@@hansley7307 you’re welcome, You can also use clear, but the results will be different, depending on how you mix and use it, I prefer to use red resin
Wooooow! Amazing work boy! How do you paint the interior of the car? With pincels as same that front bumper? And how many hours do you spend for this incredible work? New subscriber 😊✌️
to paint the interior using spray paint and for detailing using a brush, and to make this car it took me 2 weeks Thanks bro, keep suppor and seeyou in the next video
The resin im using does not dry that fast BUT i think its all in the mixture becuase the first time i used it it ran off the body but now it actualy stuck to the body and its holding its shape but its been over 30 minutes and its still not hard enough to cut like yours do in the first 2-5 minutes but man i love the 180sx it looks amazing bro i hope my customizing skills get as good as yours
maybe there is something wrong with the dosage of the catalyst or resin, especially the catalyst, you have to find out about that, you have to try it repeatedly with different dosages until you get results that are sufficient according to you, and thank you, I really appreciate that, do it until you can do it perfectly
@@Bangferdiecastdo you know if you are using epoxy resin or polyester resin? i can only get export resin here in the us but i want to get the same effect
@@ZestyBagel26 yes, you can get the same results, you just need to try until you get the right mixture, or maybe you can try "epo putty" it's easier to get and the results can be the same, just the process is different
@@Bangferdiecast yes but i was hoping to find something like resin and not putty i tried putty but i think id prefer something liquid. as the putty i’ve used has a lot of imperfections that are hard to get rid of for me atleast
@@Bangferdiecast thank you so much ive tried it yesterday and tye result is a lil better but still not hard yet but it did not run from the body. Will have to try more mixtures. Side not i used to own 2 240sx s13 one pig nose the other shark nose and now i regret selling them but i hope i find a HW s13 so i can do what i had in mind for them.
Thank you bro, in my country it is called red resin with a catalyst mixture, I don't know for sure if this item can be sent to the USA because it is a chemical liquid
@@Bangferdiecastmuch thanks bro, I want to try atleast because I realise that it's alot easier to use than epo putty and it dries in no time at all🔥🔥🔥. Keep up the amazing work bro💪🏿💪🏿💪🏿
Keren om, Sukses selalu. Ditunggu video2 berikutnya. 👍👍 Btw nempelin maketnya pake super glue merk apa ya biar kuat? Beberapa kali nyoba kadang mudah lepas 🙏
Hey, I’d really like to know what products you use to make the resin? If you could tell me the specific product names that would be great! Thanks man! Sick custom as always.
Thank you bro, in my country it is called red resin with a catalyst mixture, I don't know for sure if this item can be sent to the USA because it is a chemical liquid
@@horsepowerenthusiast6933 yeah bro i belive so. I use one called clear cast epoxy but it does not dry as fast. Ive seen some one else us finish cure resin/epoxy 5 minutes i thi k that works better
@@horsepowerenthusiast6933 yes, i found the clear epoxy one at Walmart in a blue box and at the dollar general i got a 3 piece plastic container with caps so i pour the resin and catalist in each little bottle with caps and the 3rd one with baby powder that way you leave the big bottles and just use small amounts to test the mixture. The other one i got it a a hobby store not hobby lobby but at a storw that does rc planes
Izin nanya om, boleh di spill kah om kata kunci resinnya apa ya kalo mau cari di marketplace online? Saya mau coba" sesimple bikin ducktail paling om, bisa rapih banget ternyata ya bodykit dari resin kalo yg ngukir jago
Silahkan dicoba om, dari segi waktu pasti lebih singkat, masing masing pasti ada plus minus om, dicoba keduanya ya ga ada salahnya sampe ketemu yang bener bener sesuai kebutuhan
Ijin numpang nanya seputar epo putty om. Sekiranya butuh waktu berapa lama ya untuk kita nunggu dari dia selesai diukir sampai siap diamplas? Terima kasihh, cakep abis customnyaa!
Selesai diukir? Terus ngamplas? Ga pake nunggu om, kalo udah bisa diukir berarti udah bisa diamplas juga, kecuali baru tempelin kebody buat nunggu kering itu sekitar 3-5jam kalo epo putty
Awesome build. Love the modifications and paint. Awesome build and video!
Thank you sir, i really appreciate that, keep support and see you in the next video
Wiihh PATEEEN MANTAAP.🔥🔥🔥. Kelebihan Resin cepat kering, walaupun Tipis tapi Kuat 👍
Nais!! Terima kasih om, keep support ya
Ga pernah ke lewat kalo notif muncul, next 370z ya om idolaaa🔥🔥🔥
Terima kasih ya om, siap ditampung dulu ya om🙏 semoga nanti bisa dibuat, keep support om
Makasih bang ini video yang ngejelasin secara detail❤
Hasil karya anak bangsa semangat bng ferdy
terima kasih, semangat terus pokonya mah💪
Beautiful! I love it, great work! Wish I could customize like this
Yeah let’s do it bro, thankyou and see you in the next video
everytime new surprise😍
I hope🙌 thanks bro
Keren dan rapi sekali saya sangat suka ini custom simpel elegan good job 👍🤩
Terima kasih banyak om, keep support dan sampai bertemu divideo selanjutnya ya
What type epoxy resin do you use? Because im confused what type there's so many in online shopping
Red resin 157 in my country
@@Bangferdiecast thank you, have
You ever try other type resin like clear? Which one is the best for you?
