DIY Automatic Plant Watering System Using Arduino !!!
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2022
- Hey guys im back with another vedio, today in this vedio i will show you how to make automatic watering system using Arduino.
Code of this project - drive.google.com/file/d/1t4kA...
Circuit diagram - postimg.cc/ZBtgwyr5
Products used in the project 👇
1.Arduino uno - www.tomsonelectronics.com/col...
2. Water pump -www.tomsonelectronics.com/pro...
3.jumper wire - www.tomsonelectronics.com/pro...
4.relay module -www.tomsonelectronics.com/pro...
5.soil moisture sensor -www.tomsonelectronics.com/pro...
6. forex sheet -amzn.eu/d/74iIaaB
7.6mm pvc tube -dl.flipkart.com/s/RHgXzHNNNN
.
.
.
Song: Ikson - Lights (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Lights (Vlog N...
#NoCopyrightMusic #VlogMusic #VlogNoCopyrightMusic - วิทยาศาสตร์และเทคโนโลยี
Very helpful 👍
Thank you Technoliq ❤️✨
The pump should be submerged at all times or you can ruin it. Thank you for the video, nice project. 👍
U r life saver for my project. I watched pther tutorial but could not understand. Thank you
OMG I watch so many videos to finish my project but your video help me to understand it better. thank you so muchhhhh
Is the code correct?
@@rajeevprabhu1954 yes po
@@bulauansherylangelim.3709 yes it worked for me as well....btw you are just 2 months late 😂
@@rajeevprabhu1954 hi guys, can u explain it to me?
@@piashaynnemanayon6744 yea sure....i will recommend you to search "How to make Automatic Plant Watering System using Arduino UNO and Soil Sensor" on youtube there is video on channel named techie lagan.....you can blindly copy that video and circuit diagram is also very nicely given there 👍
Thank you 🎉.this is a video I want
Best model 👍👍👍👍👍👌
You will be a life-saver if this works for my project to succeed
hello, can i add a program app into this watering system? like i can toggle the between auto and manual click(manipulate the water volume and time)
Hello, why does the pump still pump water even the moisture sensor gets wet? Thank you
can you replace the power jack with a battery?
Is there one inch water pipe arduino controler?
i used something similar,but instead or an Arduino i used an ATTiny 88 programmer board wick works nicely
Hello, can I still use the 5V relay module if I'm using a 12V DC power source and a 12V pump?
Yes but for more efficency use a 12v relay
pls help me connect the mini water pump to relay
can i use the 12v battery pack on both Arduino and water pump?
Which battery is used for this
Did you use the normally open on close on the relay
Yes
How I will power the circuit...I guess from Hw battery
What is the 12v power jack? Need to connect to? I searched on the Google and it's not the same as in the video
It is the power supply for the relay
@@ROBO_MAC I see.. thank you!
Hey will that double relay work?
Hi! Can i have the schematic sketch for this
Won't it overwater the plants since it pumps water everytime it gets dry? Some plants need drying-out in between waterings.
Was thinking the same thing. Most plants can take quite some abuse when it comes to underwatering, and still make an amazing recovery. But root rot is pretty much a death sentence...
Bro how power is supplied to ardino and
Here I have used 2 power supply, one for ARDUINO and other for PUMP so that there will be no delays in working
hello, i've met a problem. my pump is not starting and i did everything u did there, i even have almost the same components as you do. my moisture sensor is set on digital, should i control it from that screw from the module or smth? i tested it rn, if the sensor is in water at the start of the test, pump is not starting, i take the sensor out, pump starts, but after that, if i put the sensor back in water, the pump won t stop, or it will be delayed by like 5-10 sec
Try using another power source for the pump
@@renutewatia5183 i tried 3 different powersources, 3 different types of moisture sensors and also tried both analogyc and digital signals for the sensors and still not working XD
@gabibotea700 then Idk btw I m very young m in 7th and doing this for a project
It may be the issue with the sensor
Try testing each and every board by uploading example code !!
I don't have 12 volt power jack so can I do cross connection an apply code will it work
Yes
Hi,
Can I use rain drop sensor instead of soil moisture sensor in
No
thanks for the video
btw can i add an lcd display to this project and what should be changed in code ?
Yes, of course
Is it need battery
Selangnya beli dimana bang?
what 12Volts battery did you use? Do we use regulator for this?
No, Arduino Uno supports 12v
Can you help me sir . Why is that , when the sensor is wet the pump still works ?
I followed all the steps but the pump don't stop even it is wet of water
The sensor may be faulty
Can you make a vid for a simpler system? I was thinking of a timer so like every 3 days it waters the plant for like 10 seconds. Also instead of using a pump just put the water container above the soil and rig a valve to open and close. Could that work? Seems a lot simpler and more effective since there arent as many components.
yes will work
How do i connect the battery ??
thank you i might win the science fair.
Really
Reply me bro i have a problem for this code
What will be the amount for this thing
Hello, this is such an awesome project. How would I connect the same relay module and sensor to an Arduino pro mini? Is this possible, this would be such helpful to know. Thankyou very much
You can connect anywhere in the digital pins , you should change the code accordingly
@@ROBO_MAChlo sir plz sir kl ye mera project h sir work nhi kr raha sir solution digiye
What was the app you used when you programmed the code, I can't find it?
Idk broo😮
bro. sorry for disturb you. How you connecting relay with dc water pump? it was not clear to follow your step on this video. please respon . Thanks a lot
Connect the pump's +ve to N\C of the relay and -ve to any power source and +ve of the power source to the COMMON pin of the relay
I also couldn't figure this out
How did you given power supply
Here I have used 2 power supply, one for ARDUINO and other for PUMP so that there will be no delays in working
I have given external power supply to the pump.
Where u connected code sir
can i use 9v for the power supply?
Same doubt bruh
The required Code is not working properly. pls have you other code
It is working properly
Can you give me the code with blocks
okay lang ba gumamit nag relay with optocoupler instead normal na relay?
hi po okay napo ba project niyo?
English?
What app you use to insert the code?
That is what I am looking for too
why the code from the video is different from the code on the description
That's what I am saying!
Boks kese banaya?
Using Forex Sheet
the code is copied from another source,can you provide the exact code?
That's what I am looking for too!
solo ese codigo tienes
This project is working also without the arduino board.
Yes, you can try replacing the microcontroler with any ic's like 555
How much did you spend for this ? Bro
Hi! Actually I wanted to ask what If I use 2 relay modules will it still work with the same connections and code .
Yes
il video e lo schema illustrano 2 collegamenti diversi...
English?
power voltage
Total cost?
Under 1k
The code is not working sir 😅
Hi did you find correct code
What app you use sir?
int water; //random variable
void setup() {
pinMode(3,OUTPUT); //output pin for relay board, this will sent signal to the relay
pinMode(6,INPUT); //input pin coming from soil sensor
}
void loop() {
water = digitalRead(6); // reading the coming signal from the soil sensor
if(water == HIGH) // if water level is full then cut the relay
{
digitalWrite(3,LOW); // low is to cut the relay
}
else
{
digitalWrite(3,HIGH); //high to continue proving signal and water supply
}
delay(400);
}
@@jezryllekeinbinunag121 Arduino droid
copied from techie lagan probanly
Doesn't matter tho.
@@rnd_penguin Woah 14 minutes ago!
can u help me in private ???
where's the code sir?😢
It is in the description. It is a link
ขอโค้ดหน่อยครับ
Its given in the description
help the code is not working🥹