My Beelink U59 does not reboot and shut down, you have to unplug and wait 10 min or longer then plug it back in, and then you see a Beelink splash screen. Thanks for your video
Good video...i had Beelink N5095 the same situation and all that you told works fine for me...i back on My feet again...i tought that the mini PC and all data was lost.
Same issue with a b2pro and totally worked when I was about to give up. I thought the reset button was just a forced reboot. I even disconnected the battery inside but only resetting the bios as you did worked. Thanks!
@@hectormedina1962 the way it is explained by the end of the video. You don't have much patience, do you?😂 Just keeping the reset button for long (don't remember if it was 20s)
had the same issue tryed the fix didnt work , put the power supply into another socket powered on frig knows if it ultimatly did work or not but the U59 is working again ill say thanks
I have a different beelink mini pc model but it's the same pcb configuration. Resetting the bios but did not work. I bought a new power supply - did not work. Removed drive and memory, reset bios, and still not working.
Mine does turn on the power light, but doesn't send signal. Having it unplugged for a couple of hours makes it work. If the pc is turned off, I have to disconnect it from electricity. I do not recommend this brand.
Mate you dont know norhing about power supply, you said 12v/3A for beelink and you see that has 12v/9mah , away far that 9mah to 3A is supply fault not pcb, replace power supply and all be fine!
Excellent video!
I have submitted the U59 Pro issue to the company.
Thank you for your repair.
My Beelink U59 does not reboot and shut down, you have to unplug and wait 10 min or longer then plug it back in, and then you see a Beelink splash screen.
Thanks for your video
Good video...i had Beelink N5095 the same situation and all that you told works fine for me...i back on My feet again...i tought that the mini PC and all data was lost.
Same issue with a b2pro and totally worked when I was about to give up. I thought the reset button was just a forced reboot. I even disconnected the battery inside but only resetting the bios as you did worked. Thanks!
how did you reset the bios ?
@@hectormedina1962 the way it is explained by the end of the video. You don't have much patience, do you?😂 Just keeping the reset button for long (don't remember if it was 20s)
had the same issue tryed the fix didnt work , put the power supply into another socket powered on frig knows if it ultimatly did work or not but the U59 is working again ill say thanks
Excellent
I have a different beelink mini pc model but it's the same pcb configuration. Resetting the bios but did not work. I bought a new power supply - did not work. Removed drive and memory, reset bios, and still not working.
Same issue, think beelink have bad pcb
I unplugged it in blew my breath into the power port. It turned back on. We'll have to keep doing this every other day
thanks, pressing the clr cmos button for 5 seconds with a paperclip while unpluged worked for me.
Mine does turn on the power light, but doesn't send signal. Having it unplugged for a couple of hours makes it work. If the pc is turned off, I have to disconnect it from electricity. I do not recommend this brand.
same issue with mine. I clear the cmos did not boot up whatsoever. Not recommend 😂
Did you resolved your issue, if yes how did you fixed it, am having the same issue here.
@@Africa-in-ME did you find the solution?
@@Leo-wl2gg Buying these mini computers is wastage of money, mine died completely man.
@@Africa-in-ME What bad luck man, my power supply is too low I'm going to test another power supply I hope it works
Έχω ένα beelink gt1 ultimate και δεν ανάβει αν κάποιος μπορεί να βοηθήσει. Έχω κάνει το reset BIOS αλλά τίποτα.
Στείλτε το να το δούμε στο κατάστημα. Πληροφορίες και διεύθυνση φάινονται στο τέλος των videos. Δεν υπάρχει χρέωση για τον έλεγχο, είναι δωρεάν.
Πέταμα.
Τελος
not works for me :)
Mate you dont know norhing about power supply, you said 12v/3A for beelink and you see that has 12v/9mah , away far that 9mah to 3A is supply fault not pcb, replace power supply and all be fine!
Why you even opened it first place when you only had to clear bios
It was the first time i had this device on my hands and i said: let's tear it apart !