Bro yeanukum idhey prob,self motor run aagudhu but self start agala,idhuku yeavolo agum ketta 5000 part mattum soldtanga RE service center Mela nambikai illai.nenga change Panna part yeavol price?
I recently changed this bearing, bought from Amazon, it didn't work for 400 kms, again failed. There were no wear & tear marks on the gear and bearing seats, even then it failed. As a bike user i wouldn't recommend changing the bearing only, mechanics will recommend changing bearing only, because then can charge you again for fitment of the assembly, so think twice before changing the bearing only, change the assembly only genuine /non genuine.
Thanks for your information bro 🙏 This case will not happen for everyone bro. I have changed only bearing in my friend bike. Still now there is no issues bro. Before changing the bearing we have to check gear condition bro. Based on that we have to change. Bearing alone available in retail shop. Original Royal Enfield parts. Online la maximum they selling after market or first copy item. So we have to think of that also bro.
Bro am fed up with this oneway clutch system In royal enfield....I have 13yrs old r15 also,still not even single mechanical problem occur...but royal enfield sucks
Bro ennoda bike la fzs v1 chain sprocket connect pandra rode replacement pannunen bro, andha time la irundhu oru tub tub nu noise varudhu engine sidela, clutch puduchu gear potta noise arrest aaguthu, clutch Bell play nalla iruku bro adhuvum check panniten, vera enna problem ah irukum bro
Bro unga video pathu tray pannen but clutch plate bold ku use panra spanner illa ok close panitu kadai kudukalamnu patha case close agala mela join agala
Chain sprocket you can change after 25k kilometers. But for clutch plate and on way clutch there is no specific time limit. You can change it once you feel its not working properly.
Hi bro, i have long time problem in my thunderbird 350 i.e riding bike with pillion the noise came from the engine near small chain sprocket. If riding the bike single there is no noise. I almost given the bike to two RE local machanics there where unable to find the exact issue where the sound come from. If you have any similar experience of this issue please guide me how to resolve this issue.
Yes it's resolved myself, the solution is remove the back wheel and given to wheel alignment they tightened the spokes make the wheel aligned properly. When we have the overweight the wheel is slightly bending that affects the chain proper movement it create noise. Please check your wheel alignment
Hii bro🤝.. oneway clutch la andha ball bearing matum change panra mari irkuma adhu prices?? Ella set ah matha evlo agum bro Gear shift um tight ah iruku 6months once service paniren..
Hi sir my bike selpstart problem vander clutch gear same problem. sir total gear assembly (or ) suprit bring available sir witch shop sir houmany cost ???
Bro, unga video pathu change panniten semma, But 3rd gear la porapa chain sound varuthu bro clutch side, Na ethavathu maththi potutananu therila Sound varuthuna ethunala nu solla mudiuma bro
Nice detailing bro.. I own RE Classic 350 BS6 2021 model. I am facing a problem like sometimes engine stops while riding and wont start for sometime after that. After engine stops like this, even injector sound when we turn on the key, won't come for few mins. After trying multiple times by switch on the key or engine on/off key, and when I start to hear injector sound, engine will start in both ways (kicker and self) properly. Told many times with RE service center but it's not fixed. Please let me know if you have thoughts on this problem, thank you.
Hi bro... In my bike same problem..may I know a price of one-way clutch ball bearing? My mechanic told to change full assembly of one-way clutch.. I asked in shop he told 5000 rupees.. so only I ask you bro...
