ฝัง
- เผยแพร่เมื่อ 2 ก.พ. 2025
- Thank you for watching and here are the specs for both
M5stick plus C 1.1
General Specifications:
• Microcontroller: ESP32 (Xtensa® 32-bit LX6 dual-core processor)
• Wireless Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 4.2 BR/EDR and BLE
• Flash Memory: 4MB
• SRAM: 520KB
• Display: 1.14-inch Color TFT LCD (135x240 pixels, ST7789V2 driver)
• Battery: 120mAh LiPo Battery
• Input: 2 buttons, M-Bus interface
• Output: RGB LED, IR transmitter
• USB Interface: USB Type-C for power and data
• GPIO Pins: G26, G0, G36, G32, G33, 3V3, GND
• Operating Voltage: 3.3V
• Power Supply: 5V via USB Type-C
• Dimensions: 48.2mm x 25.5mm x 13.7mm
• Weight: Approximately 15 grams
Features:
• Sensor: Built-in MPU6886 (3-axis accelerometer and gyroscope)
• RTC: Built-in RTC module (BM8563)
• Buzzer: Internal passive buzzer
• Expansion: 6 GPIO pins via GROVE connector and exposed pins
• Software Development: Supports Arduino, UIFlow, and MicroPython programming environments
Connectivity:
• Wireless: Wi-Fi, Bluetooth
• GPIO: 26 GPIO pins from the ESP32, with 6 accessible on the device
• Peripheral Interfaces: UART, SPI, I2C, I2S, PWM, and ADC
This compact development board is often used for IoT applications, small-scale projects, or as a basic controller for various electronics projects.
M5stick plus c 2
General Specifications:
• Microcontroller: ESP32-PICO-D4 (Xtensa® 32-bit LX6 dual-core processor)
• Wireless Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 4.2 BR/EDR and BLE
• Flash Memory: 4MB
• SRAM: 520KB
• Display: 1.14-inch Color TFT LCD (135x240 pixels, ST7789V2 driver)
• Battery: 120mAh LiPo Battery (same as M5StickC Plus)
• Input: 2 buttons, M-Bus interface
• Output: RGB LED, IR transmitter
• USB Interface: USB Type-C for power and data
• GPIO Pins: G26, G0, G36, G32, G33, 3V3, GND
• Operating Voltage: 3.3V
• Power Supply: 5V via USB Type-C
• Dimensions: Approximately 48.2mm x 25.5mm x 13.7mm (similar to the M5StickC Plus)
• Weight: Approximately 15 grams
Features:
• Sensor: Built-in MPU6886 (3-axis accelerometer and gyroscope)
• RTC: Built-in RTC module (BM8563)
• Buzzer: Internal passive buzzer
• Expansion: 6 GPIO pins via GROVE connector and exposed pins
• Software Development: Supports Arduino, UIFlow, and MicroPython programming environments
• Additional Feature: Likely includes minor hardware improvements over the M5StickC Plus, but the core features remain very similar.
Connectivity:
• Wireless: Wi-Fi, Bluetooth
• GPIO: 26 GPIO pins from the ESP32, with 6 accessible on the device
• Peripheral Interfaces: UART, SPI, I2C, I2S, PWM, and ADC
This version is designed to be a slightly improved iteration of the M5StickC Plus, possibly with better power management, slight updates to the ESP32 module used, and perhaps additional minor feature improvements, though the core specifications remain largely the same.
#M5stickcplus
#M5stick
#M5stickcplus2
Song: Drip
Music by: CreatorMix.com
