I don’t sharpen enough to warrant a more expensive solution, so this was helpful. Hand filing just hasn’t been enough to keep up with the rock dings, etc.
Thank you for taking the time to watch this. If you have any questions about our sharpeners, reach out to us at support@allamericansharpener.com We're happy to help out in any way we can!
Excellent videos from your company! Initial thought is that this is a company I can stand behind. Glad to see it is American made! Will be ordering a tool for myself!👍
Thanks, Andrew! We are grateful to have such a great base of current and future customers, and we always strive to live up to their highest expectations. Our production team and customer support are here for you for the life of your sharpener!
Now this is a great video - simple, informative, step-by-step instructions in response to customer questions, and without a long intro or loud music. I'm impressed by how flexible the design of the sharpener is given so many actual variables in blade and grinder size and shape. Thank you!
Thanks for the encouraging words! We have always preferred straight-forward, no nonsense communication. Glad you liked the video, and we appreciate that you took the time to leave a positive comment.
I can tell you, I talked to this man on the phone. Very patient, friendly, helpful and called back. They believe in old school workmanship and customer service. So rare these days. Thank You for all your help. My order was placed last night. I've done this by hand but it is a pain.
This tool is very well designed and very well built. I got this tool for Christmas and have already sharpened 4 sets of Honda blades & 2 sets of blades for a 48” Scag mower. I was even able to save a set of the Honda blades that were damaged by hitting a rock and I had given up on, the grinding by hand would have been very difficult to remove the damage to the edge of the blade but it was easy to remove the material and keep the proper angle with this blade sharpener. This is a great tool, glad to see it is made in the USA. Keep up the good work and two thumbs up for your attention to the quality. I am not impressed by much but this tool makes the cut and is very impressive!
Thank you, David, for taking the time to leave such a nice comment! We appreciate your business and support. And we hope your 5005 serves you well for many years!
I just bought the 5005 this week. What a great product. I have 9 acres of grass to mow. The cut I get with super sharp correctly angled blades is very noticeable. No more guessing if the angles are correct. After using it I realized what a bad job I had been doing before. Thanks
I sharpened saw blades for a living. Always got great results free hand and on a 1" belt sander with 50 grit belt. That machined look and razor sharp. Your machine makes it easy for your typical homeowner.
Great video! I just ordered one of these a few days ago. Had a few questions but figured how hard can it be. Saw this video this morning and it answered all my questions. Now I'm excited about receiving the sharpening jig. Great job!
Just used your 5000. Amazing time saver. I needed to take out nicks from user exuberance. I work with a Church and service their equipment. Your suggestion of angling the edger is next. Amazing jig.
Thanks for the compliment! We're happy that you're pleased with your sharpener, and took the time to let us know. Wishing you many years of great service from your All American Sharpener!
Wishing you consistently sharp blades for many years to come! Reach out to support@allamericansharpener.com if you need any assistance as you're getting going.
@@AllAmericanSharpener You'd be amazed at the amount of stuff that's for sale out there that hasn't had a lot of thought put into it, very frustrating for the end user. 1 example off the top of my head is when you buy a really expensive exhaust system for your motorcycle and the don't put a set of header gaskets in the kit, they are probably less than a dollar a piece wholesale.
Bought a 5005 and set it up. Mounting on my work bench it with threaded inserts. The American made quality and design is impressive. Could've saved some money by buying a chi-com knock off but they already get plenty of our business!
I'm so glad I found this. I bought the 5005 and was planning on using it on multiple blades. I put on blade from an ego mower and it didn't fit. Thanks for this video and a great product.
The EGO blade will fit, with a simple adjustment. The left side vise plate is designed to be rotated to accommodate smaller, more narrow blades. I will leave a link below to a video showing that process. th-cam.com/video/UvbJKlxE0Ng/w-d-xo.html (should start around the 5:33 mark)
I just purchased the 5005 model and I love it. My question is this; I noticed most of my blade angles are closer to 45 degree, should I try to dial it back closer to 30 degree or is 45 ok?