Bro ball bearing only means. It will cost around 600rs. If you buy full set means it cost around 4500rs. Based on the shop. It is not compulsory to change the full kit. If your bike completed few kilometers only means. You can change that ball bearing alone. If you completed 30k kilometers in your bike. Then better you change the full kit. That's good
@@tnmotorider3910 Bro, first I would like thank you for giving a very clear on this case. Truly appreciated 🙏 I have a question: I'm using Bullet Electra 2016 model. And for me to do this kind of task at home by seeing ur video and advise, I would need to know the Tools and Spanner details for me to do this job. Please can you help me with Tool Kit and Spanner details that is used for my Bullet electra. Possible pls can you help to share some link like Amazon or Flipkart for us to buy these tool kits. Thanks in advance 🙏
@@tnmotorider3910 ok bro thanks .. but na unga video pathu one month before nane bike ah remove panni ball bearing only change panniten bro .... 900 rs aachuRE original 😊 innnum super ah oditu irukku Around 1000 kms oti iruppen thank you very much bro
Bro one way clutch problem erundha adikkadi battery week aguma lost 6 month changed my battery running just 3 month only again battery problem service person telling one way clutch change pannalana seekarama battery problem varum idhu unmaiya bro pls reply
No bro. There is no connection between one way cultch and battery. Suppose self motor is not good naa there is a chance for battery drain. Battery drain problem mostly come due to rectifier check that bro. When you click self switch and motor rotate freely naa no issues. If it feel tight then your bike battery will drain bro in rare cases
Nice explanation bro I ride a 2016 classic 500 . No issues so far . But today , I did self start 3 attempts , 3rd attempt was successful and then when I raised the throttle , there was a loud metallic clang sound and then engine switched off . I tried again and engine started . What do you think the issue will be ? Yesterday I did kick start and I had a big kickback . Again starting after that , no issues
Bro same problem for me also...but for me in shop they are saying cant get ball bearing alone...they will give it with set only itseems ...the whole one-way clutch only they will give itseems bro....where did u get this ball bearing alone bro? Please help bro
Bro neeinga enga irukainga? en bike la 2years mela intha problem iruku na innum change pannala showroom la than eppavum service pannuven veliya pannurathuku konjam bayam enaku neeinga change panni kudukka midium ma showroom la keatta 5500 sollurainga full ah than change pnnuvom nu sollitainga. Small problem nalum avainga parta ah sales pannurathuku full ah change pannirainga. Enaku change panni Tara midium ma enku therium ithu Ella bike Kum work out aagum nu neeinga change panni paruinga work aagala na no problem.
May be bro. Suppose the one way bearing got damaged heavily means like that sound will create while rotating. Check it as soon as possible bro. Because there is an high chances for other parts get damage
Maximum change at 10 to 15 thousand kilometers bro. In between this you have to just clean the spark plug edge and adjust it that's all. Thanks for watching and supporting our channel 👍
Bro.. engine oil drain pannadhuku aprm ma.. same oil la podalama?? illa new oil podanum ma?? Then one way clutch problem ku full set matha venam ma?? ila ball bearing change panaley problem solve ayiduma??
அருமை அற்புதமான தமிழில் பிரமாதமான விளக்கம் மற்றும் செய்முறை மிக்க நன்றி வாழ்த்துக்கள்.
நன்றி நண்பா😊
உங்கள் உதவி எங்களுக்கு மிகவும் பயனுள்ளதாக இருக்கிறது நண்பா மிக்க நன்றி🙏💕
Thank you ✌
Now a days the mechanic are very worst bro... thanks for your videos...👌👍
Thanks bro 😊
வணக்கம் நண்பரே இந்த கானெளி
அற்புதமானது சூப்பர்
Thanks bro✌
self start semma responsive ah iruku bro👍👍👍
👍
Bro oru help bro, Same problem than bro enoda bike layum , but service centre la full sparg clutch maathanum nu soldranga bro
தமிழில் அருமையான விளக்கம்
அன்புச் சகோதரரே ராயல் என்ஃபீல்டு தண்டர்பேர்டு 2010 மாடல் இன்ஜின் எப்படி இருக்கும் அது எந்த டைப் இன்ஜின் தயவு செய்து பதில் கூறுங்கள்
Iam bike mechanic from poombuhar bro..home la service panren..normal tools pothuma ila stopper yethavathu venuma ??
மிக அருமை தெளிவான விளக்கம் நண்பா. வாழத்துக்கள்.
Bro yeanukum idhey prob,self motor run aagudhu but self start agala,idhuku yeavolo agum ketta 5000 part mattum soldtanga RE service center Mela nambikai illai.nenga change Panna part yeavol price?
One way clutch ball bearing price and its labor cost.can u tell me the overall cost bro
Ball bearing rate 550rs to 600rs based on shop. Labour cost around 300 to 500 based on the location
Bro I have also same problem . Self is not working n giving the sound only. Can you share your contact number pls. Thanks.
