I bought this unit, and its awesome , one thing i would like to see is to make the 2 lb hoppers with a fluidize built in it also, the reason i mention this is because sometimes on medium size jobs you have to keep slightly shaking the 2 lb hopper for the powder to flow out....but other than that...great design and awesome results with this unit....you won't regret buying the pcs1000....oh ans one more thing...the price i paid beats the competition.... , id like to mention also, if you put this on a weld cart , add a pole with a hook to keep your hose off the ground, and out of your way...it sure does help, especially when you have 2 left feet lol....Thanks and Merry Christmas from my shop to yours....
Looks like a nice unit! I will definitely upgrade to this once I outgrow my dual voltage gun or start working larger pieces!!! Thanks again for another great looking product!! Your powders are great too so far!!
Might be the best product presentation I’ve seen by a tool manufacturer. I’m sold. I’m going to pick up one of your dual voltage starter guns to do parts on a WLA 45 I’m rebuilding. A different video y’all did stated PCing is perfect for springs. I have a set of front forks for the WLA that is all OD green paint I can blast before PCing, but the springs are Crome. What prep would be necessary to power coat them the same OD green as the rest of the forks?
It kept breaking on me so I sent it back and bought a KFX1 and love the x1. It has all the settings like the top end systems with cost of the low end ones
I had an issue with the dual voltage product. The white plastic cap on the product cracked within a couple of weeks, causing about 40% of my powder to escape. Unfortunately the white cap is not removable even though the plastic jars can be removed. Had to rig it with a bunch of glue to get it to seal properly. This design looks a lot better.
I just got mine and have a few questions 1) on the 2lbs hopper the air goes from the top down a tube into the hopper. But the part that the gun hooks to don’t have a down tube it’s just 1/2 inch below the cover. Do i have this hooked up wrong? Shouldn’t there be a down tube to pull powder out? 2) on back of the unit there are extra air lines that hook up to the 5lbs and not the 2lbs. Can they just be left on and not hooked to the 5lbs hopper or will they leak air?
I got mine about 3 months ago. I do recall reading the manual and it does say that you need to ground the system. So I went to home depot and bought a 8 foot 5/8" rod and used that. I am amazed at the amount of powder that is attracted to the material after I used this new grounding rod.
Have you sold any of these machines to anybody in the Connecticut area I've been looking for someone to powder code a set of wheels for me please comment back is back or how expensive is the cheaper one where I could just do a set of wheels for myself and I'll use a stove please comment back thank you
We have a new unit coming out very soon - in the mean time here's our current best offering: www.eastwood.com/pcs250-dual-voltage-hotcoat-powder-gun.html
You go the the site, using the link here, and you’re not really on the actual site. A problem is that pop-up “asking” for your e-mail. You have the little x to close it, but it doesn’t. It’s not a real closing button, it’s just a graphic to look like it is. Even if you click the pay full price link at the bottom of the pop-up, it doesn’t close. You either have to give your e-mail, or hit the done button and back out of the site. Really no excuse for that.
I have reached out to your marketing team. I run the most active powder coating group with a large amount of members wanting this gun reviewed. please reach out to me asap.
Junk. Feels like they had harbor freight make it. Don't drop the gun im sure it will brake easily. The fogging nozzle just falls off. Rubber thats around the on/ off switch is half way on it.
I’ve had the original for 10+ years and still works Great! I usually will do a hot coat if I’m having problems in intricate areas!👍🏻👍🏻👍🏻
I bought this unit, and its awesome , one thing i would like to see is to make the 2 lb hoppers with a fluidize built in it also, the reason i mention this is because sometimes on medium size jobs you have to keep slightly shaking the 2 lb hopper for the powder to flow out....but other than that...great design and awesome results with this unit....you won't regret buying the pcs1000....oh ans one more thing...the price i paid beats the competition.... , id like to mention also, if you put this on a weld cart , add a pole with a hook to keep your hose off the ground, and out of your way...it sure does help, especially when you have 2 left feet lol....Thanks and Merry Christmas from my shop to yours....