If you are matching your grinding angle to a factory bevel, and 45 degrees is working, you're good to stick with that. Blades on most John Deere's, for instance, require 45 degrees due to the shape of the blade. As you move toward the cutting edge from the center mounting area, there is often a tilt or twist that affects the necessary setting on the jig. The video link I've included may help when determining the correct angle for each of your blades. th-cam.com/video/YQd8xbZgkq0/w-d-xo.html
We would recommend it. Not because it's an upsell, but because we know you won't have regrets. Sometimes, when customers choose one of the other two units, they wish they had the ability to easily adjust to angles beyond 30 degrees. The 5005 Gen 2 is the only model that can easily do that. When looking at photos of your blades online, I think they may work with 30 degrees. But if they do need 35 degrees, or if you decide to switch to a different style blade in the future, you will be covered with angles on the 5005. Thanks for your interest! If you have more questions, or want to go into more detail, feel free to email our support team at: support@allamericansharpener.com
I just ordered the "deluxe" (5005 with the Honda adapter). Please say (in-your opinion) which grinder I'll need / or you recommend and the DISC type / size for same ... (a Dewalt, a Harbor Freight, P. Cable) or a "no-name" even ... PLUS (again), what grinder DISC. Thanks / LOVED this clip / it SOLD ME.
Thank you for your business and compliment on the video! We don't have any strong grinder recommendations, as almost any 4.5 inch angle grinder will do the job. We have customers using very inexpensive grinders from Harbor Freight and others using expensive brand name cordless grinders. And they all get good results. It doesn't require a high rpm grinder. With that being said. We've been using a corded DeWalt (DWE4011) and a couple cordless Ryobi grinders. Find one that fits your budget and feature preferences. Think about how the power switch/trigger works and what would be most comfortable for you. For a disc, a 36 or 40 grit flap wheel is a good way to go. T29 (conical) or T27 (flat type) will both work fine. If you have a choice, go with the T29. Brand name discs tend to last longer (like DeWalt, Diablo, Milwaukee, etc …).
@@AllAmericanSharpener - I'm looking at picking up a flap disc for my angle grinder to pair with my upcoming purchase of your Gen 2 model #5005. Can you expound a bit more on why the T-29 (conical) type flap discs are recommended over the T-27 (flat) type? I've read that the T-29 may give more of a convex grind than the typical "hollow" or concave grind of the T-27, which may be less desirable overall.
@@Devin_Schwartz - The main reason we suggest a T29 over a T27 is because the approach angle is matched a little better with the T29 as you start to grind your blade in our jig. But there is very little difference in the grind you will see with either type. Both types of flap discs will give very similar results in this situation. Because of the "cushioning" effect of the flap discs, you will probably see a more convex grind with both types. If you prefer or seek a more concave grind, you may need to choose a hard disc. But a hard disc is much less forgiving and can gouge over overheat the metal more easily. The link below is for a section of video (starting around the 6 min 25 sec mark) where Todd talks about this in a little more detail. This may be more informative as well. Thank you for your interest! th-cam.com/video/UvbJKlxE0Ng/w-d-xo.html
Hi David. Both types will work equally as well. But if there is a choice, we probably favor the T29 discs slightly, because they match the approach angle of the grind a little better.
We're excited for your Model 5005 to get to you, too! It will go out with UPS this afternoon, and you will likely have it before the week is out. Let us know if you need any help as you're getting set up. Wishing you many years of great service from your Model 5005!
Thanks Paul. Getting our product to other countries has been challenging, for sure. We hope to eventually stock units closer to you, so shipping costs won't be so high.
@@AllAmericanSharpener I would have definitely bought one at the right price 100% and everyone over here I have shown it too loves it . It’s a pity you guys over the pond get the best products to use . I’m looking to buy a hustler stand on too and it’s so much more expensive over here . The market is so big over in the Uk if the price didn’t go up so much . But keep up the great work 👍🏻
No, you should only grind on the top beveled side of the blade. We usually use a wire cup attachment to clean grass and debris from the back side. Grinding on the back could compromise the sturdiness of blade, and doesn't contribute to getting a sharper edge.
I just received our sharpener. I have watched a few of your videos and still have a question about adjustment. We work with John Deere equipment and the blades we use have a cutting edge that is below the mounting plane. How do I adjust the sharpener to get my edge right? Next question, is how does one determine when a blade must be replaced?
