Installing Smoke Colored LED Side Markers in my C7 Corvette

แชร์
ฝัง

ความคิดเห็น • 56

  • @maryrandall4460
    @maryrandall4460 6 หลายเดือนก่อน +1

    Very nice 👍🏾

  • @jacksondaniels8169
    @jacksondaniels8169 3 ปีที่แล้ว +2

    Plug and play means direct plug in.. if I have to bend pins I think I’d be looking else where for that product.

  • @Steveleanr
    @Steveleanr 4 ปีที่แล้ว +1

    Thanks for the video, I just ordered mine, they look nice in your video!

  • @Steveleanr
    @Steveleanr 4 ปีที่แล้ว +1

    Changed out today, thanks for the tips! A very easy mod.

  • @rongamel265
    @rongamel265 4 ปีที่แล้ว +2

    That looks great Scott!

  • @KCDale
    @KCDale 4 ปีที่แล้ว +1

    Purchased the ghost painted from oracle for my grand sport. Look awesome. Was difficult to install the front as I had to pull out the front clip due to the extra plastic cladding.

    • @Nomore76
      @Nomore76 4 ปีที่แล้ว

      Kirk Dale - What extra plastic cladding? I’m just about to order a set of Oracles (tinted, not ghosted) for my ‘17 GS and I don’t want any fitment issues...

    • @KCDale
      @KCDale 4 ปีที่แล้ว

      Nomore76 you won’t have any fit problem and mine look awesome. When installing the front on a grand sport you will have to pull down on front clip like the video shows.

    • @KCDale
      @KCDale 4 ปีที่แล้ว

      Check out the video from corvette918. He shows replacing his on a grand sport.

  • @Maximum1A
    @Maximum1A 4 ปีที่แล้ว +2

    Which brand did you buy that is causing the RF signal interference? Did you post a follow up video explaining the problem/fix? Finally, which brand of LED side markers did you get and from whom?

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  4 ปีที่แล้ว

      Here is the link to the lights I bought..
      www.ebay.com/itm/Smoked-Front-Rear-LED-Side-Marker-Light-Lens-Set-For-2014-2019-C7-Corvette/254332419850?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
      The lights are still working great!
      I have not done a followup video. But I am planning on it!
      Have a great day! Thanks for watching..

  • @imagineeverythingtwice
    @imagineeverythingtwice 4 ปีที่แล้ว +1

    thank you for making this video

  • @stingk5295
    @stingk5295 2 ปีที่แล้ว +1

    I Install the Morimoto Head & Tail lights and now my LED side Markers and Tail lights does not work! Any Suggestions!

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  2 ปีที่แล้ว

      How far away from Sacramento Ca. are you. We can fix it in our shop. It is a big job to fix it.

  • @dawsoja
    @dawsoja 4 ปีที่แล้ว +1

    I like the even look to them, and the blackout look during the day. But, at night, they are way too bright. Is it distracting when you are driving and seeing that in your side mirror on the road?

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  4 ปีที่แล้ว

      Hi Jack the curves of the fenders block most of it. I have not even noticed.

  • @stephendibari5010
    @stephendibari5010 4 ปีที่แล้ว

    Scott another great video ! These LED side marker lights are the way to go ! Hands down, will be saving this video also for my future C7 Stingray! Loving the Metallic red on your car and your wife’s Metallic blue is awesome... My first choice will be Artic White, but these 2 colors will be my backup 2nd & 3rd choices ! What are the names of these 2 colors ?

  • @SoberIrishman
    @SoberIrishman 3 ปีที่แล้ว +1

    You have a great channel. I havent seen every video so wanted to ask your personal opinion. I have a c6 GS 2013. Next year I want to add a c7, same Nite Racing Blue. Yours here, bueatiful color btw, is a Z51. Do you recommend the Z51 over GS or Z06? Just deciding before 2022. Thanks!

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  3 ปีที่แล้ว +1

      Thank you for watching!!
      Yes mine js a Z51 but as you know I made it a ZR1 clone. The GS and the Z06 are wide body cars. The GS had the same running gear as the Z51 it just has the wide body the Z06 is a beast all of its own.
      The Z51 and GS are both faster than you can drive, so it is really bragging rights!!
      I would say if Lou can afford it get the Z06, but trust me you will still be super happy with any C7. Even the bade model is a great choice if you are. Ot planning on tracking the car,and if you want to make any of them look like a Z06 just let me know, we can put all.of the parts on it!!
      Hope this helps!!

    • @SoberIrishman
      @SoberIrishman 3 ปีที่แล้ว +1

      @@THECORVETTECHANNEL yepp....thx again!!!

