HOW TO JACK UP A VW CLASSIC BEETLE - IMPORTANT TIPS FOR JACK STANDS AND SAFETY - VW Super Beetle
ฝัง
- เผยแพร่เมื่อ 23 พ.ค. 2024
- THIS IS FOR ENTERTAINMENT PURPOSES ONLY.
Any alterations you do to your vehicle is your responsibility!
I am not responsible for the work you do on your car.
Donations to help support the video content, please click here:
www.paypal.com/donate/?hosted...
Check out the Members...Tshirts, And Apparel! Thank you!
www.bonfire.com/store/sladesb...
For A Members Quality Sticker: You don’t have to do anything special to be a member, just be subscribed to the channel & grab your members sticker! 👍🤗 They are high quality vinyl. If you want your sticker they are $4.00 free shipping in the USA ( outside the USA $5.50 free shipping) you can go to:
sladesvwbeetle.com/sticker/
My Website:
sladesvwbeetle.com
Friends Website:
www.superbeetles.com
www.allaircooled.com/
#vwbeetle #vwbug #aircooled #sladesbeetle #beetlerestoration #vwclassicbeetle #classiccar #vintagecar #restoration #vwlivechat #vwwillitrun #vwbeetlebarnfind #vwbus #vwkitcar #vwghia #vwfastback #vwstrokermotor #vwsalvageyard #vwhowtovideos #vwdiyvideos - ยานยนต์และพาหนะ
Thanks!
Thank you very much for the generous donation! I truly appreciate it.
Yes to jack maintenance please and great video
Thank you, I just put it up.
Boy, this video is as controversial as the oil debate. The standard issued VW jack works perfect and as you mentioned you need to have a solid frame. But I used it only for changing a flat tire on the road, if that's all you have. For shop work like pulling the engine, another debate would be which end do you lift first? I always used a floor jack and lifted the front end first. Again on a solid frame as you mentioned. Then lifting the rear to keep a level balance, I use one of the do not lift points you pointed out, so I'm not trying to lift one side of the car while the front end is on jack stands. I lifted from the engine to get the height to put the jack stands on the torsion rails needed to be able to slide the engine out of the engine area and sideways under the fender well area. I still use the floor jack when removing the engine, I count on the jacks plate to swivel when pull the engine loose from the mounts and transmission shaft. Wiggle, wiggle. I had no luck using a motorcycle lift for this. Because some motorcycle lifts only rise up to 11 inches and some go 33 inches. I got the cheap lift....wrong one. A floor jack also has limits, which mine happens to lift to 36 inches, and then with a flat board on the jack I get an extra half inch. I tried using the motorcycle lift to get the engine out, but had no luck because of no wiggle, wiggle play. Using the motorcycle lift and lifting the engine to mount the engine on a stand or close to the stand's mounting height helps. I would like to see your experience on the Motorcycle lift. Great video and on a subject that no one has covered that I know of. I think this is helpful, especially for someone new to working on beetles or any vehicle, safety is important. (HF) had the faulty jack stands and might have been corrected by now.
Thanks for posting my friend! I have to put that motorcycle jack together, I got a little behind here. I remember using the factory jackpot on my 68 when I was a young kid. Of course, just to change a tire like you said. But everything was brand new. I just tried to caution people that don’t know any better now,and end up with a little incident. Lol I hope you’re doing well my friend.
Just got a 68 beetle and I can't say how much help you've been even though I haven't even started working on it yet. Thank you!
I’m glad to hear that, thank you for taking the time to leave a comment.
I like the two tone red and beige look myself. If not for the factory paint status of my '72 I would do that scheme on mine. I just can't bring myself to get rid of the happy yellow. Don't go with black, especially if Heather doesn't like it. Save that for another vehicle.
I heard at one point that people with black cars have sexual issues 🤣😂.
Thank you, my friend! I really like the two-tone idea. I just seen that sat in black and it drove me crazy for a short period lol thank you so much for always being here.
Yes to trying the flat black, and also a yes for the jack maintenance. My dad showed me how to do it when I was a kid, but I honestly don’t even remember 😂
Thank you so much! The video just went up moments ago.
Id like to see the jack Maintenace as well
I actually actually just put the video up.
Thanks for the video. On your paint I like to see the two tone but you do what you want..😁😁
That’s probably what’s gonna happen, my friend! Thank you so much for being here.
As usual a video full of useful tips!
Thank you so much, my friend! I truly appreciate that.
@@SladesVWBeetle I missed getting info on your summer get together, where can I get the date and location? Thanks!