Hi James. It sounds like you are referring to a counterclockwise blade. You can grind on the edge down below for a blade like that. The angle settings should remain the same. But it will be a mirror action from when you grind above the vise mount. Here is a link to an older video where Todd demonstrates this action (starting around the 1 min mark). In the video, he is showing an older "EXT" model. But the "EXT" version is no longer needed or available. The new Gen 2 models that we currently produce have the extra arm length built in. th-cam.com/video/RxLYASrwiCw/w-d-xo.html I'm not sure if we are qualified to say when a blade should be replaced. We'd be more comfortable if you asked the blade manufacturer that question. But if the blade edge is worn far enough back that it's affecting the integrity of the blade, we would replace it. If you have more questions, feel free to follow up with our support department by emailing: support@allamericansharpener.com
This seems to happen with softer metal blades. You can either clean it up with a file, or lightly touch it up with the grinder by hand. Using a finer grit grinding disk may help as well.
@@jackfoster8319 The burnish will depend mostly on the type if grinding disc used and the blade metal. The EXT models are specifically made to handle counterclockwise spinning mower blades. But any of our jigs should make it possible to get a good clean finish on the grind.
ah one more thing, blade balancer's. Seen a few comments on the MagnaMatic 1000 so went to Amazon, 200 bucks, thats insane, has to be one out there that works for way less money
We have been asked many times if we have a balancer for sale, and we do not yet. But it is definitely on our list our new products we would like to develop!
Hey man, pro lawn service SE Texas, Dixie Chopper. I sharpen all mine and my friends blades, and I have been asked 1000 times, how do you know when your blades are done, not worth sharpening anymore. I go by the meat on the backside, be a good idea to do a vid on this...Roost
seems that your invention could be modified by a user to sharpen a machete, scissors, and other kinds of straight edge cutting tools. great video i think i will purchse.
Thanks Bill. We have some pretty smart customers who have made adjustments or modifications to sharpen other types of blades. We can only recommend that our jig be used on mower blades, but if you are happy, we are happy. Thanks for watching and for the compliment!
Practice on an old blade and learn to adjust it. This guy has too much class to say it but many repair shops will grind off too much just to sell you a new set much sooner than if you take off 1/16" at the time like you can do with this thing. Do the math. Blades are expensive. This is not a cheap tool but do the math versus buying new blades. This tool wins hands down.
You need a better balancer. Cone is no better than nail in the wall. Manga Magic 1000 way to go. I tried both ways. Blades that were perfect on my nail were way off when mounted on the MagnaMatic. This will take out the bearings in your deck spindles. New spindles are $100 ea for our Graveleys. Don’t ask how I know that.
when doing this as a Pro, I had a sealed needle bearing for my 3/4 shaft blades. Still have it my my blade steed. Churches have many shaft configurations. I gave up and finally used a cone.
Yes, you are correct. This video was made before the Model 5005 existsted. So, at that time, there was no way to adjust beyond 30 degrees with the models that we were making then.
You temporarily confused me with the words "heavier angle". Any angle less than 30 degrees will have a longer slope. Any angle greater than that (31-90) will be steeper and have a shorter slope.
Our sharpeners were designed specifically for lawn mower blades, and require about 2 inches of flat metal to mount in the vise (with no blade edge), and a blade that runs straight from the mounting point. Since most knives and swords tend to curve toward the tip (and lack the flat area for mounting), our units are typically not applicable to those types of blades.
Have to ask since I bought it and ruined blade number one, first this is my idea so if it’s engineered in the future I want that credit but any way why is there to way to keep the grinder locked in place by drilling holes through the end of the pins? Yeah I’m aware people may need to adjust however if you made it a slider pin lock it would be perfect and could charge and extra 35 bucks for the jig bc it would ruin some idiots first blade haha…..only one side of the blade was wrong I figured it out but I’m going to drill through mine and put a pin through it
You aren't the first customer to raise the same question. While the rightward pressure on the angle grinder in the guide arm requires a bit of "muscle memory", we didn't feel the extra cost to create a locking system would balance out the benefits to the majority of our customers. We wanted (and continue to want) to provide the highest quality tool at the most affordable price. We're happy you've found a simple solution that will work out for you. We're grateful for your feedback, and for your business.