9092236922
Sari tha bro..RE service centre le yee 4,500 solrange
Full set change pannanuma illa ulla irruka ball set matum mathuna pothuma bro
Bro same self start agula ball Bearing matum change panna podhuma ila total set change pannanuma online link erudha send pannuga..... Plzz
I recently changed this bearing, bought from Amazon, it didn't work for 400 kms, again failed. There were no wear & tear marks on the gear and bearing seats, even then it failed. As a bike user i wouldn't recommend changing the bearing only, mechanics will recommend changing bearing only, because then can charge you again for fitment of the assembly, so think twice before changing the bearing only, change the assembly only genuine /non genuine.
Thanks for your information bro 🙏 This case will not happen for everyone bro. I have changed only bearing in my friend bike. Still now there is no issues bro. Before changing the bearing we have to check gear condition bro. Based on that we have to change. Bearing alone available in retail shop. Original Royal Enfield parts. Online la maximum they selling after market or first copy item. So we have to think of that also bro.
@@tnmotorider3910 okay bro, i will buy bearing from RE original spares and fit.
Okay bro 👍
Buy from bearing company
Bro am fed up with this oneway clutch system In royal enfield....I have 13yrs old r15 also,still not even single mechanical problem occur...but royal enfield sucks
Indha video la neenga change panuna spare oda aprox rate ena bro
Bro yennoda bike la same problem
Cost yavlo agum bro aduku sollunga bro
Bro ennoda bike la fzs v1 chain sprocket connect pandra rode replacement pannunen bro, andha time la irundhu oru tub tub nu noise varudhu engine sidela, clutch puduchu gear potta noise arrest aaguthu, clutch Bell play nalla iruku bro adhuvum check panniten, vera enna problem ah irukum bro
Super.pro.andavar.mechanice.manaparai
Bro rear suspension services video venum
spanner tool size for both one way clutch and clutch sollunga bro
Bro unga video pathu tray pannen but clutch plate bold ku use panra spanner illa ok close panitu kadai kudukalamnu patha case close agala mela join agala
Top la self motor lock erukum bro. Check that
Bullet oil epadi mathurathu nu video podunga Sir
Bro already video iruku bro. Check in the play list bro
Royal Enfield Thunderbird 2010 model engine Eppadi irukkum please reply
Nice engine bro. But check the engine and buy bro
Hii bro en bike 45k kilometers odiruchu valve sound varuthu bro atha adjust Panna evalo amount agum
Pls tell Royal Enfield classic
How many km do change this item
Chian sprocket
Clutch plate
One way clutch
Chain sprocket you can change after 25k kilometers. But for clutch plate and on way clutch there is no specific time limit. You can change it once you feel its not working properly.
Fulla oil remove bannanuma old oil use bannalama
COIMBATORE la best mec refer panunga thala
Thanks brother 👍🙏🏾
Hi bro, i have long time problem in my thunderbird 350 i.e riding bike with pillion the noise came from the engine near small chain sprocket. If riding the bike single there is no noise. I almost given the bike to two RE local machanics there where unable to find the exact issue where the sound come from. If you have any similar experience of this issue please guide me how to resolve this issue.
Hi, Bro. I got your call bro I will call you back.
Bro I'm also having the same issue did u fixed it bro
Fix panna sollunga bro
Yes it's resolved myself, the solution is remove the back wheel and given to wheel alignment they tightened the spokes make the wheel aligned properly. When we have the overweight the wheel is slightly bending that affects the chain proper movement it create noise. Please check your wheel alignment
@@mnagaraj1983 thanks bro
Broo idhae same problem dhan en bike layum... Edhunaala indha problem varum bbro ??? Andha one way ball bearing how much ??
One way cultch rate 550rs bro. It's a manufacturing defects by royal Enfield bro. Hope they have updated the quality
Indha issue ku show room pona ball baring mattum mathamey full one way clurch mathuranga bro adhu price adhigama vardhu
Based on the condition method will change bro. How many kilometers are the bikes completed bro
Bro Electra 2018 ku self motor problem evlo wages agum
In some places they will service the old motor itself bro. Price will differ
Bro i have the same problem i want to change one way fully or ball bearing
Hii bro🤝.. oneway clutch la andha ball bearing matum change panra mari irkuma adhu prices??
Ella set ah matha evlo agum bro
Gear shift um tight ah iruku 6months once service paniren..
