switch to the other L terminal on the Shelly. This is how I connected mine but the Shelly would only operate in Relay mode. To make it operate in Roller Shutter mode I had to connect an active supply to BOTH of the L terminals of the Shelly and an active wire to the L terminal of the switch and then it all worked fine. The wiring diagrams of the Shelly device show an Active wire going to both of the L terminals of the Shelly device and also to the L terminal of the switch.
Thanks for the feedback!
Can the Shelly 2.5 handle pulse switches? I am upgrading my existing sunscreen controller to a pulse type with smart connectivity.
Já tentei mas não consigo por meu a trabalhar, eu tenho 2 estores com duas caixas d botões de parede. Cada um e individual mas já fios que passam “em linha” para cada comutador. Consegues ajudar me? Obrigado
I have a Shelly 2PM Plus and I've got 4 wires coming in from my roller shutters.
Would you please advise what are my options for wiering it?
Thanks
I would imagine it's 2 load wires (up and down) and then line and neutral. Do you still need help with this?
Muito bom!
passado alguns anos ainda funcionam? vi alguns videos onde relatavam que passado 2 anos começavam a fazer um barulho e acabavam por morrer...
existe alguma melhor alternativa?
Does this one allow going to 10% for example? Or just open/close?
Excelente video. Não sou nada de mexer em instalações deste tipo mas graças ao teu video consegui instalar shelly 2.5 em dois estores electricos. Obrigado
Muito fixe! Eu também não percebia nada do assunto, mas a pouco e pouco fui experimentando! Obrigado pelo feedback!
Obrigado pelo video!
Poderia confirmar se é possivel instalar sem usar um neutro?
O controle da minha janela tem apenas o line e os dois cabos para subir/descer.
Muito obrigado.
Olá! Obrigado pelo comentário! Penso que não. O shelly 2.5 para funcionar acho que precisa sempre do neutro.
Great video and love the way you explain things, My question is did you connect it to Apple Homekit?
thanx
You can do it with homebridge.io/
Hi, for that roller switch what type off button do you set shelly for? Momentary or toggle switch?
I set it to "
Momentary - Press Button 1 for OPEN and Button 2 for CLOSE"
Excelente tutorial! Acabei de instalar 3 shelly's 2.5 com sucesso.
Obrigado.
Obrigado! Nice!
Congratulations on a helpful review. How can I get feedback on the condition of the blinds, whether it is open or closed. I think on this principle to drive a pair of garage doors. The garage door automation has a magnetic sensor that sends a status signal, but how do I connect it to the relay?
Thanks for yout feedback! For shelly 2.5, you have a setting called positioning controls. See here imgur.com/a/akT5mE4
For garage door positioning controls, I'm not sure you can do it with a shelly 2.5. I think for garage door automations you need to use a Shelly 1, which has something called dry contact. But best thing is to post your question on the Shelly support group: facebook.com/groups/ShellyIoTCommunitySupport/
There is always someone that will reply quickly. :)
Obrigado pelo conteúdo! Em relação ao colocar o Shelly dentro da caixa, não há problema de tamanho? ou ficar muito junto com os outros fios?
Obrigado! Vai depender do tamanho da caixa. No meu caso ficam mesmo à medida. Fica tudo muito juntinho e por isso é que tento meter o shelly o mais perto possível do interruptor.
If you get a "Device failed to connect or include" error message when you want to add a new device jus try it from another phone. The app is very buggy but from another phone was successful.
Funciona igual com iluminação?? A ligação??? Penso que sim
That was very helpful, thanks!
Thanks! I'm glad you found it useful!
Do you know how to control Shelly 2.5 via voice control (Google Nest Hub)?
I’m using it with Alexa. I know it suporte Google but have not tried it myself.
Hi friends, can I use din version ? (I build my new house and I have all wire from switches and electric blinds to switchboard..) I found shelly 2 pro or shelly 4 but is alternative to shelly 2.5 ?? Thanks !!
Yes! It also supports Roller shutter mode.
Parabéns pelo excelente tutorial. Tenho 5 estores, em todos eles tenho 6 fios. Julgo que isto se deva ao facto de ter um interruptor central que comanda todos os estores em simultâneo. Existe algum tipo de tutorial sobre esta minha situação?
Obrigado pelo feedback! Aquando das minhas pesquisas para instalar um shelly 2.5 nunca me deparei com um vídeo desses :(
Penso que o melhor será meter um post com fotos no Shelly support group: facebook.com/groups/ShellyIoTCommunitySupport/
Normalmente o pessoal costuma responder rápidamente.