Well after another week tried it on another set of blades and it just takes too much off, so either these Walker blades were never and aren’t 30 degrees or I just cannot get the grinder to do the cutting edge always starts it’s own bevel no matter where I have it set. Hopefully they have a return policy because it’s ruined two sets now
@@ceciltuttle743 Our experience and customer feedback on Walker blades is that the 35 degree setting is a good match for the factory bevel. I think the best way to suss out the issue you're having with angle would be a phone call to us. We're happy to work to resolve this, and are available M-F 8am-4:30 at 419-823-7787.
TO ANYONE REASING THIS THREAD: I had a nice conversation with them over the phone and discussed I didn’t like that I had to basically make my own new bevel on my walker blades. Now I know “you should let do that”, but if you know how to grind and balance metal it’s quite ok especially if those blades are 7-8 years old. That being said I decided to put those newly beveled Walker blades out and mow with them today and it gave a better cut than I’ve ever seen on a Walker, and I say that with an eye popping WOW that’s amazing. Also came back already took them off and they weren’t razor sharp because of the early morning wetness on a few lawns and then cutting ten more, I did 3 passes sharp as a razor again. So to those Walker guys that have issues like me where you want it at 30 I don’t see why you wouldn’t is all I’m saying unless a Walker rep can explain to me how it could hurt or put extra stressed on my gearboxes or engine with less metal provided they are balanced.
@@goodboyringo9716 sharpen friends and neighbors blades for a reasonable price and ultimately have them pay for it. That’s what I did. Now, I have a side hobby and get paid for it.
Americans have been spoiled by cheap Chinese crap copies that look like the originals but fall short. I prefer to buy once/cry once about the price and have a tool that works.
Just grind you lawnmower blade by hand with a bench grinder, angle grinder or whatever. I desirable way to finish is by using a file with the blade held in a vise. You can learn to grind by hand with a little practice.
I don’t sharpen enough to warrant a more expensive solution, so this was helpful. Hand filing just hasn’t been enough to keep up with the rock dings, etc.
Thank you for taking the time to watch this. If you have any questions about our sharpeners, reach out to us at support@allamericansharpener.com We're happy to help out in any way we can!
Excellent videos from your company!
Initial thought is that this is a company I can stand behind.
Glad to see it is American made!
Will be ordering a tool for myself!👍
Thanks, Andrew! We are grateful to have such a great base of current and future customers, and we always strive to live up to their highest expectations. Our production team and customer support are here for you for the life of your sharpener!
Now this is a great video - simple, informative, step-by-step instructions in response to customer questions, and without a long intro or loud music. I'm impressed by how flexible the design of the sharpener is given so many actual variables in blade and grinder size and shape. Thank you!
Thanks for the encouraging words! We have always preferred straight-forward, no nonsense communication. Glad you liked the video, and we appreciate that you took the time to leave a positive comment.
I can tell you, I talked to this man on the phone. Very patient, friendly, helpful and called back. They believe in old school workmanship and customer service. So rare these days. Thank You for all your help. My order was placed last night. I've done this by hand but it is a pain.
Thanks, Tom! We appreciate your business, and your kind words.
Real name is Neil H. Tom Boyd is my TH-cam name. Just for clarification.
@@lights80088 Ah, got it. Thanks for the clarification, Neil. And thanks for the support!
I've been leaning toward your product. The quality of this video in explaining a lot of nuances that will come up has sold me! Ordering today.
Thanks, Reid! We appreciate your business and comment. If you have any questions after getting set up, feel free to check in with us.
This tool is very well designed and very well built. I got this tool for Christmas and have already sharpened 4 sets of Honda blades & 2 sets of blades for a 48” Scag mower. I was even able to save a set of the Honda blades that were damaged by hitting a rock and I had given up on, the grinding by hand would have been very difficult to remove the damage to the edge of the blade but it was easy to remove the material and keep the proper angle with this blade sharpener. This is a great tool, glad to see it is made in the USA. Keep up the good work and two thumbs up for your attention to the quality. I am not impressed by much but this tool makes the cut and is very impressive!
