How to Set Up the Sterlitech Automated Hybrid Skid System
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Learn how to set up the Sterlitech Automated Hybrid Skid System by watching this step-by-step user guide.
0:08 Set up pump
0:22 Set up digital panel
1:05 Mount magnetic tablet
1:17 Connect the chiller
2:03 Set up high pressure gas supply
2:52 Swage fitting
3:17 Mount cell or housing plan
3:28 Inspect internal components
3:49 Turn on breakers
4:04 Plug power cord and turn power on
Sterlitech Automated Hybrid Skid Mounted Membrane Filtration System
Built for evaluating performance of membranes widely used in reverse osmosis, forward osmosis, nanofiltration, ultrafiltration, microfiltration, and membrane distillations. Sterlitech Skid Mounted Membrane Filtration Systems are available in single or multiple cell configurations in both parallel and series modes. Digital Skids display and record the flow parameters collected by the integrated sensors in real-time for flow rate, temperature, pressure, conductivity, and weight.
Specifications:
Scale / Membrane Area: Medium
Cell / Housing Type: Sepa, 1812 Housing
Process Configuration: CFF/TFF
Lines: 2
Membrane Types: MF, UF, NF, RO
Power: 110V or 230V
Temperature regulation: Yes
Data logging: Yes
Touchscreen interface: Yes
Standard Features
- Crossflow or Forward Osmosis Orientation
- Bench-top Design that maximizes the workspace while minimizing the footprint
- Capable of pressures up to 1000PSI(69 bar)
- Temperature Resistant up to 180F
- Precise Flow-rate and Pressure control
- Heat Exchanger Included (Chiller sold separately)
Digital Advantage
- Monitor Conductivity and Temperature
- Measure permeate flow
- Watch your data live or record it and analyze it later
Additional Features (available upon request)
- Chemical Resistant Materials
- Chillers
- Flow Rates up to 8.8 GPM
- pH Sensor Integration
=====
Remove the oil fill cap and then use a knife to remove the black film. Reinstall the cap.
Remove the two screws on the back of your digital panel with a 3/16 Allen key, and carefully lift and rotate the digital panel until it rests on the backstand supports.
Reinstall the screws into the back of the digital panel through the slots on the stand. Tighten the screws with a 3/16 Allen key.
Mount the magnetic tablet to the panel and plug it in with the included USB cable.
To connect the chiller, use a tube cutter to cut two sections of 3 1/2 foot, 3/8 polypropylene tubing, which is included in your system.
Take the first section of the tubing. Connect one end into the fluid outlet on our chiller, insert the tube into the fitting, and tighten the fitting. Connect the fluid outlet to the coolant inlet on the bottom side of the heat exchanger. Repeat the process for the other tube section. Install it into the fluid inlet on our chiller, and connect the other end to the coolant outlet on the heat exchanger. Plug in the power cable.
To set up the high pressure gas supply, here I'm using a tank of nitrogen gas.
Install the regulator assembly into the tank by inserting the stem and twisting the nut by hand. Once hand tight, be sure to tighten it with an adjustable wrench.
Next, connect one end of the high pressure gas hose to the outlet of the regulator assembly. Insert the tube stub, then thread the nut by hand. Once hand tight, use a 9/16 inch wrench to snug them up. If this is your first time making this connection, you'll need to make sure to swage this fitting.
To do this, insert the tube stub and then give it 1 1/4 turn on the nut. Take the other end of the hose and insert it into the high pressure gas inlet. Repeat the process for the other tube. Once it's hand tight, use a wrench to secure the nut with a 1 1/4 turn to snug the fitting in.
Next, mount and connect the cell or housing you plan to use with your system. For help connecting and mounting different types of cells, refer to the Sterletec MPD page on our website.
Now, with our power cord disconnected from any power supply, use a flathead screwdriver to open the panel door. Turn it counterclockwise. Remove the protective foam from shipping.
Inspect the internal components to ensure there is no damage from shipping.
Next, turn on the four toggle breakers and one rotary breaker by rotating them clockwise. Close the door and close the latch by turning it clockwise.
Plug in the power cord and then turn your panel on. You might hear the valve start to actuate once you do this. The system is now ready for operation
=====
Interested in Sterlitech Skid Mount Membrane Filtration Systems? Discover the best fit unit for your application here: tinyurl.com/wy...
For more information, contact us here: tinyurl.com/4j... or call us at 1-877-544-4420
#tutorial #howto #skidsystem #filtration #membranefiltration #ultrafiltration #nanofiltration #microfiltration #forwardosmosis #reverseosmosis #lifescience #biopharma #wastewatertreatment
#membranedistillation #scientific #scienceandtechnology #sterlitech #demo