@@hansley7307 you’re welcome, You can also use clear, but the results will be different, depending on how you mix and use it, I prefer to use red resin
Same problem bought something like that but the material didnt stick got hard to quick even with less of the activetor
Akhirnya semua bakal resin pada waktunya.... 😁😁 tapi yakinlah enak eputy di pernafasan... Wkwkwkw
Masing masing ada plus minusnya, tetaplah berkarya apapun itu bahannya💪 makasih om, keep support ya
@@Bangferdiecast pasti om... Video baru pasti nonton om
Beehhh cakep mas...
Terima kasih om, sampai ketemu divideo selanjutnya ya
bro how mamy minutes do i need to wait to form my epoxy putty in hotwheels?
approximately 3 hours
I loved this custom, could you do one putting a roof on a convertible?
Thankyou, take a look at my mazda miata video
keren bgt om 😍
Makasih om, keep support ya
Semangat terus bangfer
Ajieb om..😅👍
Cool nissan ❤
Thanks, keep support
Wooooow! Amazing work boy! How do you paint the interior of the car? With pincels as same that front bumper?
And how many hours do you spend for this incredible work?
New subscriber 😊✌️
to paint the interior using spray paint and for detailing using a brush, and to make this car it took me 2 weeks
Thanks bro, keep suppor and seeyou in the next video
1st❤🎉
thankyou, keep support
What is calalyst is it hardener?
Yes, right
Woah!!!
Thanks bro
So sick!!🙏 What molding clay do you use???
I didn't print it but I engraved it manually
@@Bangferdiecast i know i saw that but what putty do you use??
@@chefke7722 i use resin
Tutor video om bikin spliter sama diffuser om 🙏🙏
Difusser sudah pernah ada tutornya di video mustang merah om, kalo spliter caranya mirip mirip kaya gitu, silahkan dicek dulu om
what type of resin did you use? Epoxy? Polimer?
Red resin is polyester fiberglass resin with MEKP hardener. There's plenty of them in the US.
Amazing buddy ❤
Next nissan silvia sileighty
Is any catalyst ok?
Catalyst for reson
Everyone uses this sort of resin, but I can’t figure out what it is or where to get it
the type of red resin and I usually buy it at a chemical shop
Keren bang
Terima kasih om
bisa tahu guna cat acrylic merk apa? dan kuas merk apa?. salam dari customizer malaysia 🇲🇾
Cat akrilik merk sakura dan kuas merk cotman, salam🙏
@@Bangferdiecast makasihhh
@@naqib518 sama-sama om
Gila keren parah bang
The resin im using does not dry that fast BUT i think its all in the mixture becuase the first time i used it it ran off the body but now it actualy stuck to the body and its holding its shape but its been over 30 minutes and its still not hard enough to cut like yours do in the first 2-5 minutes but man i love the 180sx it looks amazing bro i hope my customizing skills get as good as yours
maybe there is something wrong with the dosage of the catalyst or resin, especially the catalyst, you have to find out about that, you have to try it repeatedly with different dosages until you get results that are sufficient according to you, and thank you, I really appreciate that, do it until you can do it perfectly
@@Bangferdiecastdo you know if you are using epoxy resin or polyester resin? i can only get export resin here in the us but i want to get the same effect
@@ZestyBagel26 yes, you can get the same results, you just need to try until you get the right mixture, or maybe you can try "epo putty" it's easier to get and the results can be the same, just the process is different
@@Bangferdiecast yes but i was hoping to find something like resin and not putty i tried putty but i think id prefer something liquid. as the putty i’ve used has a lot of imperfections that are hard to get rid of for me atleast
@@Bangferdiecast thank you so much ive tried it yesterday and tye result is a lil better but still not hard yet but it did not run from the body. Will have to try more mixtures. Side not i used to own 2 240sx s13 one pig nose the other shark nose and now i regret selling them but i hope i find a HW s13 so i can do what i had in mind for them.
Genius
Thanks sir, kerp support
Amazing bro🔥🔥🔥🔥🔥🔥 what's that resin called and what site can I order some to ship to the US
Thank you bro, in my country it is called red resin with a catalyst mixture, I don't know for sure if this item can be sent to the USA because it is a chemical liquid
@@Bangferdiecastmuch thanks bro, I want to try atleast because I realise that it's alot easier to use than epo putty and it dries in no time at all🔥🔥🔥. Keep up the amazing work bro💪🏿💪🏿💪🏿
@@andrewalleyne312 yeah let’s do it bro, thank you, i really appreciate it
What resin is this
Red resin
Keren om, Sukses selalu. Ditunggu video2 berikutnya. 👍👍
Btw nempelin maketnya pake super glue merk apa ya biar kuat? Beberapa kali nyoba kadang mudah lepas 🙏
Aamiin, terima kasih om, keep support ya, pakai merk dextone om
Hey, I’d really like to know what products you use to make the resin? If you could tell me the specific product names that would be great! Thanks man! Sick custom as always.