Thank you, David, for taking the time to leave such a nice comment! We appreciate your business and support. And we hope your 5005 serves you well for many years!
My son just purchased it thanks
I just bought the 5005 this week. What a great product. I have 9 acres of grass to mow. The cut I get with super sharp correctly angled blades is very noticeable. No more guessing if the angles are correct. After using it I realized what a bad job I had been doing before. Thanks
You're welcome. Thank you for your business and kind words! We appreciate your support.
I sharpened saw blades for a living. Always got great results free hand and on a 1" belt sander with 50 grit belt. That machined look and razor sharp. Your machine makes it easy for your typical homeowner.
Thank you! We appreciate your comment.
Many professional landscapers have decided it's a great tool for use in the field as well. Thanks for watching!
Great video! I just ordered one of these a few days ago. Had a few questions but figured how hard can it be. Saw this video this morning and it answered all my questions. Now I'm excited about receiving the sharpening jig. Great job!
Thank you! We're glad the video helped. We appreciate your business and support!
Just used your 5000. Amazing time saver. I needed to take out nicks from user exuberance. I work with a Church and service their equipment. Your suggestion of angling the edger is next. Amazing jig.
Thanks, Jack. Glad to hear you are happy with your 5000!
I just wanted to say that the flat countersunk head socket cap screws to hold the blade is such a great design idea . Great design! I love mine!
Thanks for the compliment! We're happy that you're pleased with your sharpener, and took the time to let us know. Wishing you many years of great service from your All American Sharpener!
Just got mine, can't wait to get to sharpening those blades.
Wishing you consistently sharp blades for many years to come! Reach out to support@allamericansharpener.com if you need any assistance as you're getting going.
You seem to have thought of every angle, no pun intended. Very good video.
Thank you! We appreciate your interest and support.
@@AllAmericanSharpener You'd be amazed at the amount of stuff that's for sale out there that hasn't had a lot of thought put into it, very frustrating for the end user. 1 example off the top of my head is when you buy a really expensive exhaust system for your motorcycle and the don't put a set of header gaskets in the kit, they are probably less than a dollar a piece wholesale.
Outstanding vid. It’s easy to understand and the recording positions are at an adequate level to support the demo. Thank you for sharing.
Thank you for the compliment! Making videos can sometimes be a bit intimidating, so we appreciate your encouraging comment.
Bought a 5005 and set it up. Mounting on my work bench it with threaded inserts. The American made quality and design is impressive. Could've saved some money by buying a chi-com knock off but they already get plenty of our business!
We really appreciate your business and your support! Wishing you many years of great service from your 5005.
I'm so glad I found this. I bought the 5005 and was planning on using it on multiple blades. I put on blade from an ego mower and it didn't fit. Thanks for this video and a great product.
The EGO blade will fit, with a simple adjustment. The left side vise plate is designed to be rotated to accommodate smaller, more narrow blades. I will leave a link below to a video showing that process.
th-cam.com/video/UvbJKlxE0Ng/w-d-xo.html (should start around the 5:33 mark)
"These screws are set at the factory to be at the same hythe" lol. Just teasing. Excellent video. I'm gonna buy one of these 👍
Thank you!
I just purchased the 5005 model and I love it. My question is this; I noticed most of my blade angles are closer to 45 degree, should I try to dial it back closer to 30 degree or is 45 ok?
If you are matching your grinding angle to a factory bevel, and 45 degrees is working, you're good to stick with that. Blades on most John Deere's, for instance, require 45 degrees due to the shape of the blade. As you move toward the cutting edge from the center mounting area, there is often a tilt or twist that affects the necessary setting on the jig. The video link I've included may help when determining the correct angle for each of your blades.
th-cam.com/video/YQd8xbZgkq0/w-d-xo.html
I bought a 5005 model a few years ago, I love it
Thanks Bryan! That is good to hear. We Appreciate your support and hope that your 5005 is a tool that serves you well for many years.
I'll only have one style and size mower blade for my Simplicity Broadmore. Would it pay me to buy the adjustable model sharpener?
