ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
Excellent video! The only problem I see is in creating slopes and changing section or increasing depth.
nO DRAINAGE IN THE WORLD IS FLAT, GREAT METHOD BUT WHAT ABOUT INVERT LEVELS AND SLOPES????
Good day sir, how and where can I get the profile that you used in designing the drainage? 1:46
It’s really great how fast it’s done, however in an actual construction you a slope by inputing invert level height. Any idea how to do it?
define a beam profile. then you can slope it as well.
Great tutorial. Please where can I get the RVT file used in the video ?
Thanks, liked the idea but not useful for drainage modelling! A drainage without any slope doesnt exist.
You Can not give slope if you use this method, do you?
great tutorial can you please upload the r9 profile it's expired appreciated
one can consider using beam category to make such RFA. Since beam can handle slope
yea. you can slope the whole beam or only the drain floor if you want to.
Actually wait how to put IL and TL. 😩So not possible for this method?
Not possible to apply slope
Thank you
Sir what family type template using to create a trench cross/wye
Awesome!Is anyone here willing to share how to create that Tee or Cross fittings?
Hello! your drain tutorial is easy though I can't find any R9 profile for fitting anywhere in my 2019 revit families. Please can you attach the .rfa file or tell me where it is located in the families folder. Thank you.
Hi, you can download it from here, it's RVT file with all families that is required to do this kind of modeling www.rapidshare.com.cn/CpPzme7
@@BehzadMeskini You are a safe saver. Thank you very much!
Lifesaver I mean. autocorrect! I really appreciate it! have a wonderful day.
Can you please share again? link expired
@@BehzadMeskini Hi Behzad do you mind sharing the link again? as i cannot the above link, thank you so much
Just one question what category of the fittings are you used
Wall base family, and category wise is Generic Model
wetransfer.com/downloads/bca5ea3e8b4abf5f74f769d7b6d510e720210315055101/b5cae0fe9d3c56819c301d4ac047c35d20210315055129/03f561
yeah how do you slope?
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
grear
mind drop your link again, i cant open due to expired. thank you
Ok how did you create the r9 profile ?
hi, mind sharing family? thank you
Would you like to tell me where to get the cross family?
Awesome..
thank you for your sharing
I agree with you but what if it is not horizontal?
Hi Behzad do you mind sharing the link again? as i cannot the above link, thank you so much.
Could you share the family
Hi, do you have a video on how to create that Y and cross fitting?
Thank you very much
for your reference we.tl/t-1Q3syFTJsi
@@BehzadMeskini hi can share again the family?
hi can you share me the file?
To all fellows, it's not possible to apply slope/gradient to the slot , at least as I know.
بسیار عالی
Excellent video! The only problem I see is in creating slopes and changing section or increasing depth.
nO DRAINAGE IN THE WORLD IS FLAT, GREAT METHOD BUT WHAT ABOUT INVERT LEVELS AND SLOPES????
Good day sir, how and where can I get the profile that you used in designing the drainage? 1:46
It’s really great how fast it’s done, however in an actual construction you a slope by inputing invert level height. Any idea how to do it?
define a beam profile. then you can slope it as well.
Great tutorial. Please where can I get the RVT file used in the video ?
Thanks, liked the idea but not useful for drainage modelling! A drainage without any slope doesnt exist.
You Can not give slope if you use this method, do you?
great tutorial can you please upload the r9 profile it's expired appreciated
one can consider using beam category to make such RFA.
Since beam can handle slope
yea. you can slope the whole beam or only the drain floor if you want to.
Actually wait how to put IL and TL. 😩So not possible for this method?
Not possible to apply slope
Thank you
Sir what family type template using to create a trench cross/wye
Awesome!
Is anyone here willing to share how to create that Tee or Cross fittings?
Hello! your drain tutorial is easy though I can't find any R9 profile for fitting anywhere in my 2019 revit families. Please can you attach the .rfa file or tell me where it is located in the families folder. Thank you.
Hi, you can download it from here, it's RVT file with all families that is required to do this kind of modeling www.rapidshare.com.cn/CpPzme7
@@BehzadMeskini You are a safe saver. Thank you very much!
Lifesaver I mean. autocorrect! I really appreciate it! have a wonderful day.
Can you please share again? link expired
@@BehzadMeskini Hi Behzad do you mind sharing the link again? as i cannot the above link, thank you so much
Just one question what category of the fittings are you used
Wall base family, and category wise is Generic Model
wetransfer.com/downloads/bca5ea3e8b4abf5f74f769d7b6d510e720210315055101/b5cae0fe9d3c56819c301d4ac047c35d20210315055129/03f561
yeah how do you slope?
Awesome!
Is anyone here willing to share how to create that Tee or Cross fittings?
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
grear
mind drop your link again, i cant open due to expired. thank you
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
Ok how did you create the r9 profile ?
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
hi, mind sharing family? thank you
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
Would you like to tell me where to get the cross family?
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
Awesome..
thank you for your sharing
I agree with you but what if it is not horizontal?
Hi Behzad do you mind sharing the link again? as i cannot the above link, thank you so much.
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
Could you share the family
wetransfer.com/downloads/bca5ea3e8b4abf5f74f769d7b6d510e720210315055101/b5cae0fe9d3c56819c301d4ac047c35d20210315055129/03f561
Hi, do you have a video on how to create that Y and cross fitting?
www.mediafire.com/file/1v92867awuw8f6k/FITTING.rar/file
Would you like to tell me where to get the cross family?
Thank you very much
for your reference
we.tl/t-1Q3syFTJsi
@@BehzadMeskini hi can share again the family?
hi can you share me the file?
Would you like to tell me where to get the cross family?
wetransfer.com/downloads/bca5ea3e8b4abf5f74f769d7b6d510e720210315055101/b5cae0fe9d3c56819c301d4ac047c35d20210315055129/03f561
To all fellows, it's not possible to apply slope/gradient to the slot , at least as I know.
بسیار عالی