The pump has a cable with 3 holes that is connected on the left hand bottom side of the pump based on this motherboard. I can' find where to connect mine on the asus prime z790-a. Does anybody know where to connect it? Thanks.
I bought the 360 mm vetroo v360 white water cooling - check to configure the speed of the fans and pump, how should I do it to lower the temperatures of the processor, do you have an application to regulate this, could you send it to me or where to download it?
Does anyone know the place to plug in the 3 pin pump wire,I used the 3 pin RGB slot on my MSI Tomahawk b650 I'll see tomorrow I'll have to install Windows. 😀
RGB isn't working on my fans the fans and pump are running I have RGB on the pump just not the fans any suggestions on how to fix this? Thanks again, Max
@vetroous I tested the voltage that is going to 3pin rgb on the fans I have 5vdc on my Thermalright fan and rgb hubs but no rgb I'll just buy some good fans and replace them it's not worth the hassle of dealing with this anymore but I'll not purchase another Lurker V360 I'll find something that works pump is great fans are great rgb just isn't working!!! Maxwell
@@enderlemaster4411 yes I found out. There is a four pin connector on the motherboard where you put the three pin in. On my motherboard, it’s located right above the first ssd slot
@@d.r.7468i was able to figure it out but because it was my first time building i had no idea that the 3 pin could also go into the 4 pin but i was able to figure it out after staring at the cpu fan slot long enough
Hi.iam using a v360 on a 1151 motherboard. Had around 2 years ago can I use on a 1700 set motherboard with the backplate or will I need a new cooler?.thx
no, do not need a new cooler. You can purchase Vetroo LGA 1700 mounting kit for this Vetroo V360 and then use this liquid cooler on your 1700 motherboard directly.
@vetroous what about the screw alignment holes on the water lock itself. As backplate is bigger.will the holes from backplate that take the screws.from Waterbeach still line up?.thx
My 1 to 3 splitter cable came with only 1 cable having 4 pins. The rest were 3 pins. How do I deal with this? Also the cpu cable is a 3-pin. There’s no 3-pin connector on any motherboard
Can you connect the pump cable (says 4 pin in manual, but mine is 3 pin), to a PWM sppitter hub and then connect the hub to the CPU fan header on the motherboard?
this video needs more info on the wiring.
Every case is different, would only apply to a certain case
Didn't include info on install an LGA2011-3, but I figured it out on my own.
The installation steps are the same
Appreciate the thorough demonstration of every step! Saved me a lot of time and confusion
Thank you very much for your support and purchase from us, if you have any problems, please contact us any time.
My aio did not come with the springs but it has everything else is there a way I can still use this aio without those springs
we updated the screws, and most of motherboard doesn't need springs
@CapalotTD how did you install without the springs bro, please tell im facing same issues.
@@YashvirGaming please contact us via our support email: support@vetroo.com with your order number, and we will solve for you
The fact that i have to come watch the video bcs the use manual wasnt helpful enough 😂😂😂
Does the Vetro V360 keep an i9 13900k cool enough to game all day in a mid tower case?
Yes, it does
Is it possible to twist the "V" on the pump?
My fans didn’t come with the Vetroo logo symbol on them like in the video, is this right?
Where did the 4th 5v 3pin cable come from. looks like the video skipped right over that part.
it comes from pump
The pump has a cable with 3 holes that is connected on the left hand bottom side of the pump based on this motherboard. I can' find where to connect mine on the asus prime z790-a. Does anybody know where to connect it? Thanks.
I just bought a 240 Lurker and it didnt come with buckle screws (the screws with sprrings)…. What should i do
Please contact: support@vetroo.com
excellent! perfect. thank you.
Thank you very much for your support
@@vetroous thanks helped me installed on AM4 motherboard i was about to go crazy
@@YashvirGaming you are welcome
Will this aio fit am5 boards with the included am5 motherboard mounts and the mounts that the aio comes with?
Hi, the V360 fits AM5 and provides AMD bracket for installation.
I bought the 360 mm vetroo v360 white water cooling - check to configure the speed of the fans and pump, how should I do it to lower the temperatures of the processor, do you have an application to regulate this, could you send it to me or where to download it?
you can enter BIOS to change the fan speed to lower the temperature.
Do both kinds of screws and mounts that are for either intel or amd mother board come with the cooler?
Yes, this cooler comes with the screws and mounts are for intel and amd motherboard
Does anyone know the place to plug in the 3 pin pump wire,I used the 3 pin RGB slot on my MSI Tomahawk b650 I'll see tomorrow I'll have to install Windows. 😀
You can connect the pump lighting cable to the fan lighting cable in series and then connect to the 5V 3Pin interface of the motherboard.