  • @Maximum1A
    @Maximum1A 4 ปีที่แล้ว

    A couple months ago you said you would post a video on how to fix the RF interference problem created by the LED Side marker lights. Did you get around to posting the fix?
    If not can you simple write down the fix then post it?

  • @leedimatteo5078
    @leedimatteo5078 4 ปีที่แล้ว +1

    looks amazing !!

  • @BBrown-gs8sv
    @BBrown-gs8sv 2 หลายเดือนก่อน

    Ok what did u bend to make the rear that u got stuck on

  • @maestro300
    @maestro300 2 ปีที่แล้ว

    I am just on the fence with these - they look as bright as brake lights and reminds me of underglows. I like attention but I have a feeling this could be annoyingly bright for cars next to you. Is there any side LED markers that are dimmer than these?

  • @isaac12638
    @isaac12638 4 ปีที่แล้ว +1

    Did you have any problems with the led interfering with the Tom's signal?

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  4 ปีที่แล้ว

      Yes as matter a fact I did with my 2014 C7 but not with my wife'ss 2016 C7, I did a follow up video to this one so check it out.

  • @rogerf4430
    @rogerf4430 5 หลายเดือนก่อน

    Any idea why none of my side markers don’t work? I can’t find any info about a fuse.

  • @johnwilliams-op6ix
    @johnwilliams-op6ix 3 ปีที่แล้ว

    I would like to know what front splitter you have on your Bette and where did you get it.

  • @hlu5780
    @hlu5780 4 ปีที่แล้ว +1

    how did the lower price (non Oracle brand) held up since installation? They can be up to half in price compared to Oracle from those on the market. Not sure if is better quality or just packaging. Most LEDs are pretty reliable in general these days. appreciate your feedback.

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  4 ปีที่แล้ว

      I will be doing a follow up video talking about them. They are still working great but they created a problem. The RF signal that the LEDS put out was making the Tire Pressure System to have problems when driving at night with the lights on. I figured out how to fix the issue. Very cheap and easy to do! Stay tuned for that video!!

    • @hlu5780
      @hlu5780 4 ปีที่แล้ว +1

      @@THECORVETTECHANNEL excellent! I'll look forward to your video.

    • @sshelbyy08
      @sshelbyy08 2 ปีที่แล้ว

      Have you posted how to resolve the RF issue? I'm waiting to see how to fix mine. It is incredibly annoying.

  • @rashedhamad890
    @rashedhamad890 4 ปีที่แล้ว +2

    Looks so cool,,From which website did you buy it

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  4 ปีที่แล้ว

      I got those off ebay but I have a follow up video that talks about them later.
      Go check that video out and I give you all the information in that one.
      Thanks for watching!!

  • @jeryart
    @jeryart 4 ปีที่แล้ว

    Hey great video!! Can you please post a link to where you got this on Ebay???

  • @MRANDYSANMAN
    @MRANDYSANMAN ปีที่แล้ว

    What brand did you buy

  • @PRmercado
    @PRmercado 3 ปีที่แล้ว +1

    What happens when you have the bulbs of the leds go bad can you replace them or do you have to get a new lamp and housing

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  3 ปีที่แล้ว

      You would have to get a new unit.

    • @PRmercado
      @PRmercado 3 ปีที่แล้ว +1

      @@THECORVETTECHANNEL thanks, your car looks very nice.

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  3 ปีที่แล้ว

      @@PRmercado Thank you so much!

  • @Madmouse28
    @Madmouse28 3 ปีที่แล้ว

    I have the made in China LEDs that are causing errors on the TMPS. What did you do to remedy the issue. I've put chokes and faraday.tape on the lights but still have the problem.

    • @THECORVETTECHANNEL
      @THECORVETTECHANNEL  3 ปีที่แล้ว

      Hi there,
      I actually cover that in a followup video.
      I had the same issue on my 2014 but not my 2016. I covered my lights on my 2014 with foil tape and it fixed the problem, but I ended up replacing the lights with Oracle lights from Verte Lights.
      Good luck!!

  • @mrpmj00
    @mrpmj00 4 ปีที่แล้ว +1

    They look cool when on but they don't have reflectors so I did not buy (Oracle version).

  • @donealable
    @donealable 4 ปีที่แล้ว +1

    Do you have a link to these?

  • @joeg9810
    @joeg9810 4 ปีที่แล้ว +1

    What type of mud flaps are those?

  • @johnbezzina5971
    @johnbezzina5971 2 ปีที่แล้ว +1

    I gave a c7 corvette I would like to talk to you thank you

  • @MiguelRodriguez-nt5eq
    @MiguelRodriguez-nt5eq 3 ปีที่แล้ว +1

    Start at 5:45 to get past all the blah blah blah for the first 5 mins to see install.. Lol

  • @isaac12638
    @isaac12638 4 ปีที่แล้ว

    Suppose to say TMPS