We would recommend it. Not because it's an upsell, but because we know you won't have regrets. Sometimes, when customers choose one of the other two units, they wish they had the ability to easily adjust to angles beyond 30 degrees. The 5005 Gen 2 is the only model that can easily do that. When looking at photos of your blades online, I think they may work with 30 degrees. But if they do need 35 degrees, or if you decide to switch to a different style blade in the future, you will be covered with angles on the 5005.
Thanks for your interest! If you have more questions, or want to go into more detail, feel free to email our support team at:
support@allamericansharpener.com
Got mine Friday. Works great. Thanks
Glad to hear that! Thank you!
Great job of explaining! Thx
Thank you!
Very helpful tips. Thanks!
You're very welcome, Dean!
I just ordered the "deluxe" (5005 with the Honda adapter). Please say (in-your opinion) which grinder I'll need / or you recommend and the DISC type / size for same ... (a Dewalt, a Harbor Freight, P. Cable) or a "no-name" even ... PLUS (again), what grinder DISC.
Thanks / LOVED this clip / it SOLD ME.
Thank you for your business and compliment on the video! We don't have any strong grinder recommendations, as almost any 4.5 inch angle grinder will do the job. We have customers using very inexpensive grinders from Harbor Freight and others using expensive brand name cordless grinders. And they all get good results. It doesn't require a high rpm grinder. With that being said. We've been using a corded DeWalt (DWE4011) and a couple cordless Ryobi grinders. Find one that fits your budget and feature preferences. Think about how the power switch/trigger works and what would be most comfortable for you. For a disc, a 36 or 40 grit flap wheel is a good way to go. T29 (conical) or T27 (flat type) will both work fine. If you have a choice, go with the T29. Brand name discs tend to last longer (like DeWalt, Diablo, Milwaukee, etc …).
@@AllAmericanSharpener GOT-IT !!
@@AllAmericanSharpener - I'm looking at picking up a flap disc for my angle grinder to pair with my upcoming purchase of your Gen 2 model #5005. Can you expound a bit more on why the T-29 (conical) type flap discs are recommended over the T-27 (flat) type? I've read that the T-29 may give more of a convex grind than the typical "hollow" or concave grind of the T-27, which may be less desirable overall.
@@Devin_Schwartz - The main reason we suggest a T29 over a T27 is because the approach angle is matched a little better with the T29 as you start to grind your blade in our jig. But there is very little difference in the grind you will see with either type. Both types of flap discs will give very similar results in this situation. Because of the "cushioning" effect of the flap discs, you will probably see a more convex grind with both types. If you prefer or seek a more concave grind, you may need to choose a hard disc. But a hard disc is much less forgiving and can gouge over overheat the metal more easily. The link below is for a section of video (starting around the 6 min 25 sec mark) where Todd talks about this in a little more detail. This may be more informative as well. Thank you for your interest!
th-cam.com/video/UvbJKlxE0Ng/w-d-xo.html
Concerning the flap grinding disc, do you prefer a type 27 or type 29?
Hi David. Both types will work equally as well. But if there is a choice, we probably favor the T29 discs slightly, because they match the approach angle of the grind a little better.
Worth the cost. You get precision results without the need for professional sharpening services. JMO
Thank you for your comment, and your support!
Great Tool
Thank you! Nothing makes us happier than satisfied customers!
Good job explaining everything
Can not wait to get mine in.
We're excited for your Model 5005 to get to you, too! It will go out with UPS this afternoon, and you will likely have it before the week is out. Let us know if you need any help as you're getting set up. Wishing you many years of great service from your Model 5005!
@@AllAmericanSharpener thank you!
Great video
in 1072, I was part timing landscaper. On every Monday, we would drop blades and clean decks. files were used to clean blades.
I would love one of these but the cost to the Uk on Amazon is silly . Absolutely a superb idea and well manufactured though 👌🏻
Thanks Paul. Getting our product to other countries has been challenging, for sure. We hope to eventually stock units closer to you, so shipping costs won't be so high.
@@AllAmericanSharpener
I would have definitely bought one at the right price 100% and everyone over here I have shown it too loves it .
It’s a pity you guys over the pond get the best products to use .
I’m looking to buy a hustler stand on too and it’s so much more expensive over here . The market is so big over in the Uk if the price didn’t go up so much .
But keep up the great work 👍🏻
Thank you!