Only bearing naa 550rs bro full set naa 4500rs to 5000rs
Hi sir my bike selpstart problem vander clutch gear same problem. sir total gear assembly (or ) suprit bring available sir witch shop sir houmany cost ???
Only ball bearing means it will cost you around 600rs. Suppose full kit naa it will cost around 4500rs bro. Based on the condition you have to change
Bro, unga video pathu change panniten semma,
But 3rd gear la porapa chain sound varuthu bro clutch side,
Na ethavathu maththi potutananu therila
Sound varuthuna ethunala nu solla mudiuma bro
Chain tight la proper ah iruka bro? Have you put the chain tensioner properly?
Can we follow the same procedure for Thunder bird 350
Yes bro
Very good ❤
Thanks 😄
Nice detailing bro..
I own RE Classic 350 BS6 2021 model. I am facing a problem like sometimes engine stops while riding and wont start for sometime after that. After engine stops like this, even injector sound when we turn on the key, won't come for few mins. After trying multiple times by switch on the key or engine on/off key, and when I start to hear injector sound, engine will start in both ways (kicker and self) properly.
Told many times with RE service center but it's not fixed. Please let me know if you have thoughts on this problem, thank you.
Bro text me in Instagram . ID tn_moto_rider
O99o
Well said 🔥 learned from u
✌😍
Wonderful Bro
Thanks bro
Bro which tools kit set you are using ?
This one bro : bit.ly/3qBxOoB
Hi bro... In my bike same problem..may I know a price of one-way clutch ball bearing? My mechanic told to change full assembly of one-way clutch.. I asked in shop he told 5000 rupees.. so only I ask you bro...
Bro ball bearing only means. It will cost around 600rs. If you buy full set means it cost around 4500rs. Based on the shop.
It is not compulsory to change the full kit. If your bike completed few kilometers only means. You can change that ball bearing alone. If you completed 30k kilometers in your bike. Then better you change the full kit. That's good
Thanks for watching and supporting our channel 👍
@@tnmotorider3910 Bro, first I would like thank you for giving a very clear on this case. Truly appreciated 🙏
I have a question: I'm using Bullet Electra 2016 model. And for me to do this kind of task at home by seeing ur video and advise, I would need to know the Tools and Spanner details for me to do this job. Please can you help me with Tool Kit and Spanner details that is used for my Bullet electra. Possible pls can you help to share some link like Amazon or Flipkart for us to buy these tool kits.
Thanks in advance 🙏
@@tnmotorider3910 Neenga enga bro located ? Are u in Chennai?
Sure bro. I will share you the toolkit link tomorrow 👍 Thanks for your support
2012 Moddl thunder bird vachuruken brother. Same pblm in my bike. Tell us your number.
I am working for Rayal Enfiyld Company 🏍️🏍️🏍️
need one help bro
Bro ball bearing set enna price varuthu. Ennoda bike layum same problem bro
Bro total kit will cost around 4500rs to 5000rs
@@tnmotorider3910 ok bro thanks .. but na unga video pathu one month before nane bike ah remove panni ball bearing only change panniten bro .... 900 rs aachuRE original 😊 innnum super ah oditu irukku Around 1000 kms oti iruppen thank you very much bro
Super bro thank you ✌😍
Sooppar .... Good work👌
Thanks bro
Super sir.....
✌😊
Bro my bike star city athula self motor suthuthu ana engine connect pna self eduka matigi ena prblm ah irukum
Check one way clutch bro
@@tnmotorider3910 epd bro chk pntrathu
Open that one way clutch assembly and check the bearing inside that
Battery power is fine?
@@tnmotorider3910 self moti thaniya suthithu.. But engine connect pna suthama iruku
Bro one way clutch problem erundha adikkadi battery week aguma lost 6 month changed my battery running just 3 month only again battery problem service person telling one way clutch change pannalana seekarama battery problem varum idhu unmaiya bro pls reply
No bro. There is no connection between one way cultch and battery. Suppose self motor is not good naa there is a chance for battery drain. Battery drain problem mostly come due to rectifier check that bro.
