Was fixing my ak 105 gel blaster and then frustated as to why the gel wont came out so i decided to pit my hand infront of the outerbar to feel if there is any air pumping out. Worse idead ever i get hit by 300fps ultra hard gel. Ahh the pain it leaves a round mark in the palm of my hand.
I left water unnoticed in my mag for 2 weeks, now the motor is covered in rust. I wiped it all away, aswell as the water, but the mag still isn't working. Any tips?
Rust is probably stopping the motor from working. Spray some wd40 on it and see if you can turn the motor with your hand. This might make the motor work again. Then reassemble the mag and see if it works again.
Everytime I turn on my g36c gel blaster it shoots it self whithout me pulling the trigger the magazines are not ejectable bc the battery are in side the magazine and theres like a switch on it
Drill the screw out with a special drill bit and the drill in reverse (so it spins the way you would turn a screw driver to loosen it). Another way that might work is glue a small screw driver to the stripped screw. Let it set for 24 hours and try to unscrew it. Probably a drop of epoxy resin glue would do.
Does this magazine work for other m4 toys? My brother's m4 magazine just dont work well. The bullets are plastic pellets. And sad to say there are no magazines available for sale, with plastic bullets. I found one online, like this one, so i want to find out if this compatible with other guns
Was fixing my ak 105 gel blaster and then frustated as to why the gel wont came out so i decided to pit my hand infront of the outerbar to feel if there is any air pumping out. Worse idead ever i get hit by 300fps ultra hard gel. Ahh the pain it leaves a round mark in the palm of my hand.
Safety first bro, safety first 😂
thank you very much brother thanks thanks to you I repaired my magazine
How to remove the magazine.
Step 1: Remove the magazine
Me: 😐
Bro the screws are on too tight, we cannot get them off
Mine doesn't have screws.. help
I left water unnoticed in my mag for 2 weeks, now the motor is covered in rust. I wiped it all away, aswell as the water, but the mag still isn't working. Any tips?
Rust is probably stopping the motor from working. Spray some wd40 on it and see if you can turn the motor with your hand. This might make the motor work again. Then reassemble the mag and see if it works again.
@@outie555two alright thanks i'll try
It would have helped if my mag looked the same as yours in the inside I have 1 from temu
Goona shoot like a billionaire
Mine is not shooting i was fixing my magazine and sometimes it shoot sometimes is not i have M4A1 aswell
hello, did you fix it?
Why my jinming gen 8 is no gel bullet come out but may magazine is full 😭😭
I had that problem, hence the video. As the way I fixed it was by pulling the magazine apart and cleaning any old dried up gel balls out of it.
Do you know how to open an ACR mag? Looks like an AK type....
Not sure, sorry
Everytime I turn on my g36c gel blaster it shoots it self whithout me pulling the trigger the magazines are not ejectable bc the battery are in side the magazine and theres like a switch on it
how to get a magazine open if you have a striped screw on it
Drill the screw out with a special drill bit and the drill in reverse (so it spins the way you would turn a screw driver to loosen it). Another way that might work is glue a small screw driver to the stripped screw. Let it set for 24 hours and try to unscrew it. Probably a drop of epoxy resin glue would do.
Does this magazine work for other m4 toys? My brother's m4 magazine just dont work well. The bullets are plastic pellets. And sad to say there are no magazines available for sale, with plastic bullets.
I found one online, like this one, so i want to find out if this compatible with other guns
Hey mate both of my springs have come out and don’t know how to put the back in
Great video u saved me money and time thank u🤙
Thank you so much i did not know how to put it back together
I didn't know you had a gel blaster. Mods are fun.
Yeah they are a fun toy. Might do a spring mod but it's still ok with the standard spring for now
@@outie555two here's my gen 8 video a bit long but just take what you need.
th-cam.com/video/Gon_8ssVICo/w-d-xo.html
Where can I get another one if I can’t fix it ??
thanks so much for the vid helped alot with reassembling my mag
Mebbe drill some drainage holes in the base.
Oh great wizard, I thankyou for sharing your knowledge with us!
Shoot for the stars
Great video thanks. I was worried when I cracked mine open one of the springs came out as to how to put this back.
Had the samething happened to me and then I tried to Google it with no luck so I decided to make this video for others like you. thanks buddy.
Thanks sooooo much
No problem
Thanks so much
No problem
Damn just bought 8 mags only to find 4 of them didn’t work then I watched this video & “oh how my life is saved” 😍😍 cheers for the video brother 🤙🤙
What a relief!
Great video mate - saved me a lot of heartache with those fiddley little pieces.
Champion! Thank You 😎👍
Big help mate cheers
So helpful, thank you.
No worries mate
Could you do a video where you take apart a wells magazine?
Send me one and I will
@@outie555two do you go to donnybrook? Ill give you my spare if you come on a Saturday
Thanks a lot man took me a while but got it ❤
No problem 👍
Thank you so much bro🙏
U earn my like and subscribe