I have box logo cool Breeze opal white(july 2006 piece)..... The fans blades bent badly and the blade screws rusted.... That's why I threw the screws and blades away...i need to get the motor repaired as the auxilary winding is break...just need to solder that and grease the bearings and the fan will work as good as new...i am thinking to put new screws and 36" Blade set...because with that the fan will work somewhat better.... Happy that the fan never burned until now
Un luckyly my fan was G logo fan, it got bearing problem like tak tak tak tak noise , after replacement of bearing it runs for 2 hours and the coil got burnt, so I rewinded my fan for 200 rs with copper coil and it was lesture brown and 48inch fan and it runs over 385-410 RPM and it was super powerful than old winding.
Bro I have the same ceiling fan it runs for 9months and it has not using for like 4 to 6 years. And I searched for it and got it and tested it was running good and the capacitor was slowed and I changed 2.50 oil filled capacitor and it runs for 7 months. And it got bearing problem so I gave it to repair for like a week ago and finally it was serviced so like 2 days ago I used it for 2 hours and suddenly turned off so I replaced the 2.5 globe capacitor and still not running. So I removed it and the whole fan was smelling like a wire burnt and the fan is very hot. And what is the problem of it bro?
@@Electroplusenergy8173yes you are right. No need to replace the capacitor just replace the bladesets with brand new and rewinded the fan with copper winding, my fan got short circuit due to continuous capacitor replacement with aluminium winding, just change coil witk copper winding, change the bladesets with new and the the new capacitor and dont use oil filled capacitor. Because, oil filled capacitor is used only for 14pole motor, 56inch fam and any other vintage fans. Use "KELTRON 2.5 MFD PVC SILVER TYPE CAPACITOR" for better speed. I have G logo cool breeze and it is super powerful with copper winding, new capacitor ( that i typed in capital letters) and new bladesets. And the speed of my cool breeze is 385-410 RPM .
Awesome fan. Awesome review
It's more suitable for AC rooms than HS.
I have box logo cool Breeze opal white(july 2006 piece)..... The fans blades bent badly and the blade screws rusted.... That's why I threw the screws and blades away...i need to get the motor repaired as the auxilary winding is break...just need to solder that and grease the bearings and the fan will work as good as new...i am thinking to put new screws and 36" Blade set...because with that the fan will work somewhat better.... Happy that the fan never burned until now
Un luckyly my fan was G logo fan, it got bearing problem like tak tak tak tak noise , after replacement of bearing it runs for 2 hours and the coil got burnt, so I rewinded my fan for 200 rs with copper coil and it was lesture brown and 48inch fan and it runs over 385-410 RPM and it was super powerful than old winding.
Nicely Explained Bro
In sure breeze category, I like the brizair's blade design because it's head looks like Crompton hs
Exactly, As you said cool breeze is somewhat better than other breeze category fans with tincan blades, this is average
@@Electroplusenergy8173 oh nice 👌
At my grandma’s house she has this but it is crompton greaves ltd very nostalgic fan
Bro , will the blade set and canopy of this fan will available in amazon?
No
Nice fan
Nice video 👌
Thanks bro 🤝🏻
@@ElectroPlusSM You're welcome bro 😊
Bro I have the same ceiling fan it runs for 9months and it has not using for like 4 to 6 years. And I searched for it and got it and tested it was running good and the capacitor was slowed and I changed 2.50 oil filled capacitor and it runs for 7 months. And it got bearing problem so I gave it to repair for like a week ago and finally it was serviced so like 2 days ago I used it for 2 hours and suddenly turned off so I replaced the 2.5 globe capacitor and still not running. So I removed it and the whole fan was smelling like a wire burnt and the fan is very hot. And what is the problem of it bro?
And bro my cool breeze is running like 395 to 400 rpm dut to the oil filled capacitor is used
Check the coil. Probably it burnt.
The coil has been damaged and those 3 coil wires are burned.
And how will it cost to repair bro?????
@@sivadhana8730 350 - 400 for rewinding
Will they completely change the coil or change the burnt coil??
Yesterday I have bought this fan,it's the best,havells orient is crap
Good fan
What size it is?
How long is the downrod?
265mm(11") sweep 48"(1200mm)
This is 48" & the downrod size is 9"
Electrical bro this downrod is 9"
@@ElectroPlusSM I have box logo opal white one....that has 11" And that's original
@@electricalbro6308 oh good
Coolbreeze is the oldest cheapest use and throw fan from crompton, in early 2000s it costed just ₹650-700
Exactly
@@Electroplusenergy8173 Crompton is the best,Havells orient are crap,i have used those,Havells orient only put emphasize on the advertisements
@@navdeepsingh-pk5qk Exactly. Even brizair is better than the whole orient, new polar, luminous companies
One more thing is also about the flat motor costs less parts so it's cheap
I want to exchange my 2 cool breeze fans I want buy Crompton Auro what to do that 🥺.
What happened actually?
@@ElectroPlusSM no air flow in cool breeze iam changing 3 Times capacitor day by day slowing 2 fans
Ok then go for Crompton Aura its really a good fan
@@Electroplusenergy8173yes you are right. No need to replace the capacitor just replace the bladesets with brand new and rewinded the fan with copper winding, my fan got short circuit due to continuous capacitor replacement with aluminium winding, just change coil witk copper winding, change the bladesets with new and the the new capacitor and dont use oil filled capacitor. Because, oil filled capacitor is used only for 14pole motor, 56inch fam and any other vintage fans. Use "KELTRON 2.5 MFD PVC SILVER TYPE CAPACITOR" for better speed. I have G logo cool breeze and it is super powerful with copper winding, new capacitor ( that i typed in capital letters) and new bladesets. And the speed of my cool breeze is 385-410 RPM .
0:28
G logo blades are good than this
It,s blades are similar to orient fan blades
But better than orient
Little bit wobbling
Better than super briz deco, seawind, Sea breeze, sea bliss etc
@@ElectroPlusSM Yes
Havlles farts😂😂😂😂😂
Capacitor needs to be replaced.