RGB isn't working on my fans the fans and pump are running I have RGB on the pump just not the fans any suggestions on how to fix this? Thanks again, Max
Would you mind to send a picture of wires connection to support@vetroo.com? Thank you
@vetroous I tested the voltage that is going to 3pin rgb on the fans I have 5vdc on my Thermalright fan and rgb hubs but no rgb I'll just buy some good fans and replace them it's not worth the hassle of dealing with this anymore but I'll not purchase another Lurker V360 I'll find something that works pump is great fans are great rgb just isn't working!!! Maxwell
Where does that second connector on the pump go?
so we were both in the same place with that random 3 pin, since its been a month, have you found out
@@enderlemaster4411 yes I found out. There is a four pin connector on the motherboard where you put the three pin in. On my motherboard, it’s located right above the first ssd slot
@@d.r.7468i was able to figure it out but because it was my first time building i had no idea that the 3 pin could also go into the 4 pin but i was able to figure it out after staring at the cpu fan slot long enough
Is it possible to change the fans? I did but now my bios says it's missing the fans.
Do you mean the bios cannot detect the fans? If so, you need to check the fan connection to motherboard
Where does the feser cable come from? The cooler itself, right?
Yes, It comes from the water cooling.
It is right put the watercoller fans inside the pc?
I am thinking about buying a NZXT h9 and it comes with a controller/hub would I be able to connect this hub as well as that hub?
Yes, you can do it.
@@vetroous thanks! They look great and would work amazing I think
@@TjTjTEADGE You're welcome. If you have any question please feel free to contact us.
@@vetroous no prob
Hi.iam using a v360 on a 1151 motherboard. Had around 2 years ago can I use on a 1700 set motherboard with the backplate or will I need a new cooler?.thx
no, do not need a new cooler. You can purchase Vetroo LGA 1700 mounting kit for this Vetroo V360 and then use this liquid cooler on your 1700 motherboard directly.
@vetroous what about the screw alignment holes on the water lock itself. As backplate is bigger.will the holes from backplate that take the screws.from Waterbeach still line up?.thx
@@mshoulders100 the Vetroo LGA 1700 mounting kit including the new 1700 bracket and suitable screws, please do not worry
Where does 3 pin from the pump go?
Hi, it goes to the SYS FAN /PUMP FAN on the MB
@@vetroousThank you
Can I put it in case front with radiator tubes down orientation?
You can design it to fit your chassis.
Thank you so much I was using the Intel one instead the and thank you
Amd
@@Tokyoqtt it can support the intel and AMD
Does this come with thermal paste, or do I have to buy it separately?
It comes with!
may I know where did you connected the splitter wire to motherboard?
it is 5v RGB and CPU FAN port
Hi, I know it says it is lga1700 ready but can I use this on a i5-12600k cpu
The 360mm AIO can't support LGA1700 now, only the V240 can support LGA 1700
yes, it can fit your i5-12600k cpu
Como configuro el color de las luces argb?
Hi, you can change the color using the controller or on the BIOS.
Hola amigo muy buen video, me gustaría saber si esta refrigeración Líquida va a ir bien con un i9 13900k
Yes, it can work well with i9 13900k.
And bubles on vertical position?
is it compatible with an LGA1200 morherboard??
Yes, of course.
how do i change the rgb on it is there a certain software i have to download or?
you can enter BIOS to change the rgb on it
Is this cooler enough for a Ryzen 5 5700x?
V360 is cool enough for this CPU.
Is there liquid in it when delivered as it is extremely light?
Yes, it is
Does this product come with thermal paste?
yes， it include the thermal paste
My 1 to 3 splitter cable came with only 1 cable having 4 pins. The rest were 3 pins.
How do I deal with this?
Also the cpu cable is a 3-pin. There’s no 3-pin connector on any motherboard
You just put it on the connector, no problem.
Does the "V" twist on the pump?
No, does not twist on the pump
Where am5?
Mine didnt come with springs what do i do?
Same did you ever figure it out?
I just screwed it in without the springs, been working fine for me @@A_Loaf_Of_Beans
@@McVerdictHow? Mine didn't have the spring screws either and im struggling
@@AVoid_1008 I ended up doing it without the springs and haven't had any issues since
@@McVerdict I don't know how you were able to, that thing doesn't like Mounting without it 😭
I dont have a reset cord
You can email us to enjoy warranty service.
Are the fans quiet?
the fan is PWM, can adjust the speed
How do you control the temps?
it is PWM mode, and the fan speed will adjust according to the temps
How can i change the color?
Yes, of course. They are ARGB fans and you can change the colors on the bios setting.
Can you connect the pump cable (says 4 pin in manual, but mine is 3 pin), to a PWM sppitter hub and then connect the hub to the CPU fan header on the motherboard?
hello friend, the 3pin of pump should connect to the 3pin of controller hub, the 4pin of pump connect to motherboard SYS FAN/ PUMP FAN port
@@Medieval1-1 did you ever figure this out? I have everything hooked up, but my fans are running at get Max speed.
ply may u send me one for free