@@bobsbarnworkshop send me an email:
Sladesbeetle@yahoo.com
Thanks - Slade for briefing us on jacking points and the use of jack stands ----- ought to mention if not in the garage ---- and one is in the yard ---- look for a level spot if you can --- use plywood pieces larger than the base of the stand ---- once up and on the stands ---- shake the --- H____ --- out of it --- MAKE SURE --- it is solid and not coming off the stands ----- I had a friend --- in his backyard working on a Toyota Pickup ---- jack stands raised to their max ---- ground was NOT flat ---- a slight slope ---- taking out the Transfer Case --- wiggling some --- front wheels off ------ Well ----- too much wiggle and down she came --- front suspension on his chest ---- garage was quite a ways from the house ----- no one could hear him calling ----- Coroner said he was pinned there for several hours ---- nobody from the family came out to check on him ---- not sure how long he was there before he passed on ----- As for paint the scheme ----- THAT ---- will be between you and Heather ---- not swaying you one way or another ----- Good luck there! ----- Well ---- hope you have a Good Memorial Weekend ------ Do a BBQ ------ Enjoy ------ Rodney
Oh my! That is so sad, I am so sorry to hear that! I knew somebody, not on a personal level, that a very similar thing happened to. It was actually in his garage. His wife didn’t hear him screaming. They found him deceasedfew hours later. Thank you for taking the time to post my friend.
Actually I’m interested in Jack maintenance because I have the same one and know they need care to keep them safe to use
Absolutely! I actually just put the video up.
@@SladesVWBeetle very cool :)
The satin black will look amazing.. I want to do a pickup truck in same way... Slade thx for bringing us along.. Take care and God Bless...
P.S. if you do a jack maintenance video, I'll watch it....
Thank you so much for the kind words, my friend. I truly appreciate that! I actually just put the jack maintenance video up, it’s an extra video this week.
God Bless my friend! 🙏
@@SladesVWBeetle just finished watching it... Thx for posting...
Thanx Slade I needed this video
Thank you, I’m glad it was helpful!
Very informative video thank you
Thank you very much, Bob!!
Great topic and great video! I picked the same jacking spots on my super beetle convertible as the standard super - as you showed, so I feel better now. lol It's always good to get confirmation. One point on the jack stands, is that they now REQUIRE the extra pin on the lever operated stands. It might be rare, but the ones you showed under the front, did not appear to have the extra pin (just imagine laying underneath and accidentally kicking one of the levers - down it goes).
At least mine lock in place and they don’t go down unless you pull it up while turning the lever.
I didn’t know that most of the stands came with a pin now. Which is a nice addition. The ones that were under the front of the car, I have had for quite some time. They do make me nervous. I’ll be honest. I should probably get a second set that are more safe. Thank you so much for chiming in.
Good advice and very thorough. Thanks for putting this together.
Thank you very much! I truly appreciate the kind words.
I always watch to the end! Great little tidbits at the end. Great video!
Thank you so so much, my dear friend, I hope you have been doing well!
I like the 6 ton jack stands for the height. They go high enough to clear the engine out the back
Yes, you are right brother, those jackstands are definitely much better. I believe I’m going to get a second set.
I carried a scissor jack and a 4x4 cut to length to use as a jack stand in my 64 bug. I have my Craftsman jack stands and they are 3 ton stands and i have never purchased the Harbor Freight stands that were falling down.
I couldn’t remember during filming. His jackstands were falling down, yes, it was definitely harbor freight! I like carrying my scissor jack especially to the junkyard. Makes it a little easier for me. Thank you so much for taking the time to comment.
Nice vid! Red and white gets my vote. I’m on board with a “jack maintenance “ vid. See ya.
Thank you for chiming, and I appreciate it!
Great video thanks for the tips… I say hands down Red and Cream two tone …it’ll look amazing!!!
I agree, my friend, after talking with Heather that’s absolutely what I’m going to do.
Great video Tony! Thank you for sharing what type of hack you carry. I carry a small big red floor jack, and 1 jack stand.
Thank you so much, my friend! I like to share ideas, and also, I like to hear ideas, thank you so much for being here.
Great video Slade. Please do the jack maintenance video. I think the black with chrome for your beetle would be amazing.
Thank you for chiming in, and I just put the video up for the jack maintenance.
As usual, great video! I would go with Heather’s choice of red and white. I do like the jack stands with the pin for extra safety.
Thank you so much for chiming in! Yes, I would have to agree with the red and cream, I think Heather is on some thing. And yes, those jackstands are very nice. I think I’m going to get a second set for the front.
Talking about motorcycle jacks; did you see Mike Fn’s video on the little carts he made to wheel around the motors? Fantastic! I like your original two tone scheme for the car.
Yes, I believe I did it had the metal wheels? I follow him, he’s a really good guy.
Look up "2 tone vw bus gloss black with satin black". If you like the satin you will love this!
I’ll be on Google momentarily lol trying to find out what that is. Thank you so much for being here.
Matte black (satin black) would look amazing with a 2 tone in red. Cream would be a safer option but I say step out of your comfort zone and go with matte! ( but I would let heather make the final decision 😂lol) that’s the ultimate safer option lol love you guys 23:01
Much love, my friend! Thank you so much for the kind words! Heather is insistent on the red and dark cream, so I guess I better go with that to be safe. Thank you so much for being here.
Two tone for sure.
Thank you so much, my friend for chiming in!
Satin black and red. 👍
Thank you so much for chiming in!
Jack maintenance? That reminds me. I need to call my son.