Cool tips.
this another piece of Equipment I'll make sure my son will inherit
Are you supposed to touch up the back side of the blades?
No, you should only grind on the top beveled side of the blade. We usually use a wire cup attachment to clean grass and debris from the back side. Grinding on the back could compromise the sturdiness of blade, and doesn't contribute to getting a sharper edge.
Thanks for the information
You're welcome.
I just received our sharpener. I have watched a few of your videos and still have a question about adjustment. We work with John Deere equipment and the blades we use have a cutting edge that is below the mounting plane. How do I adjust the sharpener to get my edge right? Next question, is how does one determine when a blade must be replaced?
Hi James. It sounds like you are referring to a counterclockwise blade. You can grind on the edge down below for a blade like that. The angle settings should remain the same. But it will be a mirror action from when you grind above the vise mount. Here is a link to an older video where Todd demonstrates this action (starting around the 1 min mark). In the video, he is showing an older "EXT" model. But the "EXT" version is no longer needed or available. The new Gen 2 models that we currently produce have the extra arm length built in.
th-cam.com/video/RxLYASrwiCw/w-d-xo.html
I'm not sure if we are qualified to say when a blade should be replaced. We'd be more comfortable if you asked the blade manufacturer that question. But if the blade edge is worn far enough back that it's affecting the integrity of the blade, we would replace it.
If you have more questions, feel free to follow up with our support department by emailing:
support@allamericansharpener.com
@@AllAmericanSharpener Thank you.
@@jamesvertrees5857 You're welcome. Thank you!
i bought one last year..quality build...great idea...it will last longer than me lol..
Thanks!
Afyer i grinded my blades i noticed a slight burr on the edges. How do i stop this its not good for the grass obviously. Lol appreciate it
This seems to happen with softer metal blades. You can either clean it up with a file, or lightly touch it up with the grinder by hand. Using a finer grit grinding disk may help as well.
@@AllAmericanSharpener If I undrstand , the ext will easily provide the flat burnish
@@jackfoster8319 The burnish will depend mostly on the type if grinding disc used and the blade metal. The EXT models are specifically made to handle counterclockwise spinning mower blades. But any of our jigs should make it possible to get a good clean finish on the grind.
LamBeau Leeper Get it a coat!
Sorry...... 😊. I just couldn’t resist. Maybe I’ve had one too many Mountain Dews.... 😊
ah one more thing, blade balancer's. Seen a few comments on the MagnaMatic 1000 so went to Amazon, 200 bucks, thats insane, has to be one out there that works for way less money
We have been asked many times if we have a balancer for sale, and we do not yet. But it is definitely on our list our new products we would like to develop!
Hey man, pro lawn service SE Texas, Dixie Chopper. I sharpen all mine and my friends blades, and I have been asked 1000 times, how do you know when your blades are done, not worth sharpening anymore. I go by the meat on the backside, be a good idea to do a vid on this...Roost
Thanks for the suggestion! We will add that to our list of videos to do.
seems that your invention could be modified by a user to sharpen a machete, scissors, and other kinds of straight edge cutting tools. great video i think i will purchse.
Thanks Bill. We have some pretty smart customers who have made adjustments or modifications to sharpen other types of blades. We can only recommend that our jig be used on mower blades, but if you are happy, we are happy. Thanks for watching and for the compliment!
I use mine all the time!
That's great, Jim! Wishing you many seasons of sharp blades, and great service from your Model 5005!
Practice on an old blade and learn to adjust it. This guy has too much class to say it but many repair shops will grind off too much just to sell you a new set much sooner than if you take off 1/16" at the time like you can do with this thing. Do the math. Blades are expensive. This is not a cheap tool but do the math versus buying new blades. This tool wins hands down.
Thanks for the support!
You need a better balancer. Cone is no better than nail in the wall. Manga Magic 1000 way to go. I tried both ways. Blades that were perfect on my nail were way off when mounted on the MagnaMatic. This will take out the bearings in your deck spindles. New spindles are $100 ea for our Graveleys. Don’t ask how I know that.
when doing this as a Pro, I had a sealed needle bearing for my 3/4 shaft blades. Still have it my my blade steed. Churches have many shaft configurations. I gave up and finally used a cone.
