Here’s How I Make Custom Trading Cards With Cut Autographs! | My RED AUERBACH Project
ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2022
- I got a lot of good feedback from the first custom card video. I decided I wanted a Red Auerbach signed card and took matters into my own hands! I hope some of you that are real creative can take this method and move on to bigger and better projects!
Here's a link for the blank template I edit in Paint 3D: ibb.co/9Td0f5T
Comparable paper trimmer on Amazon (affiliate link): amzn.to/3ZDmjyP
Elmer's Spray Adhesive on Amazon (affiliate link): amzn.to/3PDfxVj
Bird small rectangle craft punch on Amazon (affiliate link): amzn.to/3PXazUR
Check out new episodes of the Wax Museum Podcast every Thursday: waxmuseum.podbean.com/
If you enjoy content like this, consider shopping through my eBay affiliate link: ebay.us/povW0B - กีฬา
Love it! Your last video helped me out a ton in the nameplates I made for my nephew and he loved them too
I saw those on IG. They looked awesome!!!
Love it Man!!
Love your vids. Cheers from Melbourne!
Thanks for watching, Ethan!
Evergreen 🌲
Must share
Thx
Hi, I was just looking for some advice on making custom cards, you videos helped a lot thank you ✌
Thank you for watching and good luck!
Awesome video! I’ve been kicking around some custom card ideas to try out and this video may have given me what I needed to “get over the hump!”
Awesome! Good luck!
its pretty good
Do you work for panini? 😆
Have you thought about adding the square punch lines to your base template so you can avoid waste on printing more photos and then be more likely to line it up right the first time?
I have, but sometimes the punch moves a little when I use it, so I figure it's about the same either way. Not a bad idea though!
This is cool. I'm thinking about ideas for memorabilia customs. Thinking maybe multiple pieces of cardboard to build up to a 180 point or so with some of the inside cardboard cuts being bigger to avoid the late-90s/early-00s huge indent in the card. Have you tried something like that?
I had plans made up to do that with a piece of Wilt Chamberlain 100-pt floor, but I couldn't get the pieces cut small enough. I've since thought about doing it with a jersey relic. I've seen other people do it and it seems to work well. Good luck!
Honestly I got a rotary trimmer was like $60 but man cuts way straighter way better to cut and super accurate!
Thank you for the suggestion - I think I might try that if I keep making customs!
How are you getting the prints made with logo's and not getting stopped by Walgreens? I haven't tried in a while, but I remember they were super strict on licensing and printing
I've heard some stores are pretty strict. Mine never has been thankfully.
Would a grading company authentic the autograph after you made a custom card out of it?
Yeah, they just slab it as a custom cut with autograph authentication
shows everything he uses only i would wanna know something he doesn't have a link for which is the square punch cutter he used to cut the hole in the card?
I ended up using the small rectangle punch for the final product. I just added that link in the description for you. Thanks for watching!
can you share the sizes you use on paint 3d
I don't have that info handy at the moment, but I fit it all inside of this template ibb.co/9Td0f5T
Hello, your videos are super helpful! However I keep running into the same issue over and over, so I design my card online and all looks good and great quality etc. I then have tried to print them out at home using glossy paper and I think my printer isn't a good enough quality as the cards look blurry and low quality when they come out. I then tried to have them printed at staples on their gloss paper since they have better printers, that didn't work while it looked better than my printer still bad quality compared to the cards online. I then tried Walgreens and have them printed on or as a actual picture and that again slightly better but still not good quality. I tried using the paint 3d and didn't get on with it, so I use adobe express and it works really well. I am not sure what the issue is on why the cards are coming out looking way worse than the ones made online. I apologize this is such a long winded question, but any help you can provide if you have any ideas would be greatly appreciated!
Hey Alex, mine come out a little blurry as well. I'm not sure if there's any way around that unfortunately.
Image quality/pixels. If you have to stretch an image to fit your template then it will print this way. Always better to find a bigger image and shrink it.
If I wanted to create my own cards and sell them on eBay or Amazon, what are the rules or legal guidelines for artwork or photos that I use from online?
I'm guessing that's not legal. You'd probably have to license the photos, but I don't know the details for sure.
Can you post a video on how to use Paint 3d. All my stuff turns out blurry
I've had a lot of trouble with that, too. A lot of it depends on your source image. I've found if you build it within the template using a high resolution image, it works better. If you copy and paste it in later, it loses some of the image quality (especially if it's getting resized).
@@waxmuseumpodcast hey, I got 1 more question. What are the laws for copyright when making custom cards? It can only be for personal use?
@@legit4506 I haven't looked into them specifically, but I believe that's the case.
May I know, what kind of paper do you use for printing?
I get them printed at Walgreens. So it's just their normal glossy photo paper.
What font you use for epic signatures?
@@roymarkarusab1321I didn't make any notes about that unfortunately. Sorry!
The eBay link doesn’t work. What paper cutter please?
I updated the description with links for similar products now. Thanks for letting me know and good luck with any future products!
Where did you get the template of the Red?
What's your email address would love to pick your brain
I took another auto from an old UD set and used Paint3D to create this on my computer
Do you ever offer this as a service?
I haven't up to this point - it's been more of a hobby
@@waxmuseumpodcast do you have a way I can message you?
@@logantodd2186 I'm on IG under waxmuseumpodcast
✌️ PЯӨMӨƧM
Can u make me pls a costum Kobe Card and send it to me
I don't usually take requests, but I've got another video that should help give you some of the steps so you can make one on your own. Thanks for watching!
nice bitcoin card