Thank you bro, in my country it is called red resin with a catalyst mixture, I don't know for sure if this item can be sent to the USA because it is a chemical liquid
What type of resin did you use?
Its a fiberglass resin
@@alexissd4479 Wait, so red resin is actually fiberglass resin?
@@horsepowerenthusiast6933 yeah bro i belive so. I use one called clear cast epoxy but it does not dry as fast. Ive seen some one else us finish cure resin/epoxy 5 minutes i thi k that works better
@@alexissd4479 Are you in the US? If so, where can I find it?
@@horsepowerenthusiast6933 yes, i found the clear epoxy one at Walmart in a blue box and at the dollar general i got a 3 piece plastic container with caps so i pour the resin and catalist in each little bottle with caps and the 3rd one with baby powder that way you leave the big bottles and just use small amounts to test the mixture. The other one i got it a a hobby store not hobby lobby but at a storw that does rc planes
Build Nissan GT-R 34 LBWK
Maybe someday
om potong pla plate nya pakai apa ya? kok bisa rapih gitu potongnya, saya pakai cuttter atau gunting susah rapinya 🥲
Pakai cutter kok om tapi setelah potong diratain atau alusin lagi pake amplas
saya masih belum mahir main resinya pak, selalu gk balance ukurannya, mungkin lebih enak klo punya mesin printing 3d
Terus dikulik om, sampe terbiasa dan hasilnya cukup, tapi memang terkadang menggunakan feeling juga bisa gagal sih
Pakai Bor nya merk apa gan, klo boleh tau...?
Mini drill molar om
Request please if you read this Daihatsu grandmax custom like ford super van 4
With wide body like a lbwk silhoutte work
Maybe oneday i made it, thankyou bro, keep support
Spill cara buat spion nya om
Pake pla square bar, dikasih kawat dan kawatnya ditanem kebody diecast, terus planya dibentuk sampe berbentuk spion sesuai yang diinginkan
Izin nanya om, boleh di spill kah om kata kunci resinnya apa ya kalo mau cari di marketplace online?
Saya mau coba" sesimple bikin ducktail paling om, bisa rapih banget ternyata ya bodykit dari resin kalo yg ngukir jago
Mau tanya dong om klo pakai resin bening bisa gak ya?
i like your videos can you make one for me i just like 😊😊😊
Thankyou sir
gimana bang rasanya first time pake resin...apa kayaknya kita perlu pake resin juga deh
Silahkan dicoba om, dari segi waktu pasti lebih singkat, masing masing pasti ada plus minus om, dicoba keduanya ya ga ada salahnya sampe ketemu yang bener bener sesuai kebutuhan
Ijin numpang nanya seputar epo putty om. Sekiranya butuh waktu berapa lama ya untuk kita nunggu dari dia selesai diukir sampai siap diamplas? Terima kasihh, cakep abis customnyaa!
Selesai diukir? Terus ngamplas? Ga pake nunggu om, kalo udah bisa diukir berarti udah bisa diamplas juga, kecuali baru tempelin kebody buat nunggu kering itu sekitar 3-5jam kalo epo putty
@@Bangferdiecast Ohh berarti kebalik nih saya hahaha. Oke omm terima kasih pencerahannya. Amplas buat putty nya pakai yg nomor brp ya om?
@@rayyy1816 sama sama om, kalo grid kasarnya selera aja sih om yng sekiranya nyaman dan ngebantu, tapi kalo ngalusinnya pake yang 1000
@@Bangferdiecast Siapp, thanks yaa omm. Cukup membantu. Sukses terus ya om,.lanjut berkarya
@@rayyy1816 Aamiin
For sale???😮😅
I’m sorry, someone has bought it
@@Bangferdiecast it was my dream car 🥺🥺 can u make another copy for me i can buy it i can buy for 200$ pls i'm in canada
@@farhadjuve448 I will I got you.. do you want this exact car or do you want me to add a little touch to it
@@farhadjuve448 are you interested?… if so do you want this exact replica or do you want me to do my own thing on it
Skrg resin nih om?.... Serius😅
Iya om mencoba resin
@@Bangferdiecast epo putty akan ditinggalkan nih om? 😊
@@roeldiecast2341 gatau kalo nanti om, untuk saat ini masih dipake untuk beberapa kebutuhan, disesuaikan sama kebutuhan aja
@@Bangferdiecast tetap semangat om😁
nooooooooooo
Yes yeah……..