I'm still falling back on my Eastwood dual voltage.. I definitely would like to give this one a shot.
Doc Upland Ca
Looks like a nice unit! I will definitely upgrade to this once I outgrow my dual voltage gun or start working larger pieces!!! Thanks again for another great looking product!! Your powders are great too so far!!
I wouldnt
Might be the best product presentation I’ve seen by a tool manufacturer. I’m sold. I’m going to pick up one of your dual voltage starter guns to do parts on a WLA 45 I’m rebuilding. A different video y’all did stated PCing is perfect for springs. I have a set of front forks for the WLA that is all OD green paint I can blast before PCing, but the springs are Crome. What prep would be necessary to power coat them the same OD green as the rest of the forks?
LINKS in the video and description above & SUBSCRIBE for future videos!
It kept breaking on me so I sent it back and bought a KFX1 and love the x1. It has all the settings like the top end systems with cost of the low end ones
Going to have to pick myself up one of these. Great work y’all!
I had an issue with the dual voltage product. The white plastic cap on the product cracked within a couple of weeks, causing about 40% of my powder to escape. Unfortunately the white cap is not removable even though the plastic jars can be removed. Had to rig it with a bunch of glue to get it to seal properly.
This design looks a lot better.
You guys need to offer a bigger oven and bench top exhausted spray booth. That would be awesome
Stay Tuned! We are working on something!
I just got mine and have a few questions
1) on the 2lbs hopper the air goes from the top down a tube into the hopper. But the part that the gun hooks to don’t have a down tube it’s just 1/2 inch below the cover. Do i have this hooked up wrong? Shouldn’t there be a down tube to pull powder out?
2) on back of the unit there are extra air lines that hook up to the 5lbs and not the 2lbs. Can they just be left on and not hooked to the 5lbs hopper or will they leak air?
Hows it worked out for you over the last 3 years?
Do you have it on Amazon already?
How can we get the powder coat gun? and how much is the price?
What's the best way to transfer powder from 25 pound bags to the fluidizer
If you don't ship to my country.... Pls put it on amazon... I want to buy ASAP....
Does this system need an earth ground?
I got mine about 3 months ago. I do recall reading the manual and it does say that you need to ground the system. So I went to home depot and bought a 8 foot 5/8" rod and used that. I am amazed at the amount of powder that is attracted to the material after I used this new grounding rod.
Yes it does
Have you sold any of these machines to anybody in the Connecticut area I've been looking for someone to powder code a set of wheels for me please comment back is back or how expensive is the cheaper one where I could just do a set of wheels for myself and I'll use a stove please comment back thank you
How much is this unit?
We have a new unit coming out very soon - in the mean time here's our current best offering: www.eastwood.com/pcs250-dual-voltage-hotcoat-powder-gun.html
Hi
Can I get this product in Australia??
Awesome video thank you
berapa harga`.......? dan spesifikasinya apa
You go the the site, using the link here, and you’re not really on the actual site. A problem is that pop-up “asking” for your e-mail. You have the little x to close it, but it doesn’t. It’s not a real closing button, it’s just a graphic to look like it is. Even if you click the pay full price link at the bottom of the pop-up, it doesn’t close. You either have to give your e-mail, or hit the done button and back out of the site.
Really no excuse for that.
can a dodge ram hood ornament be powder coated
As long as it can withstand being baked at 400 degrees!
i hope you have a shipping to the philippine,,
use a balik bayan box service
Looks like you spray painted, and put some stickers on an Opti Select. 😂
Cool
I have reached out to your marketing team. I run the most active powder coating group with a large amount of members wanting this gun reviewed. please reach out to me asap.
Yeah yeah ...big ovens is whst we need
I returned one for a kool koat hd, big mistake east was much better and great customer service
Wrong hose goin to the gun lol. He designed it but doesn't know... that hose he just said that goes to the gun it goes to your box of powder coat
Looks like we're just reinventing spray paint
Camaro never more ..... That's sad
Junk. Feels like they had harbor freight make it. Don't drop the gun im sure it will brake easily. The fogging nozzle just falls off. Rubber thats around the on/ off switch is half way on it.