I actually just put that video up about an hour ago! It’s an extra video this week.
good video my friend. safety is a big deal for working on a car.great explanation on everything.
i guess that heather wants the two tone and you the mat black, i feel a big dilemma here lol.
Thank you so much, my friend! Safety is the number one thing! Especially when we do the things we do on cars. I hope you are doing well, my friend! I think we’re going to be staying with the two-tone lol.
@@SladesVWBeetle yeah i’m very happy that you will do the two tone on chaos. That will be a nice car WHEN it’s done 😉😉
@@VWBEETLEOVAL1955 thanks my friend! I wish my back would feel better so I can get more work done. I hope you’re having a great evening.
Take care of the back, you only get one of them.
nice job. lets see it.
Thank you, my friend!
Red is very common...but rich chocolate Brown with the cream...
Oddly enough, I like a dark brown with metallic and cream. I think it is very nice. Thank you for commenting.
Thanks, Slade! One question: I have a winch in my garage moving on a beam. I was thinking of using that in order to lift the rear of my 1302 to help out getting the engine out. Should I use the rear bumper mounting points to lift the rear once the engine is out? Thanks again!
Peru Green....('69 only color, I believe). I know that's not on your list, but...just had to put it out there...
Thank you for putting it out there. I truly appreciate it my friend. I’ll have to look up that color, I sincerely never heard of it before.
I like the satin black but you could also do a two tone of the satin and gloss black would look really good. I think Haptic Garage showed one at a show and VW Life also had one on there ch. IMO that almond would give it a girlie vibe
Thank you so much for chiming in my friend! I liked the satin black when I looked online, and seen one with chrome and red wheels, caught my attention.
Hey! I use 6 ton jack stands most of the time, not so much because of weight capacity but because of the wider base! My concrete driveway has a bit of a slope to it, so there is no such a thing as “too safe”?
Oh, I agree brother, we can never be too safe! I’m going to get another set of those 6 tons, I really like them a lot. I have a little bit of a better safe feeling when I’m underneath.
Satin black looks great , just saying 😂
Thank you so much! I appreciate you chiming in. I hope you’re doing well.
I'd like to see a video on floor jack maintenance. I have one that doesn't lift all the way any longer and another that lifts ok but bleeds off pressure without unscrewing the handle.
I actually just put that video up my friend! I hope it’s a little bit helpful.
@SladesVWBeetle I got the notification for it, I'll be watching it later this evening.
Thanks!
Your videos are fun to watch and super helpful.
Thank you so much for the kind words. I truly appreciate that. I hope you have a wonderful upcoming weekend.
@SladesVWBeetle I'm hoping to buy an older rail buggy this weekend. It has a bus trans but the engine barely runs. Exactly what I've been looking for.
So yes my weekend is looking good!
@@goldentrunnell7450 Outstanding!!!! I hope it goes well for you, my friend, I truly mean that.
Thanks for the video, very important and thanks also for the super beetle info too! Paint: ever considered flat or satin and gloss black two tone? ...just sayin'.
Oddly enough, somebody else brought that up, they seen a bus painted that way. I’m gonna have to look on Google. Thank you so much for being here, my friend.
Stick with your colors, but how would you feel about doing one matte and the other satin?
Good idea, I actually never thought about that. I could always do a clearcoat, satin, and the other one gloss, or matte.
Black Satin no doubt....
Thank you for chiming in Barry, I appreciate that.
Hey Slade! I have some questions about wheels. I'm looking to turn my 72 into an overland/road trip adventure rig and want to replace the beat up aftermarket wheels currently on it. Im aware class 11 has some pretty solid wheels but my question is if they're the best for about 75/25 road/gravel mix. I ask because it seems rally cars all run some pretty reliable gravel wheels that are similar but differ from the class 11 sets, and with the regulation of the 11s whether or not they're the best they could be. What are the advantages of running a VW specific wheel as apposed to modifying the bug for some wrc type rally wheels. Thanks! (I've been looking at a set of BRAID WINRACE TA for example)
Oh my, I wished I could be helpful my friend, but I don’t think I can be. I’ve always ran stock wheels, sometimes stock wheels, a little wider, and eight rims. I have never did what you suggested. But if you do post on the Facebook community, Slades, VW community. There’s a lot of rally guys on there and stuff like that would definitely chime in.
Thank you!
@@codyrants266 here’s the link, my friend!
facebook.com/share/wHSU3sigY4hdpdvn/?mibextid=K35XfP
Sorry, Slade, I'm just not a fan of the satin paint. But, if you can convince Heather, more power to you. She'll call it in on a later favor, know that for a fact, but good luck.
Thank you my friend. I hope you’re doing well! We are going to stay with the two-tone we had talked it over, and I agree. I seen a few photos of satin black and lost my mind momentarily lol.
To each their own, but i feel the satin black w/red wheels is over done. But make your car to your preference.
Thank you for chiming in I truly appreciate it! Heather is insistent on the red and dark green so the two-tone will be! Thank you so much for being here.
No?no satin black
Thank you for chiming in my friend.