Commercial equipment work at High blade speed. Balanced and sharp works better.
I went looking on Google. I think you mean Stens Magna Matic 1000. 👍
Can’t you just set the angle to 40°? Instead if shims??? Seems like you are shimming it to an already available setting.
Yes, you are correct. This video was made before the Model 5005 existsted. So, at that time, there was no way to adjust beyond 30 degrees with the models that we were making then.
That must be what I have JD mulching blades
Why don't you just grind at 40 degrees instead of the shims.
This video was created before the Model 5005 existed. So there was no option to go to 40 degrees. Thank you for watching!
You temporarily confused me with the words "heavier angle". Any angle less than 30 degrees will have a longer slope. Any angle greater than that (31-90) will be steeper and have a shorter slope.
Can i sharpen knives and swords with this? lol.
Our sharpeners were designed specifically for lawn mower blades, and require about 2 inches of flat metal to mount in the vise (with no blade edge), and a blade that runs straight from the mounting point. Since most knives and swords tend to curve toward the tip (and lack the flat area for mounting), our units are typically not applicable to those types of blades.
Have to ask since I bought it and ruined blade number one, first this is my idea so if it’s engineered in the future I want that credit but any way why is there to way to keep the grinder locked in place by drilling holes through the end of the pins? Yeah I’m aware people may need to adjust however if you made it a slider pin lock it would be perfect and could charge and extra 35 bucks for the jig bc it would ruin some idiots first blade haha…..only one side of the blade was wrong I figured it out but I’m going to drill through mine and put a pin through it
You aren't the first customer to raise the same question. While the rightward pressure on the angle grinder in the guide arm requires a bit of "muscle memory", we didn't feel the extra cost to create a locking system would balance out the benefits to the majority of our customers. We wanted (and continue to want) to provide the highest quality tool at the most affordable price. We're happy you've found a simple solution that will work out for you. We're grateful for your feedback, and for your business.
Well after another week tried it on another set of blades and it just takes too much off, so either these Walker blades were never and aren’t 30 degrees or I just cannot get the grinder to do the cutting edge always starts it’s own bevel no matter where I have it set. Hopefully they have a return policy because it’s ruined two sets now
@@ceciltuttle743 Our experience and customer feedback on Walker blades is that the 35 degree setting is a good match for the factory bevel. I think the best way to suss out the issue you're having with angle would be a phone call to us. We're happy to work to resolve this, and are available M-F 8am-4:30 at 419-823-7787.
TO ANYONE REASING THIS THREAD:
I had a nice conversation with them over the phone and discussed I didn’t like that I had to basically make my own new bevel on my walker blades. Now I know “you should let do that”, but if you know how to grind and balance metal it’s quite ok especially if those blades are 7-8 years old. That being said I decided to put those newly beveled Walker blades out and mow with them today and it gave a better cut than I’ve ever seen on a Walker, and I say that with an eye popping WOW that’s amazing. Also came back already took them off and they weren’t razor sharp because of the early morning wetness on a few lawns and then cutting ten more, I did 3 passes sharp as a razor again. So to those Walker guys that have issues like me where you want it at 30 I don’t see why you wouldn’t is all I’m saying unless a Walker rep can explain to me how it could hurt or put extra stressed on my gearboxes or engine with less metal provided they are balanced.
200.00 for the tool is to much
This is likely geared for professional lawn care companies, who should be using the best quality blades for their customers.
@@elitelawncare4655 .... Thats your take on it , it could be for anyone wanting to sharpen their blades, the title does say ALL AMERICAN SHARPENER
@@goodboyringo9716 sharpen friends and neighbors blades for a reasonable price and ultimately have them pay for it. That’s what I did. Now, I have a side hobby and get paid for it.
Americans have been spoiled by cheap Chinese crap copies that look like the originals but fall short. I prefer to buy once/cry once about the price and have a tool that works.
Just grind you lawnmower blade by hand with a bench grinder, angle grinder or whatever. I desirable way to finish is by using a file with the blade held in a vise.
You can learn to grind by hand with a little practice.
yeah sure!! and screw the thing up beyond repair!!!! lol!!!!