When you click self switch and motor rotate freely naa no issues. If it feel tight then your bike battery will drain bro in rare cases
@@tnmotorider3910 thank you so much for your valuable reply bro
@@tnmotorider3910 bro please share your contact number are you Chennai ah bro
😊
Yes bro 9092236922
Passion plus took after 3 months carburetor cleaned engine started but idling has issue
Tune the carburetor bro
Explained well
Thanks bro
Very very thank you so much 🙏
Nice explanation bro
I ride a 2016 classic 500 . No issues so far . But today , I did self start 3 attempts , 3rd attempt was successful and then when I raised the throttle , there was a loud metallic clang sound and then engine switched off . I tried again and engine started . What do you think the issue will be ? Yesterday I did kick start and I had a big kickback . Again starting after that , no issues
That's not a problem bro. It's usually happens in classic bikes. If there is any issue with the one way clutch. Then self motor Start to slip
@@tnmotorider3910 thank you bro
Bro same problem thunderbird 350 bs3
Same method tha bro. Based on the kilometre bike completed
Nice work😍
Thank you ✌
Anna full one way clutch buying link venum anna
Bro buy it offline. Don't trust the bike spares in online
Bro kick start panum pothu or self start panum pothum engine la etho broke akura sound kekuthu bro
One way clutch Bearing fault naa kuda sound varum bro. So check it bro
Kiker tighta iruku bro self start panna mudila show room la kettadhuku one way clutch problem nu soldranga
Double check it bro may be it's one of the reason. You have to check other parts also
Thambi bullet 500cc kum same procedure ra pa sollu pa
Yes bro same process tha
Bro Enaoda bike la Power start motor work aguthu ana Bike start aga matikuthu showroom la motor set oda mathanum nu solranga ena pana bro ?
Motor working naa no need to change it bro. You can only change one way clutch bearing set bro.
@@tnmotorider3910 sure bro 👍
Bro same problem for me also...but for me in shop they are saying cant get ball bearing alone...they will give it with set only itseems ...the whole one-way clutch only they will give itseems bro....where did u get this ball bearing alone bro? Please help bro
It's available in online bro but I bought from retail shops near my house
Suppose one was clutch got full damage naa you have to change full set only bro. Suppose ball bearing only fault follow this method
Andha bearing matha evlo agum...?? Ennoda bike layum same problem... Nenga endha ooru and unga contact no kudunga...
Chennai bro 9092236922 bearing price 550rs when I bought bro
Bro one doubt chain tensioner adjust panradhu manual haa pannanuumaa
No bro. It's a auto adjustment
@@tnmotorider3910 ok bro TQ
Super ji
One way ball bearing cost enna ji?
600rs to 800 rs bro
Bro neeinga enga irukainga? en bike la 2years mela intha problem iruku na innum change pannala showroom la than eppavum service pannuven veliya pannurathuku konjam bayam enaku neeinga change panni kudukka midium ma showroom la keatta 5500 sollurainga full ah than change pnnuvom nu sollitainga. Small problem nalum avainga parta ah sales pannurathuku full ah change pannirainga. Enaku change panni Tara midium ma enku therium ithu Ella bike Kum work out aagum nu neeinga change panni paruinga work aagala na no problem.
I am from porur chennai bro. How much kilometre bike completed bro?
@@tnmotorider3910 31000 km completed bro
I m in chennai only if possible pls let me know.
Okay bro. I will. Let you know bro
@@tnmotorider3910 ok thank you
Can u plz send the link for bearing 🙏
www.amazon.in/dp/B07D1Q1THC/ref=cm_sw_r_cp_awdb_imm_4AWCNGQW83FGMGMCNPC6
Try this bro
Enaku self start use panum pothu and kick start use panum pothum oru sound varuthu.....like metal crash
Is it one way clutch problem..???
May be bro. Suppose the one way bearing got damaged heavily means like that sound will create while rotating. Check it as soon as possible bro. Because there is an high chances for other parts get damage
It's Ter any genuine after market parts available
Don't use after market spare for that bro. Use orginal itself
@@tnmotorider3910 ok bro
Bro clutch puducha noise varudhu bro classic 350 la. Any solution for tat??
Check the clutch plates and clutch basket rubber bush bro
Thanks bro
bro timing chain ila clutch chain ..... bullet ku time chain kadaiyathu..
