Thanks! I had dealings with these at a plant I worked at and had never had saw one before. Had me chasing my tail for awhile. Sure wish I had this information then. Thanks again!
apprentice here, firstly thanks for a fantastic video! do you have any idea how this exact circuit would be done using a 3 wire sensor? just brown blue and black being your +VE, -VE and signal wire.
Hello sir, This video must be very helpful for beginner, i have a concern about the input signals S12 and S22, in the instruction manual of the device they are always connecting the terminal S11 -> ESTOP/Light curtain -->S12, and S21 -> ESTOP/Light curtain ->S22. But i see here you have skipped the S11 and S21, so i would like to know in this case how about the signal from device (sensor) to the terminal S12 and S22 i mean the voltage (OVDC or 24VDC)?
Hi how are you? I need your help, I have a problem with the RSLogix 500 software. When I try to open the app this give me an error that says: Fatal error! The copy protection license for the application could not be acquired. Error: 2. Have you any idea of this error? Can you give a solution because I need to use the software? Thanks !!
Either you buy the license or if its kinda urgent and you need to use the software then change the date and year of your PC to 2-3 year back. don't update the time or use internet. the software shall work fine.
Thanks! I had dealings with these at a plant I worked at and had never had saw one before. Had me chasing my tail for awhile. Sure wish I had this information then. Thanks again!
These are quite complicated once more than one of these are involved. That being said, if you work through it step by step, it's not unsolvable.
Very helpful video. Thank you.
Thanks! Great video. Essentially!
You're welcome Saban!
Please do video on the old relay
apprentice here, firstly thanks for a fantastic video! do you have any idea how this exact circuit would be done using a 3 wire sensor? just brown blue and black being your +VE, -VE and signal wire.
Very good.muito bom, i'm from Brazil
Is there any tutorial explaining the TLS-GD2? specifically the TLS-3 GD2
Thanks 👍
Hello sir,
This video must be very helpful for beginner, i have a concern about the input signals S12 and S22, in the instruction manual of the device they are always connecting the terminal S11 -> ESTOP/Light curtain -->S12, and S21 -> ESTOP/Light curtain ->S22. But i see here you have skipped the S11 and S21, so i would like to know in this case how about the signal from device (sensor) to the terminal S12 and S22 i mean the voltage (OVDC or 24VDC)?
Is 24 the output that would go to a conveyor or an actuator
What's the difference between TLS1-GD2 and TLS2-GD2??
TLS1 is “power to release” and TLS2 is “power to lock”.
@@_DigitalCam thank you!!!
Hi how are you? I need your help, I have a problem with the RSLogix 500 software. When I try to open the app this give me an error that says:
Fatal error!
The copy protection license for the application could not be acquired. Error: 2.
Have you any idea of this error? Can you give a solution because I need to use the software?
Thanks !!
Either you buy the license or if its kinda urgent and you need to use the software then change the date and year of your PC to 2-3 year back. don't update the time or use internet. the software shall work fine.
+