Thanks
Is it possible to define an offset value to the shutter? E. g. to define the shutter to open 50% or any other value?
Yes, you can calibrate and choose the %.
Great video, but there is one issue. The switch on the video has 2 x STOP and 1 x UP and 1 x DOWN. The Shelly only has 2 x Switch outputs. The problem I have now after installing the Shelly 2.5 is that Shutter doesn't stop when I push the STOP button.
Without the Shelly I can stop the roller shutter by pushing STOP, with the Shelly the STOP doesnt work.
I saw you have switch Efapel 21291, I have 21290.. I that why?
HI Paulo! Thanks for your comment! I think the only difference between the 2 EFAPEL buttons is that in mine (when doing it without Shelly) I have to manually stop before activating the opposite action. I think in terms of connections to the Shelly they are probably the same. I'm thinking if it might be a configuration on the shelly side. How do you have your Device Type, Input Buttons Mode and Button Type? Mine are set to Roller Shutter, Open & Close Buttons and Momentary.
Ola. i presume this works with Shelly 1, right?
No. You need a Shelly 2.5 or Shelly Plus 2PM.
Great video!
Thanks! I hope it was useful!
Thank you very much, very clear very good videos keep it up
Thanks! I'm glad you enjoyed it!
Good video.
But what can I do if in the switch there is no N wire, just the L and the on/off wires?
Hmm, not sure. With Shelly 2.5 you need the N wire. There are other shellys that do not require N like the Dimmer.
Maybe ask here - facebook.com/groups/ShellyIoTCommunitySupport/about/
super helpful community!
You will need to thread another line for the N. There are smart devices now that don't require N with some electrical "magic" but I think they work for lights. Not sure if it will work with motors...
What diameter are these wires? Will 0.75mm work?
As far as I remember 1.5mm and 0.75 for the roller shutter.
@@ktulinho thanks, much appreciated!
Tenho um shelly a funcionar, mas agora com os botões físicos não consigo parar a persiana a meio (apenas abre/fecha tudo). É suposto? Com a aplicação consigo controlar tudo direitinho
Que tipo de butões são? São parecidos com os do vídeo? É suposto parar qdo os butões ficam "off". Pode ser alguma das definções do shelly na aplicação. Por exemplo, tablez a opção button type. Ou mesmo o modo de funcionamento (relay ou roller shutter). Aqui vai um screenshot com as definições que tenho no meu imgur.com/a/akT5mE4
Espero que ajude!
Perfect. My applause.
Thanks! I hope it was useful!
Muito Bom !!! Tenho 2 Shelly para montar apesar de o interruptor ser diferente (botão unico para subir e descer) espero que ajude. Obrigado pela partilha
Obrigadi! Nas ligações é capaz de ser parecido. Na aplicação é que poderá ter uma configuração diferente. Na minha está assim: imgur.com/6CJKsDm
Qualquer dúvida aivsa!
Your explanation is very crisp and video is very clear. Is the setup (color coding of wires) for Germany? Can you also do similar videos for Shelly 1/1PM.
Hey! Thanks! I'm not sure the wire colors are the same. Here N ia blue and L is black. What were you looking for regarding Shelly 1/1PM?
Obrigado!
Can u use this for a sunscreen aswel?
I suppose so. How are the open and close buttons?
ktulinho i h’ve try it works the same . S1 en s2 are for open and close you can then calibrate the amount of time it needs to open/close ur sun screen
Exelente tutorial. Mais claro que isto, não há, realmente. Fazem falta mais videos destes. No entanto reparei que aos 2:04 é mencionado, na narrativa, que no O1 liga o cabo castanho, e no 02 liga o cabo preto, mas na imagem vemos o inverso a ser executado. Mas mais adiante, aquando da ligação dos cabos mais pequenos, tudo bate certo com o video, portanto assumo que tenha sido erro de narrativa. Certo? :) Abraço e MUITO obrigado mais uma vez.
Muito obrigado! É provável que me possa ter enganado.
@@ktulinho Zero problema. O video é mais do que claro. Obrigado mais uma vez!
so did you fit it into the wall?
Yes! I had to make the connection wires small enough to fit everything inside :)
will this make ANY "dumb" shutters with just a basic motor into a smart ones ? do I understand it correctly ? :)
Yup, that's what happened in my case!
Obrigado pelo tutorial :)
Obrigado! Espero que tenha ajudado!
Excelente Video. Obrigado.
Obrigado! Espero que tenha ajudado!
Boa!
Obrigado pelo feedback!