Thanks for letting me know. Unfortunately I was told it mistakenly as timing chain. I also not noticed it in my video. Thanks for you bro 👍
Super bro
Great 👍
I am also having same problem in my RE , where can I get one way ball bearing
In retail shop it will available bro. But mostly they won't give it.
Same problem I have...locale 4,500rs kekuraga...bro..ithu romba athigam thane...avloo kudukalam bro reply must
Full set change pannanum naa this amount is fine bro. But most of the time only ball bearing tha pogum so that time 4500rs is high
@@tnmotorider3910 so eavalo agum bro antha bearing and athu kuda iruka elam seathu 2000 keakuranga
4 times na change panitan bro
நீங்க ஒன் வே கிளர்ச்சியில் பேரிங் மாற்றினாலும் ஸ்ப்ரிங் மாற்றினாலும் கொஞ்ச நாள் ஓடும் ஆனால் நிரந்தர சொல்யூஷன்ஸ் அது இல்ல நன்றி
Yes bro I know. But in some case this method will help for someone right soo only bro
Good one bro🔥
😊
How much Clutch oil need after replace
Bro my bike same problem one way helax pric evalavu
Full kit 4500rs bro
Hi Bro Clutch plate price solla mudiuma
Bro I don't know the exact price. I will confirm that let you know bro.
Hi bro ur video is very usefull. One doubt bro classic 350 BS3 ku spark plug evlo km once change pananum
Maximum change at 10 to 15 thousand kilometers bro. In between this you have to just clean the spark plug edge and adjust it that's all. Thanks for watching and supporting our channel 👍
@@tnmotorider3910 thanks for ur reply bro. Na used Himalayan vangalam nu iruken bro. Bs3 best ah irukuma illa bs4 vangalam ah nu solunga bro
Go for bs4 itself bro. Because bs4 is little bit new model and usage will be low and also mileage will differ. So go for bs4 bro 👍
@@tnmotorider3910 mm k bro thank u
Welcome bro
Tool what used bro
I think it's 18mm socket bro
Bro I have this same problem.for my bike how much cost for this one way cluch. Pls can reply
How much bro?
600rs bro only bearing
One way vouch mathurathukku avloo vathuchi bro
I changed only ball bearing bro and it cost around 550rs that time. Now the spare cost increased around 650rs
Ready pana ena cast varum bro
800rs bro
Bro bal baring evlo price varudhu
550rs bro
Superb 🥰👍👍🙏
Thanks bro
Nice😊
👍
Bro ...where can i buy One way clutch online ?? They're Charging 5500Rs for changing my one way clutch in showroom
Orginal will cost around that much bro. If you buy in online means. After market parts are available. It will cost you around 2500rs around that
@@tnmotorider3910 Do u have any link bro pls?
I will share you by evening bro 👍
amzn.to/36lW3iP
Bro try this link bro
Bro one way cluctch price Ena bro varuthu
600rs bro
Hii bro enakku antha sound varuthu but en bike start aguthu?
That is symptom of bad one way cultch bro. It will stop working within few kilometers
@@tnmotorider3910 tq bro ,bro one dought flipkart la antha bearing vangalama? Most of reviews postive ah irukku
Yes bro. You can buy
@@tnmotorider3910 tq so much brother ❣️
One way clutch replacement price evlo bro
4500rs bro
How much will that ball bearing costs
550rs to 600rs bro
Subscribed ur channel
Where will get ball bearing
Local automobiles la bro
How much oneway clutch pls
Full set 4.5k bro just ball bearing 550rs
Bro.. engine oil drain pannadhuku aprm ma.. same oil la podalama?? illa new oil podanum ma?? Then one way clutch problem ku full set matha venam ma?? ila ball bearing change panaley problem solve ayiduma??
Based on the condition both need to be change bro. If oil condition is good you can use same oil.
@@tnmotorider3910 ok bro👍
Bro your shop
Bro i am not running shop. Just doing service in my home while having free time
@@tnmotorider3910 ur from Chennai ah bro
Can you able to do service for my bike
Your location bro?
@@tnmotorider3910 ashok pillar near by ESI HOSPITAL
Super
Thanks bro👍
Thanks for watching and supporting our channel 👍
Same prblm in my bike also
Oh. Try this bro but only after check the condition of old bearing
Bro price yevlo bro varum
800rs bro
💞💞💞☝️☝️☝️☝️