Congratulations on everything that you and the guys accomplished in this last year brother. Keep up the great work and videos. This was my first full year of following you along brother. I don’t comment much but I figured this was such a great encouraging and positive video that I just had to. Looking forwforward to what you have in store in this new year. Happy new year to everyone. God bless and I’m staying tuned brother ✌🏻😎
A big Thank you for all you do, inspiring and great explanation. Video quality was already great but can’t wait to see what you do in the next setup. Wishing great success in 2024
I really appreciate you taking your time to make these videos. I just finished seeing your oil change video on the Mazda. I just acquired 1989 one owner b 2200 and I needed to know how to do a oil change on that specific truck I never dealt with the catch can
I have a Mazda B1600. I suffer from a problem with the third cylinder of the engine not working sometimes but not at other times, thus burning the candle, burning its wire, and causing an increase in the oil level, as well as not accelerating normally on the road, as the car is without torque and speed. What to do?
‘87 Mazda B2600 here. Just started the Weber changeover. Do I need to keep the Oxygen sensor? I know it’s probably a dumb question but it always sounds better from a recognized expert!
I have a question about the swap of window regulators from manual to electric using 94 to 97 Accord regulators. Are those 2 door or 4 door regulators? Will that still work for 89 2600 4x4 cab plus also?
I’ve been looking into putting a turbo on my b2000 do you have any tips I found a kit with everything for it I just don’t know how I would go about tuning it seeing how it’s carbureted and just thought you be the best person to ask thank you!!
I don't really know exactly. I feel like it will need to run richer than normal. There is a turbo write up on my website that I saved from the old forums. It may be under engine docs. mazdaminitruckin.com
I have a Mazda b2600i 2WD and my starter is going bad I wanna change the part but cant locate it 😭 anyone know and can help me out idk if it’s right in front of me and I’m missing it or what
Happy 2024 to you Mazda Mitch!❤ Immensely enjoy your videos!
Happy new year!
Congratulations on everything that you and the guys accomplished in this last year brother. Keep up the great work and videos. This was my first full year of following you along brother. I don’t comment much but I figured this was such a great encouraging and positive video that I just had to. Looking forwforward to what you have in store in this new year. Happy new year to everyone. God bless and I’m staying tuned brother ✌🏻😎
Thanks for the update and passed vids ive learned some stuff as a fellow mazda guy . I need some Mazda gear from you before mininats 😂
A big Thank you for all you do, inspiring and great explanation. Video quality was already great but can’t wait to see what you do in the next setup. Wishing great success in 2024
Thanks so much!
MITCH, Your videos has helped me so much with my 1991 Madza B2200. THANK YOU!!! KEEP THEM COMING!!
Congrats on the shop and thank you for the helpful videos and help on your Facebook page
Awesome video!!!! 2024 bring it on!!!
Hell yeah brother!
Happy New Year Mich
I really appreciate you taking your time to make these videos. I just finished seeing your oil change video on the Mazda. I just acquired 1989 one owner b 2200 and I needed to know how to do a oil change on that specific truck I never dealt with the catch can
Thank you so much!!!! You are invaluable.
Mitch, put a heater core in my b2600 and its leaking from the check valve. Cant seem to find one at all. Do you have any help or ideas on what to do?
I have a Mazda B1600. I suffer from a problem with the third cylinder of the engine not working sometimes but not at other times, thus burning the candle, burning its wire, and causing an increase in the oil level, as well as not accelerating normally on the road, as the car is without torque and speed. What to do?
‘87 Mazda B2600 here. Just started the Weber changeover. Do I need to keep the Oxygen sensor? I know it’s probably a dumb question but it always sounds better from a recognized expert!
No you can remove it because there's no need for it and there's no need for the computer anymore when you go to a Weber carburetor
Thank you
I have a question about the swap of window regulators from manual to electric using 94 to 97 Accord regulators. Are those 2 door or 4 door regulators? Will that still work for 89 2600 4x4 cab plus also?
You can only use the front doors as the rear doors are way too short and yes 86 through 93 Mazdas it works on all of them just follow my videos
I’ve been looking into putting a turbo on my b2000 do you have any tips I found a kit with everything for it I just don’t know how I would go about tuning it seeing how it’s carbureted and just thought you be the best person to ask thank you!!
I don't really know exactly. I feel like it will need to run richer than normal. There is a turbo write up on my website that I saved from the old forums. It may be under engine docs. mazdaminitruckin.com
I need help on how to get my brand new clutch to function it won’t engage with gears after I installed a new clutch set
Did you put the clutch plate in backwards? It's a possibility.
@@MazdaMitch I mean I put the clutch plate the way it says towards flywheel has some letterings
It’s a 1989 Mazda b2200 2.2 truck
Maybe your clutch fork slipped off during installation, and it's not pushing the throughout bearing against the clutch.
@@MazdaMitch I will definitely take the transmission off tomorrow and reinstall it back to see if it can finally engage when I shift with truck on
I have a Mazda b2600i 2WD and my starter is going bad I wanna change the part but cant locate it 😭 anyone know and can help me out idk if it’s right in front of me and I’m missing it or what
Have you looked on rockauto.com?
I’m sorry I meant like find it on the truck 😂 I looked underneath and was looking around under the hood but couldn’t locate it